Top 10 Best Ammo Can Lock Kit

Comes with 5 Locking Hardware Kits. Ammo Can and padlock NOT INCLUDED. Works on 50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm ammo cans. Will work with medium size locks as large as 14 lock shackle. Stainless steel hardware which helps prevent rust, and no thread locking adhesive required. Includes installation directions gasket washer to keep ammo can watertight.

THE SAFER AMMO CAN - The lockable ammo box can be used to store guns and ammunition to prevent children and others from using it.. KIT INCLUDES - Stud, one large washer, one small washer, one neoprene washer, one grade 8 nylon locknut, and instructions for installation. Ammo can and lock are NOT included.. STAINLESS STEEL - Our quality stainless steel hardware prevents rusting and ensures your ammo is safely locked away. The can stays waterproof as the neoprene washer keeps water out of the ammo box.. EASY TO INSTALL - The lock hardware takes only a few minutes to install and is the easiest way to upgrade your ammo can to a lockable can or even a gun box.. ONE SIZE FITS ALL - Ammo box lock hardware fits 50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm ammo cans. The lock hardware will work with medium sized locks with up to a 14 lock shackle..

Why send step drill, which is beneficial to two holes in a line, is to let you better complete the work.. All of our lock bars and accessories are made of stainless steel and have a longer service life. The rubber gasket has good sealing and water resistance. The ammo can box in the picture not included. For correct installation, look carefully at the picture on the left.

Lockable Ammo Can These 50 cal ammo cans come with locking kit hardware already installed on the case.. Waterproof and Submersible - Rubber sealed to make sure your goods are protected from water and dust. Includes dessicant pack - To keep your metal ammo can safe from moisture. Keep your goods organized - Reusable and Stackable Ammunition storage box. 100 Satisfaction Guaranteed Try our ammo storage box risk-free with our money-back promise.

Ammo Can and lock in picture not included. Works on 50 Cal,Fat 50, 30 Cal, 20 mm, 40 mm ammo cans. Will work with medium size locks as large as 14 lock shackle. Kit includes The Stainless Steel stud, One large washer,. One small washer, One neoprene washer , One Grade 8 nylon locknut, and instructions..

ONE SIZE FITS ALL - Ammo box lock hardware fits 50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm ammo cans. The lock hardware will work with medium sized locks with up to a 14 lock shackle.. KIT INCLUDES - Stud, one large washer, one small washer, one neoprene washer, one grade 8 nylon locknut, and instructions for installation. Ammo can and lock are NOT included.. STAINLESS STEEL - Our quality stainless steel hardware prevents rusting and ensures your ammo is safely locked away. The can stays waterproof as the neoprene washer keeps water out of the ammo box.. EASY TO INSTALL - The lock hardware takes only a few minutes to install and is the easiest way to upgrade your ammo can to a lockable can or even a gun box.. 100 SATISFACTION GUARANTEE - We are so confident that you will love this kit that we offer a 100 guarantee on it. If for any reason it doesnt meet your expectations, return it for a full refund..

Ammo Can and lock in picture not included. Works on 50 Cal,Fat 50, 30 Cal, 20 mm, 40 mm ammo cans. Will work with medium size locks as large as 14 lock shackle. Kit includes The Stainless Steel stud, One large washer,. One small washer, One neoprene washer , One Grade 8 nylon locknut, and instructions..

The 50 Cal is also known as a M2A1 and is commonly used to hold 840 rounds of 5.56 Stenciling does vary on grade 1 and grade 2 cans. 50 Cal Inside dimensions 11 x 5.75 x 7, Outside dimensions 12 x 6 x 7.25 There is approximately an 12 inch protrusion when including the lock stud. Our New Ammo Can Man 50 Cal can is made to Mil Spec available blank or with stenciling. The grade 1 and grade 2 options are Military surplus and stenciling will vary.. Grade 1 Cans may have light exterior rust from storage, small paint dings, andor surface scratches. Stenciling will vary and may show wear such as fading. The inside of the can will be free from rust andor paint and the lid will be fully functional with all pins and a watertight rubber seal.. Grade 2 Cans will have light exterior rust from storage, paint dings, surface scratches and may also have spray paint. The inside of the can may have light rust or paint. The lid will be fully functional with all pins and watertight rubber seal.

Enough Quantity to Use and Replace you will receive 4 sets of box can lock hardware kits, coming in silver color, the quantity is enough and sufficient to meet your using needs and replacement needs. Compatible Information the box can lock hardware kit is compatible with 50 CalFat 5030 Cal 20 mm 40 mm metal cans, will be the practical accessory for you to use, and you can use it with confidence. Proper Size the locking hardware kit is suitable for medium sized locks with about 14 shackles, it is firm and not easy to fall off after installation, reliable to use, providing you with much convenience. Reliable Material the locking hardware kit is mainly made of quality stainless steel material, with fine workmanship, not easy to break, rust or deform, can be applied for a long time with confidence. Easy to Install if your box can lock hardware kit needs to be replaced, use this kit to replace the worn one, the gasket provides a good sealing and waterproof performance, practical to use.

The Fat 50 is also known as a PA108 and sometimes called a Saw Box. This can is similar to the 50 cal but a little wider and a littler taller Stenciling does vary on grade 1 and grade 2 cans. Fat 50 Inside dimensions 12 x 6.75 x 8.5, outside dimensions 13 x 7.25 x 8.75 There is approximately an 12 inch protrusion when including the lock stud. Our New Ammo Can Man Fat 50 can is made to Mil Spec available blank. The grade 1 and grade 2 options are Military surplus and stenciling will vary.. Grade 1 Cans may have light exterior rust from storage, small paint dings, andor surface scratches. Stenciling will vary and may show wear such as fading. The inside of the can will be free from rust andor paint and the lid will be fully functional with all pins and a watertight rubber seal.. Grade 2 Cans will have light exterior rust from storage, paint dings, surface scratches and may also have spray paint. The inside of the can may have light rust or paint. The lid will be fully functional with all pins and watertight rubber seal.