Top 10 Best 3d Printer Magnetic Build Surface

ALL NEW FUNCTIONALITY Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.. EASY MODEL REMOVAL The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.. CUSTOMIZABLE The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. SIMPLE INSTALLATION Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.. UNIVERSAL Works with all FDM printer models, and all heated and non-heated 3D printer beds..

ATTENTION BEFORE USEFirstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.. ALL NEW FUNCTIONALITY Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.. EASY MODEL REMOVAL The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.. CUSTOMIZABLE The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. SIMPLE INSTALLATION UNIVERSAL Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds..

Packing List 3PCSSUNLU 3D printer PEI magnetic build plate size 235235mm9.259.25inch. 3 pieces sheet in total 2 pieces of PEI Print Surface SheetGoldBlackand 1 piece of sticker base sheet.. Frosted SurfaceSUNLU PEI magnetic sheet printing board has smooth surface, which will not leave any trace on the bottom of the printed material. There is a good combination of hot melt material and printing layer, which can reduce the deformation caused by shrinkage and avoid warping.. Durability Easy to Clean SUNLU PEI magnetic build plate has long service life of stainless steel.SUNLU PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.. Stronger Magnetic DdhesionSUNLU PEI 3d printer bed more flexible and resistant to bending.Great first-layer adhesion,make sure the model can be firmly attached to the surface of the print platform.SUNLU magnetic 3D printer bed platforms had solid adhesion and the print went well.. Super Easy Print Removal SUNLU 3d printer platforms PEI is flexible and magnetic, making it easy to move off the platform and take away the printing model. The prints are pretty easy to remove once you're done printing..

Size PEI Sheet is 310mmx310mm12.2x12.2 inch for Makebot Replicato QID X-Pro FlashFoge Creator Ender 3.. Easy to install PEI Sheet is Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by tearing off the back paper, then align the steel plate on it. The side with PEI is upside to print on. Please peel off the protective film on the surface before printing.. 3 in 1 Build Plate Custom-designed PEI material to make your prints easy to adhere to the printing surface, flexible, removable.. When printing completed, please let thePEI Sheet cool down enough, then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.. Kindly Tips We have sticked PEI on the steel plate by machine, so you don't need to worry about the performance. If you receive the package but find the air bubbles or scratches, please don't worry, they are the surface layer, PEI will not be affected..

ALL NEW FUNCTIONALITY Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design. EASY MODEL REMOVAL The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. CUSTOMIZABLE The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. SIMPLE INSTALLATION Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate. UNIVERSAL Works with all FDM printer models, and all heated and non-heated 3D printer beds..

Please double-check before attaching the base plate sheet Stick half of sticker base sheet with coating surface sheet and lift it up. It is correct if both sheets can be lifted at the same time. If the two sheets can't be lifted at the same time, please rotate one of them 90.. Easy to InstallThe magnetic plate is very easy to install. The sticker base sheet has a good adhesive on the back side, just paste the base sheet to the printer heated bed, and then put the coating surface sheet on the base sheet, ready to print.. Good AdhesionThe magnetic built surface has a special coating layer, which makes the filaments can stick to the printed bed easily and reduces warping.. Easy to RemoveThe magnetic build plate is removable and flexible, just gently bend the print surface, remove the 3D printing model easily.. Fast Heat ConductionThe thermal conductivity of SUNLU magnetic build plate is very good, which can speed up the heating rate, and reduce printing waiting time.. Heating RangeThe heating range is 0-100 degrees, which is compatible with most FDM 3D printer filaments. PLAPLA PlusTPUABSPETGASANylonOthers.. Packing List 3PCSSUNLU 3D Printer Magnetic Build Plate. 3 pieces sheet in total 2 pieces of coating surface sheets and 1 piece of sticker base sheet..

SIZE 220mm x 220mm, Double layer, thickness 1.7MM0.07 inch. More Flat for Precision Super Flatness. Fast and uniform heating. More precise on printing, especially the bottom of the prints. Durability easy clean It is capable to work at 70C.Can be used repeatedly,resistance, Durable, Strong magnetic,Easy clean with alcohol. Simple Installation Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate. Widely used in all FDM printer models, and all heated and non-heated 3D printer beds.

Applicable 235235mm detachable magnetic 3D printer build surface for Ender 3 Ender 3 Pro Ender 3 V2 Ender 3 V2 New Ender 3 New Ender 3 S13 S1 Professional Ander 5 Pro 3D Printer. Reusable the bed surface can work at 70C, high temperature does not demagnetize,. Easy demoulding flexible soft magnet platform, strong flexibility, can be bent to take the mold, and the mold can be taken out by directly separating the membrane surface.. Easy Installation The build surface comes with an upper magnetic build surface and a lower magnetic adhesive base. Place the lower 3M adhesive surface on top of the normal build plate.. Note Please make sure the bottom and top layer of the soft magnetic sticker are firmly adsorbed before installation. If it doesn't stick, turn it 90 degrees and try again until they are fully absorbed and won't separate..

Easy to Remove the Print The preferred choice for 3D printer heated beds, just print on the magnetic construction board, remove the upper magnetic surface, carefully bend it, and watch the model fall into your hands. VS. tempered glass, it adheres better and is easier to fix, no more worrying about being broken. VS. carbon-silicon glass, it is more affordable and easier to remove the model.. Excellent Performance The magnetic bed is highly flexible and heat resistant, up to 70C without demagnetization. The heating speed is fast and uniform, ensuring that the bottom of the finished model is delicate and not warped. It is durable, easy to clean with alcohol and can be used repeatedly.. Easy to Install The build surface consists of an upper magnetic build surface and a lower magnetic adhesive base. Place the lower 3M adhesive surface on top of the 3D Printer build plate then you can start to print your models.. Customizable This magnetic bed replacement can be easily cut to any size. Compatible with most FDM printer models, such as Ender 3Ender 3 ProEnder 3 V2Ender 3 V2 NeoEnder 3 NeoEnder 3 S1Ender 5Ender 5 ProCR 20CR 20 Pro and other 3D printers which have a build plate smaller than 235235mm9.259.25in. Suitable materials PLA. Note Before installation, please make sure the bottom of the soft magnetic adhesive is firmly attached to the upper layer, if it cannot be attached, please rotate 90 degrees and try again until it is fully attached.Please don't use acetone to wipe the thin layer left by the models..

Parameters Suggestions for Use- The size of SUNLU magnetic 3D printer platform is 250250mm 9.259.25 inches and the thickness is 2mm 0.1mm. When pasting side A and side B, you need to find the corresponding north and south poles. If the two magnetic platform fall off easily after sticking, you need to adjust the angle and re-paste them.. Super Easy to Transfer Fast Heat Conduction- SUNLU magnetic 3D printer platforms are flexible and magnetic, easy to move out of the platform and take down the printed model. The printed content can be easily removed after printing is completed. The magnetic platform conducts heat better than the glass base plate and heats up faster, which can improve your printing efficiency.. Stronger Magnetic Adhesion Improved Printing Effect- SUNLU 3D Printer Magnetic Build Surface adheres firmly to ensure the model can be firmly attached to the surface of the printing platform. Good printing effect. Reduce printing failures such as layer shift and improve printing efficiency.. High Compatibility Easy to Use- SUNLU magnetic 3D printer platform is compatible with 99 of FDM 3D printer. Print without warpage. No glue is needed. The model is easy to paste, easy to take, and does not deform.. Caution- The item must be re-leveled after installation to avoid damage to the surface. When leveling the platform, please leave 0.1-0.2mm gap..