Top 10 Best 3/8 Fuel Injection Hose

Specifications ID 389.5mm OD 2317mm. Minimum Bend Radius 3.9100mm. Wall thickness 3mm.. Parameter Working Pressure 300psi. Burst Pressure 1200psi. Temperature Range -40F to 257F.. Medium The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc.. Material The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant.. Application The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc..

SizeID 38 10mm, OD 23 17mm, Length 10FT.. Working ConditionsNBR Fuel Hose Working Temperature Range -40F to 257F. Working Pressure 300PSI. Burst Pressure 1160PSI.. Premium MaterialMade of premium NBR materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.. Applicable MediumNBR Fuel line can work with dieselbiodieselgasolineoilgreasewater and air, etc.. Wide ApplicationNBR Fuel Line Hose widely used in the fuel system, steam emission, oil cooling, please check the pressure of application before purchase..

Multi-fuel compatibility. Extremely low permeation rate. HNBR tube with thermoplastic barrier, aramid fiber reinforcement and CPE cover. Oil, heat, ozone, and abrasion-resistant cover. Meets SAE 30R14 T2 except for kink resistance, CARB and EPA non-road fuel lines.

Multi-fuel compatibility. Extremely low permeation rate. HNBR tube with thermoplastic barrier, aramid fiber reinforcement and CPE cover. Oil, heat, ozone, and abrasion-resistant cover. Meets SAE 30R14 T2 except for kink resistance, CARB and EPA non-road fuel lines.

Size ID 38 inch 9.5mm, tolerance is 0.4mm OD 0.63inch 16mm, tolerance is 0.5mm Length 5 feet.. Parameter Working Pressure 300psi Burst Pressure 1200psi Temperature Range -40F to 275F intermittent use at 302F.. Standard The fuel hose meets and exceeds the SAE 30R9, designed for high-pressure applications like fuel injection systems.. Medium Compatible with leaded and unleaded gasoline, diesel, biodiesel up to B100, E10, E15, E85, 100 methanol, ethanol, and gasohol fuels.. Material Made of FKMfluorine rubber inner, ECOEpichlorohydrin rubber cover and aramid fiber..

25 feet of fuel injection hose designed specifically for auto and truck fuel injection systems. Can be used with gasoline, ethanol, extended gasoline, oxidized sour gas, diesel fuel, biodiesel B5, B10, B20 and lubrication oil. Inner Diameter ID 38 .375 Outer Diameter OD .63. Working Pressure Max 100 psi Burst Pressure 900 psi. Temperature Range -29F to 275F -34C to 135C intermittent use at 302F 150C. Precision engineered and tested. Maintains full flow. Features high heat resistance. Highly durable. Ensures maximum performance.

20Ft Fuel Injection line with 6AN fittings The package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree and 38 braided fuel line. All the an fittings feature a reusable spin-lock connector. Universal Application The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine. Excellent Flexibility and Durability The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided CPE Synthetic Rubber The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength. Safety Features The 6an push lock hose working temperature range -40 to 350 -40 to 176. Maximum Working Pressure psi 500 psi. Bursting Pressurepsi 2000psi. Braided gas line Inner diameter 0.34 inch, outside diameter 0.56inch. Please measure before purchase. No Worry To Buy Excellently Sealed, no leaking. We offer 3-month after-sale service for the 6an 38 fuel hose fittings kit. Any problem you have, contact us directly by amazon message. Please Noted Professional installation and Adjustable AN Wrench is highly recommended.

HIGH-QUALITY MATERIAL - The 38 fuel line is made of 3-layers. The inner and the outer pipe are made of NBR rubber and the middle reinforcing layer is braided with polyester woven. Wall thickness is 3.25mm. Oil resistant, cold-resistant, and ethanol tolerance.. HIGH PSI RATING - The 38 hose has a pressure rating of 300 PSI Working Pressure, and holds up to a max of 1200 PSI. The 38 fuel line hose thrive across the temperature range of -95F to 257F. The 38 transmission hose has good retardancy and excellent corrosion resistance.. FLEXIBILITY - The highlight of this 38 transmission cooler hose is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this fuel tube makes it easier to install. It also results in more fluidity in transmission.. WIDE APPLICATION - The premium rubber construction of this 38 fuel line enables it to be compatible with any fuel including methanol and nitromethane, oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. ASLO FIT E85.. CUT THE SIZE AS YOU WANT - The 38 fuel line is 10 Feet 3 m, can be cut to size for all your applications.The length of the transmission hose makes it suitable for cross-platform use in engines. You can use it on both larger and smaller engines..

HIGH QUALITY MATERIAL - The 38 fuel line covered with high quality woven Nylon and 304 stainless steel braided CPE synthetic rubber to enhance flexibility and give a cool racing appearance.. NYLON BRAIDED - The 38 fuel hose can stand -104F to 302 F-40C to 150C 350 PSI Working Pressure Tolerance, the 38 transmission cooler hose has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect... FLEXBILITY - The highlight of this 38 fuel injection hose is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this 38 high pressure fuel line makes it easier to install. It also results in more fluidity in transmission.. WIDE APPLICATION - The 6an fuel line specially designed to compatible with any fuel including methanol and nitromethane, oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85.. CUT THE SIZE AS YOU WANT - The 38 transmission hose is 20 Feet 6 m, can be cut to size for all your applications. The 38 fuel line hose is also an excellent alternative to conventional fuel lines, the 6an hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance..

SizeID38 10mm, OD0.67inch 17mm, Length 16FT 5m Include 10-168mm304 Stainless Steel Duct Hose Clamps 10pcs a Pair Of Gloves. Material NBR. Upgraded versionThis is an upgraded version, the rubber is thicher, there are two fibers inside, which is harder and can withstand stronger pressure.. Working Pressure300psi. Burst Pressure 1450psi. Temperature Range -40F to 257F.. ApplicationWidely used in conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before perchase.. SatisfactionIf you have any problems ,take time to contact with us,we are in 24 hours service.