Top 10 Best 140mm Fan

OPTIMISED FOR STATIC PRESSURE The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P14 is particularly suitable for use on heatsinks and radiators. HIGH QUALITY BEARING Thanks to an alloylubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. INNOVATIVE DESIGN The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation, the impeller was designed with a focus on minimzing the noise level. LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life. TECHNICAL DATA Fan speed 1700 RPM, Airflow 72.8 CFM123.76 mh 1700 RPM, Noise Level 0.3 Sone 1700 RPM, Pin 3-pin.

High performance cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 25.8 dBA, 150,000 h MTTF. Highly optimised low-noise design provides outstanding quietness of operation, excellent static pressure and strong airflow CFM, square frame for water cooling radiators and chassis ventilation. 1500rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control powerful airflow when required, virtually silent at idle. Streamlined redux edition proven Noctua quality, wide range of optional accessories anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc..

Nine airflow-optimized fan blades that reduce noise-generating turbulence. Long life rifle bearing gives an operating lifetime of 80, 000 hours. A fan speed of 1, 600 rpm for extremely high air pressure. Even at maximum speed, operates at only 36. 3 dBA. Product conception, design and quality control in Germany.

OPTIMISED FOR STATIC PRESSURE Fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators. 200 TO 1700 RPM REGULATED VIA PWM PST Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. EXTENDED LIFE SPAN A 10 C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature. TECHNICAL DATA Fan speed 2001700 RPM, Airflow 72.8 CFM123.76 mh 1700 RPM, Noise Level 0.3 Sone 1700 RPM, Pin 4-pin.

Heavy duty cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 3000 RPM, max. 41.3 dBA, 150,000 h MTTF. Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency. 12V 3000rpm model 41.3dB with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 800-3000rpm speed range. High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection. Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection.

Optimized fan blades for the highest performance. Small tip clearance and a fan frame with funnel-shaped air outlets for extremely high air pressure. Very silent operation even at maximum speed. 6-pole fan motor and fluid-dynamic bearing for less vibration and very smooth operations. Anti-vibration mounting with push pins and screwed installation option.

Premium quiet fan, 140x140x25mm, 12V, 4-pin PWM, max. 1500 RPM, max. 24.6 dBA, 150,000 h MTTF. Award-winning NF-A14 design has received more than 100 recommendations from international hardware websites and magazines. Square frame with excellent airflow and pressure performance ideal for use on water cooling radiators or as a case fan. 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, 1500rpm maximum speed. chromax.black.swap edition with attractive all-black design and swappable red, black, white, blue, yellow and green anti-vibration pads for colour-customising.

Premium quiet fan, 140x140x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 24.6 dBA, 150,000 h MTTF. Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance. Square frame design is ideal for water cooling radiators AIO or DIY, PC cases and other chassis intake exhaust, cabinet ventilation, etc.. 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 300-1500rpm speed range 1200rpm max. with supplied Low-Noise Adaptor. Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.

CORSAIR AirGuide Technology Utilizes anti-vortex vanes to channel concentrated airflow and improve cooling, whether used as intake, exhaust, or mounted to a liquid cooling radiator or heatsink.. Fluid Dynamic Bearing Lubricant between the shaft and bearing greatly reduces friction, ensuring exceptional durability and minimal noise.. Push Air Without Pushing the Decibels A low-noise 140mm fan blade spins as quietly as 31.0 dBA.. Keep Your System Cool Powerful PWM-controlled fan speeds from 400 RPM up to 1,600 RPM, pushing up to 84.5 CFM of air with 1.73mm-H2O of static pressure.. Zero RPM Mode Support Stops the fan entirely when sent a 0 RPM PWM signal, completely eliminating fan noise..

Unparalleled Cooling Performance The TOUGHFAN is a PWM controlled fan which is designed to perform at a maximum operating speed of up to 2000 RPM allowing unparalleled cooling performance.. Exceptional Blade Design Featuring extreme tensile strength and low thermal expansion coefficient materials, the fan blade is built with special liquid crystal polymer LCP, a compound which minimizes vibration when the fan is operating at full speed.. Metal-Reinforced Motor Hub The TOUGHFANs center is constructed with a full steel motor hub providing enhanced stability and durability.. The 2nd Generation Hydraulic Bearing The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation..