Top 10 Best 3 Pin Fan Hub

SATA Cooling Fan Splitter Suit for 12V 3Pin fan 8 channels.Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.. Suit for 12V 3Pin fan 8 channels.Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.. Built-in double-sided adhesive This compact HUB easily fits inside your pc case. It can be used to fix the hub in the chassis.. 8 way without speed measurement and PWM function, you can manually adjust the gear position, start the fan at full speed LOW or low speed LOW, or turn off the fan.. EASY INSTALLATIONIt is very easy to setup. Connect your RGB items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power..

Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.. Widely Compatible The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.. Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.. Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean tidy.. Package contents 1 black 15.7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug..

Fan extension cable for PC computer motherboard fan, make you easier to DIY PC computer. The 4 Pin Fan Hub is a 4-pin female connector that supports both 4-pin and 3-pin fan cables and is compatible with all 4-pin and 3-pin housing fans.. 15-inch fan power extension cable with tinned copper wire core for use without affecting fan performance. The pc fan splitters with a 2.9MM thick adhesive backing that fits in the right place in the chassis for a clean and tidy look inside the PC case.. Sincere service If you have any questions or would like to know more information, please feel free to send an email. We will reply within 24 hours.

Power up to 5 PC Fans from a Single 4-Pin PWM Fan Header. Connector 1 Female 4-pin Connector 4 Male 4-pin Connectors1 for 12V CPU and 4 for case fans. Compatible with all 12V CPU and case fans with 4 pin or 3 pin connector PLEASE NOTE Do not exceed 12V , 2A total output.Please check your devices specification when to use the PWM fan hub.

01Supports up to 7 Fans 3PINPWM 4PIN5V 3PIN ARGB, Occupying only One 4-pin MB FAN Header System Fan or CPU Fanand One 5V 3-pin ARGB Header.. 02Powered by system PSU Sata connection to ensure 12V stable power for up to 7 fans.. 03Provides individually addressable RGB lighting with software control for unique lighting effects and colors.5V ARGB Header Compatible with Asus Aura, ASRock RGB, GIGABYTE and MSI RGB.. 04Easy and Quick Installation with a Compact Design, upHere P7P Fan hub allows you to easily attach on the back of the PC case using pre-installed double-sided tape.. 05Capable of connecting to 7 PC fans simultaneously for cooling the computer system. Each port has its own PWM function and the fan speed can be adjustedat the same time. The Fan hub draw the PWM signal from motherboard and feedback fan speed to the motherboard and draw an ARGB signal from this cable only the speed of Fan 1 can be identified by the system..

The 1 to 5 pwm fan splitter can supply power to 5 fans.. Come with double-sided tape, easy to install. Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean.. Compatible with all 4 pin and 3 pin case fans.. Package included 2 pack 1 to 5 splitter 5 way fan power supply cable. We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please dont hesitate to contact us, we will serve you our best..

1-to-7 PWM Fan HubThe fan hub splitter can support up to 7 fans. The extension cable offers greater flexibility between motherboard and CPU cooling fans.. PWM Functional Fan AdapterFan speed can be adjusted at the same time, only the speed of Fan 1 can be identified by the system. Speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM.. Widely Compatible The 1 to 7 splitter provides power supply and connectors for PC computer case internal fans.. Easy Installation Double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place.. Clean TidyBlack sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean tidy..

1-to-8 PWM connectors. 2200F capacitor provides stable voltage. Support speed detection for accurately controlling fans. PWM 4pin header x 8, compatible with 3pin cable Speed control function is unavailable for 3 pin fans. Attached 3 pin fans will run at maximum RPM.. Compact size at only 54mm W x 19mm H x 40mm D. Included 3M adhesive to apply anywhere within your case..

Toptekits Computerpc Case Fan controller Power Cable 1 Female to 10 Male 4Pin Fan Hub Splitter Cable for 3Pin4Pin PWM Cooling Fan. IDE Molex 1 to 10 way cooling fan splitter hub. Designed for 12V 4-Pin fan, support simultaneous starting of 10 channel 4-Pin fans, solving the problem of shortage of motherboard.. Widely used for PC computer water cooling system. Support PWM function fan automatic speed regulation. PWM interface is connected to CPU FAN interface on motherboard by PWM cable.. The orange interface is the dedicated interface for CPU fan, these black interface are conventional PWM fan interface. EVA double-sided adhesive can be used to fix the hub in the chassis.. Package includes 1X Toptekits 4Pin interface 1 To 10 Way PCB Adapter ,1X Toptekits SATA interface 1 to 10 way PCB adapter.

Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note Max current limit is 3A in total, check the spec of fan first.. In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface with speed detection function. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.. There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control.. If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..