Top 10 Best 5/8 Fuel Hose

Size ID 58inch 16mm,OD 0.94inch24mm.Material NBR.. Working Pressure 290psi. Burst Pressure 1160psi. Temperature Range -40F to 257F. Minimum Bend Radius 6.3inch160mm.. Applicable Medium 58 id fuel line can work with dieselbiodieselgasolineOilgreasewater and air,etc.. Application SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, PCV system, please check size and application pressure before purchase.. EVIL ENERGY provide this product 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..

ID 58 inch 16mm, OD 0.9 inch 23mm, 10 AN NBR liner hose, 10 feet. Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines. Fuel Injection Hose Working Pressure 2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -40 to 275 degrees F. Push on lock hose designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc. The Fuel Lines for fuel injected systems, are oil resistant,cold-resistant and ethanol tolerance.

Nitrile tube that is spiral reinforced for enhanced durability. NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments. Vacuum rating of 24 inHg for sizes less than 12 in I.D., and 10 inHg for sizes 12 in to 34 in I.D. at ambient temperatures. Warning Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose MPI for fuel injection applications. Intended for use with fuels where MTBE concentrations are no greater than 15 by volume.

I.D. 58 or 15.9mm, o.D. 3132 or 24.6mm, wt. C 25, max WP 50. Shields fire-alcohol fuel vent hose resists gasolinealcohol blended fuel and is Fire resistant. It features a weatherUV resistant NBRPVC cover. This hose primarily used for fuel vent lines gasoline up to 85 ethanol blended fuelsdiesel fuels. The temperature ranges from -20 DegreeF to 160 DegreeF. Meets USCG type A2 Requirements for pleasure boats. Meets Saej1527 type A2 ISO 7840 type A2 and NMMACE type accepted standards.

APPLICATION- For racing fuel, pump gas, diesel, motor oil coolant etc. Nylon braided fuel hoses can be used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line.. WORKING ENVIRONMENT-Maximum Working Pressure725psi5mpa. Bursting Pressure2465psi17mpa. Working Temperature Range-40 to 338-40 to 170.. SIZE- length10 feet3M. Inner diameter0.56 inches 14.2 mm. Outer diameter0.79 inches 20.10 mm.. MATERIAL- Inner layerCPE synthetic rubbermiddle layer304 stainless steel wire mesh sleeveouter layerbraided nylon. Resistant to high temperature pressure abrasion and aging. Excellent flexibility and flame retardancy.. NOTE- Double check the hose size before bidding. Our rubber hose is compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT.NOT FIT FOR E85..

-10 AN, Length 2 feet. ID size 58, 15.9mm OD size 2932, 22.9mm. Material Made by High-Graded Nitrile Rubber NBR with Textile Reinforced, Covered by Elastomer. Works With Push-On Hose End Fittings, suit 400 510 series hose ends. For use with Fuel System, E85, E10, Oils, Ethanol, Lubricants and Coolant System. Operation Temperature Ranges from -40 C degree to 100 C degree. Working Pressure Rating 280 PSI, Burst Pressure is 800 PSI..

100 brand new, never been used.. Stainless Steel innter hose CPE synthetic rubberThe middle layer 304 stainless steel wire mesh sleeve The outer layer 304 stainless steel wire. Braided Nylon innter hose CPE synthetic rubberThe middle layer 304 stainless steel wire mesh sleeveThe outer layer High quality braided nylon. Operating temperature -40 Degree F to 350 Degree F. Application forracing fuel,pump gas,fuels with ethanol,alcohol based fuels,motor oilcoolant etc..

Cover resists heat, oil, ozone and weathering. Spiral reinforced construction. Tube has been upgraded to meet changes in fuel characteristics and resists heat and oil. Convenient 2-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard. Meets requirements of SAE J30R7 and DIN 73379 except for tolerances.

I.D. 58 or 15.9mm, odd. 3132 or 24.6mm, wt. C 25, max WP 50. Shields fire-alcohol fuel vent hose resists gasolinealcohol blended fuel and is Fire resistant. It features a weatherUV resistant NBRPVC cover. This hose primarily used for fuel vent lines gasoline up to 85 ethanol blended fuelsdiesel fuels. The temperature ranges from -20 Degree to 160 Degree. Meets USCG type A2 Requirements for pleasure boats. Meets Saej1527 type A2 ISO 7840 type A2 and NMMACE type accepted standards.

HIGH PRESSURE FUEL LINE features an nylon fiber braided outer cover and CPE synthetic rubber inner line. Maximum Working Pressure psi 500 psi. Bursting Pressurepsi 2000psi. Working Temperature Range -40 to 257-40 to 125.. The 10AN nylon braided fuel line kit includesFor cutting Fuel Line Splicing Tape,10pcs 10AN swivel hose ends,4pcs 10AN hose separator clamp and 58 braided fuel line 20 Ft.Hose Inner Diameter 0.56inch 14.29mm.Hose Outside Diameter0.82inch 20.83mm.. The nylon fuel line hose mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Not fit E85. This 58 fuel hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, etc.. Nylon fiber and stainless steel braid 10an cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use.Reference installation instruction included..