Top 10 Best 1s Whoop

1. Nazgul Nano 1S 73mm Micro FPV drone super small ,weight only 29g,can fit in your pocket. for TBS remote controller. 2. Powerful XING 0802 motors,brushless motors with more durability and longer lifespan than brushed motors. 3. Separated VTX for stable image transmission,lightweight micro VTX with 40 channels, 50mW output power and whip antenna. 4. High quality FPV experience,800TVL nano fpv camera only 1.7g. 5. Best customer service,when you have any problem ,please feel free contact us firstly.

SPI ELRS 2.4G RXMeteor75 ELRS 2.4G 1S drone equipped with the F4 1S 5A AIO brushless FC and SMD ceramic antenna, which integrates BLHeli_S 5A ESC and SPI ExpressLRS 2.4G receiver. It will provide pilots with a stable signal and long-range flying. M03 350mW VTXM03 VTX, an ultralight and high output power 5.8GHz analog VTX, is perfect for Meteor65 whoop drone for longer range flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones faster, longer and can easily fly across hinders. MotorPropsThe propulsion system of Meteor75 ELRS 2.4G version is upgraded. Updated with 0802SE 19500KV motor and gemfan 40mm 2-blade propellers, this combination further loses the weight of whole drone. The flying experience and stability are greatly improved, pilots can get a stronger experience of a powerful outdoor flight like a 2S whoop drone. BT2.0 ConnectorThe new ELRS 2.4G Meteor75 1S whoop drone comes with BT2.0 connector like other Meteor75 versions. It can support 9A continuous current and 15A burst while the PH2.0 connector just supports 4.5A continuous current. Solving the low voltage warning issue of PH2.0 connector on 1S brushless whoop when you start flying. NoticeAll ELRS receiver versions of BETAFPV are the default ELRS1.0 firmware version. If your Module is ELRS2.0, you need to upgrade the firmware of FC first. The receiver on the drone defaults to 500hz refresh rate Please check if the module also be set to 500hz. For more details, you can contact us via Amazon mail.

Upgraded version of Alpha A65, the newly designed canopy and body frame. Ducts to protect the sensitive environment or yourself. Can bind for TBS remote controller. Super light weight,only 24.5g. suit for fpv starter fpv beginner flying indoor or in the yard. Please contact us at first time when there is any problem. we will provide best service for you.

9A Continuous currentBETAFPV exclusive designed BT2.0 Connector AKA 1.0mm Banana connector which can support 9A continuous current and 15A burst while the PH2.0 connector is just support 4.5A continuous current. With this 300mAh 1S BT2.0 battery, all 1S brushless drone will gain powerful and perform perfectly. Discharge RateThe discharge of the BT2.0 300mAh 1S lipo is improved a lot that the voltage drops more slowly, so pilots can enjoy more flight time without disturb of low voltage warning by solving the problem of voltage sag. 1.0mm Banana Connector1.0mm Banana Connector is more durable in terms of fit and conductivity than crimped pin. Highly recommend to use our newest BT2.0 connector to get the best performance from this BT2.0 300mAh 1s battery. Flight TimeDischarge curve is higher than PH2.0 battery which means it can discharge more current in the same capacity and provide more power. You can get 2mins flight time in full throttle on Meteor65. Extra Adapter CablePilots can charge BT2.0 battery by PH2.0 charger with BT2.0-PH2.0 adapter cableNOT INCLUDED, no need to buy additional BT2.0 charger. But we also have BT2.0 Battery Tester charger for your need.

iFlight new 1s lipo battery- Fullsend 300mah 40C lipo battery.. Advanced battery technology, doubles your device's performance time.. very light weight and very compact size.. Reliable power for FPV tiny whoop quads.. Long shape of this battery makes it works best on Alpha A65 Tiny Whoop drone..

High capacity of 380mah 60C, Small size of 62 11 7mm, is the great choice of Tiny Whoop Blade inductrix. The battery connector is PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX. This 380mah HV 1S Lipo Battery gives an increase in performance, provide you more punch and longer flight times and only weight 8g per unit. GAONENG 380mah Battery is Great for brushed whoop motors of any size and brushless 1s and 2s whoops as well. Like snapper 7, betafpv6s, mobula 7, Beta65s, beta65x. Caution As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water.

TATTU 1S 300mAh battery, simple design, more flight time.safe, high-quality, bring you a higher-speed flight experience.. The TATTU 300mah 1s lipo uses JST-PH2.0 plug, weight is 9g with the larger capacity of 75C.. 300mah 75C large capacity, small size of 63.5116.6mm, it is the best choice for Tiny Whoop.. Note As an FPV battery, do not overcharge or overdischarge the battery. Do not place in high temperature conditions. Don't throw it into the fire. Don't throw it into the water.. If you have any questions or need any assistance, please feel free to contact us.

6-in-1 Independent Ports - This lipo battery charger can use six independent ports at the same time. There are three different types of battery connectors for each port Micro. MX, mCPX. Only charge 1S lipo batteries at the same time. Adjustable current - This 1S battery charger supports current adjustment from 0.1-1.0A, the charger supports LiPo battery charging and also supports LiHV battery. Multi-way charging sources - UP-S6 1S LiHV battery charger equipped with USB port 5V2.1A, can be used for charging iPad, mobile phone, digital camera, etc.. Multiple Protections - Lithium battery charger provides battery reverse polarity protection, battery overvoltage protection and DC input voltage protection to ensure your safety when using. Note - If there is any problem with the product you received, please contact us as soon as possible, and the power adapter is sold separately.

ONLY support LiPo 3.7V4.20V 1S battery. Support 0.2A0.6A charge current by switch button Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2. USB interface input suggested range 5V5 on 0.5-2.4A, suggested 2.4A or above. Charger plug Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. Need to consider width of battery. The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged..

The ultra 380mAh 1S LiPo Battery for Tiny Whoop Blade InductrixNeed PH2.0 UpgradeQuadcopter.. Battery Size62117.0mm, Weight 8gper unit, Connector PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX. The weight of the 380mAh 1S Lipo battery is 0.7g heavier than the 300mAh battery, better performance than it.. Newly developed chemistry 380mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation.. Note Don't over-charge, or over-discharge batteries. Do not use inferior chargers. Don't put it beside the high temperature condition. Don't use high current charging frequently..