Top 10 Best Arctic 120mm Fan

OPTIMISED FOR STATIC PRESSURE During the development of the new P12 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. 200 TO 1800 RPM REGULATED VIA PWM Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at a minimum while maximum cooling performance is given when needed. MORE EFFICIENT TECHNOLOGY The motor is powered by a PWM IC of the newest generation, which allows the new P12 PWM to run much more efficiently than its predecessors. This saves energy without compromising the performance. EXTENDED LIFE SPAN A 10 C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature. TECHNICAL DATA Fan speed 2001800 RPM, Airflow 56.3 CFM95.65 mh 1800 RPM, Noise Level 0.3 Sone 1800 RPM, Pin 4-pin.

INNOVATIVE DESIGN Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure. TWO WAY INSTALLATION Blow warm air out of the case, draw cool air into your case. LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life. SAVE YOUR MONEY WITH THE FIVE PACK By buying this product you will receive five F12 Standard Case Fans, thus saving your money. TECHNICAL DATA Fan speed 1350 RPM, Airflow 53 CFM90.1 mh 1350 RPM, Noise Level 0.3 Sone 1350 RPM, Pin 3-pin.

INNOVATIVE DESIGN Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure. TWO WAY INSTALLATION Blow warm air out of the case, draw cool air into your case. LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life. SAVE YOUR MONEY WITH THE FIVE PACK By buying this product you will receive five F12 Standard Case Fans, thus saving your money. TECHNICAL DATA Fan speed 1350 RPM, Airflow 53 CFM90.1 mh 1350 RPM, Noise Level 0.3 Sone 1350 RPM, Pin 3-pin.

OPTIMISED FOR STATIC PRESSURE The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P12 is particularly suitable for use on heatsinks and radiators. HIGH QUALITY BEARING Thanks to an alloylubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. INNOVATIVE DESIGN The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation, the impeller was designed with a focus on minimzing the noise level. LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life. TECHNICAL DATA Fan speed 1800 RPM, Airflow 56.3 CFM95.65 mh 1800 RPM, Noise Level 0.3 Sone 1800 RPM, Pin 3-pin.

LOW TEMPERATURE Bionix gaming fans last four times longer thanks to the low temperature of the coil, therefore, we extend the warranty to 10 years. 200 TO 1800 RPM With a wide range of regulation and the PWM Sharing Technology PST, the BioniX F120 fan speed can be controlled synchronously with all your other fans together. PWM SHARING TECHNOLOGY PST LESS NOISE The PST ensures that all your fans listen to a single control signal, stop at low load, turn whenever necessary. OPTIMISED FAN DESIGN We have further optimised fan blade design for higher airflow with reduced noise. TECHNICAL DATA Fan speed 2001800 RPM, Airflow 69 CFM117 mh 1800 RPM, Noise Level 0.5 Sone 1800 RPM, Pin 4-pin.

OPTIMISED FOR STATIC PRESSURE During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. 200 TO 1800 RPM REGULATED VIA PWM PST Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors. EXTENDED LIFE SPAN A 10 C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature. TECHNICAL DATA Fan speed 2001800 RPM, Airflow 56.3 CFM95.65 mh 1800 RPM, Noise Level 0.3 Sone 1800 RPM, Pin 4-pin.

OPTIMISED FOR STATIC PRESSURE During the development of the new BioniX P120, special emphasis was placed on a focused airstream and thus a high static pressure. PWM SHARING TECHNLOGY PST PST ensures that all your fans listen to a single control signal, stop at low load, turn whenever necessary. EFFICIENT ENGINE MODERNISATION Thanks to sinusoidal magnetation, the new engine generates only 5 of the vibrations due to the switching of an ordinary DC motor. 200 TO 2100 RPM REGULATED VIA PWM PST With a wide range of regulation and the PWM Sharing Technology PST, the BioniX P120 fan speed can be controlled synchronously with all your other fans together. TECHNICAL DATA Fan speed 2002100 RPM, Airflow 67.56 CFM114.79 mh 2100 RPM, Noise Level 0.45 Sone 2100 RPM, Pin 4-pin.

INNOVATIVE DESIGN Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure. PERFECT CASE FAN REGULATION WITH PWM The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level. TWO WAY INSTALLATION Blow warm air out of the case, draw cool air into your case. LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life. TECHNICAL DATA Fan speed 2301350 RPM, Airflow 53 CFM90.1 mh 1350 RPM, Noise Level 0.3 Sone 1350 RPM, Pin 4-pin.

GREATER EFFICIENCY - LESS NOISE AT HIGHER AIRFLOW At low fan speed, the motor noise is key, a motor developed in Germany with a new alloylubricant combination reduced friction and noise. INNOVATIVE DESIGN Design of fan blades improves air flow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure. TWO WAY INSTALLATION Blow warm air out of the case. Draw cool air into your case. LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life. TECHNICAL DATA Fan speed 800 RPM, Airflow 37 CFM62.9 mh 800 RPM, Noise Level 0.08 Sone 800 RPM, Pin 3-pin.

LGA1700 COMPATIBILITY OPTIONAL The LGA1700 mounting kit available separately makes the entire Freezer 34 series compatible with Intel's new Alder Lake processors. IMPROVED HEAT DISSIPATION Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to an ideal heat dissipation for the Freezer 34 eSports DUO. FOR HIGH-END CPU The contact surface of the Freezer 34 eSports DUO heat pipes does not cover the full heatspreader, but is right where the processor DIE is and covers even the largest versions 18 core. EASY INSTALLATION SECURE HOLD Fast and easy to install, the mounting system of the Freezer 34 eSports DUO is compatible with Intel and AMD sockets, thanks to a backplate and its low weight it's also transport safe. IDEAL AIRFLOW The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-mode, the resulting increase of airflow ensures that the heat from the CPU is dissipated even faster. COMPATIBILITY The Freezer 34 eSports DUO is compatible with the Intel Sockets 2066, 2011-3, 1155, 1151, 1150, 1200, 1700 Kit available and AMD Socket AM4 If you are experiencing AM4 assembly problems, please stop and visit our FAQ.