Top 10 Best Arri K20015755

Install WaySmallRig BUN2501 attaches to ARRI-standard accessory mounts using a 38-16 screw and two locating pins. Built-in NATO Rail Features a NATO rail on the top, compatible with NATO accessories like SmallRig NATO Ball Head Arm 2071, SmallRig NATO Clamp 1973 or 2207, making it easy and quick to release devices. Prevent Sliding OffThe spring-loaded safety pins on both ends prevent your devices from accidentally sliding off. CompatibilityFit for ARRI Accessory Mounts. Low-profile design, 35mm long. NOTEThis NATO rail is the short one, and NOT compatible with SmallRig NATO Handles or Monitor Holders. If you want to mount those accessories, please take a look at SmallRig BUM2521.

14 Mounting PointsFeatures 14-20 screw on the top for monitor, light, or microphone. The bottom comes with a 14-20 threaded hole for more DIY options. 360 Sideways and Tilt 170The holder enables to swivel 360 sideways and tilts 170 with a free stop in any position. Maximum Load 1.5kgThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg. With Allen WrenchThe swivel and tilt mount has protective rubber padding on top and includes an Allen wrench for tightening the mounts for further security. The tightness of each axis is adjustable via the Allen wrench. NotePlease do use the Allen Wrench to re-tighten the thumbscrew for further security.

PACK of 4.

Powerful Light Output CB60 LED Video Light provides 60W bright and continuous illumination for vlogging, on-location shooting, wedding, portrait, and product photography.Brightness can be adjusted from 0 to 100 While please note via the knob on the back of the light increments by 1, via 2.4G remote control increments by 10. Ultra silent fanBuilt-in Ultra silent fan and stunning heat dissipation system can meet the shooting needs of different scenesproviding creators with a highly silent environment for video productions and improving their efficiency.The LCD panel shows legible readings on brightness, channel number, and real-time operating temperature. A protective cover keeps the LED from scratches.. Stable Reliable Lighting Stable 5600K daylight offers consistent lighting color for all your shots. CRI and TLCI over 97 ensure accurate color reproduction that helps take vivid and attractive photos and videos. Wireless Remote Control Use the 2.4GHz wireless remote to adjust the brightness from 0 to 100 or turn the light onoff within 66 20m. Ten selectable channels CH1CH10 enable you to control up to ten lights. Set the channel at CH88 and control all lights at the same time. Versatile Mountings Bowens Mount attaches various light-shaping tools, including reflectors, softboxes, and beauty dishes. The included mounting bracket offers 180 beam angle adjustment and features a hole for inserting umbrellas.

FOR DJI RS 2RSCSmallRig Sling Grip 3028 is specially designed for DJI RS 2RSC 2 gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your RS 2 or RSC 2 handheld gimbal easier with this Sling Grip.. 180 DEGREE ADJUSTMENTOffering 180 adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.. QUICK RELEASE CLAMPThe grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.. ANTI-SLIP DESIGNThe silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.. MULTIPLE MOUNTING POINTSMultiple 14-20 and ARRI 38-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905..

SMALLRIG Standard Rosette Bolt-On Mount M6 Thread 1939 is a multi-functional Rosette M6, 31.8mm diameter mount. There are three 14-20 and four M2 threaded holes on this rosette mount. It can be attached to a cage, rosette handle and other accessories. The stainless steel and aluminum alloy material make the rosette mount more sturdy and lightweight. The middle screw hole is M6, which just fit the ARRI Rosette with M6 screw. Such as the wooden handle 1891 and 1941..

Universal 14 38 Ball Head Monitor Mount --- Could be applied to plenty photographic accessories.. 360 Adjustable --- Could adjust to any angle you want for various shooting needs. Rubber Ring, Damping Adjust --- There's rubber ring on ball head to increase friction which helps controlling adjustment better.. ARRI Locating Pin Lock --- For better and more steady mount with your monitor if monitor comes with none locating pin, it also fits . Magic Arm Setup comes with Wide Wrench on Side --- It is super easy to lock or loose the mount.. Small Size Portable --- Made of Aluminum alloy only 126g and lightweight. Allows folding storage and easy to carry around with compact size..

LOCATIING HOLE FOR ARRI SmallRig 2165 is the first handle with locating hole for ARRI standard in the market. The handle has a simple and compact design and comfortable grip which offers user an excellent handheld experience.. MULTIPLE CONNECTIONThe 2165 is an all-in-one and half handle. It features multiple 14-20 and 38-16 threaded holes, multiple locating holes for ARRI and some built-in cold shoe mounts, thereby offering various mounting options.. ANTI-OFF DESIGNThere is a built-in anti-off pin on the top front of the handle to preventing cold shoe adapter from coming off accidentally.. CHANGEABLE PINSThe locating pins are able to installed horizontally and vertically, which is convenient to fix the camera firmly and stably.. SWEET DESIGNWith built-in magnetic suction design, the included Hex Spanner is ready for your assembly without fear of loss..

FOR MONITOR SMALLRIG Monitor Mount 2174 is designed to hold your monitor onto any cage or handle via 38threaded hole for ARRI standard. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios.. NOTEThe monitor mount is compatible with 5 inch or 7 inch monitor and supports monitor up to 1.5kg. Also, if a cage haven't locating holes for ARRI standard, you can mount optional Mini Plate 2171 via two 14 threaded holes first, then it allows to attach the monitor mount 2174.. ROTATION ADJUSTMENT Rotation axis enables this monitor holder to adjust the position of monitor up to 146 with only one hand for better monitoring as per your needs at different directions during shooting.. COMPATIBLITY The SMALLRIG monitor mount is compatible to SMALLRIG A7III Cage 2087, BMPCC 4K Cage 2203, Z6 Z7 Cage 2243, D850 Cage 2129, NATO Handle1955 and any cage or handle with 38 locating holes.. TOOLLESS INSTALLATION The monitor mount connect cage can be tighten by hands via the thumbscrew, which provide a quick release for users. Also, it comes with a hole for using the Allen wrench to re-tighten it..

FOR 5 OR 7 ONBOARD MONITORSmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. It features 14-20 screw on the top for monitor, light, or microphone.. SWIVELS 360 TILTS 170 The holder 2905 enables to swivel 360 sideways and tilts 170 with a free stop in any position. It enable you to position your monitor at the best viewing angle.. TIGHTNESS ADJUSTABLE The tightness of each axis is adjustable via the Allen wrench. The thumbscrew features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off. Note Please do use the Allen Wrench to re-tighten the thumbscrew for further secure.. RUBBER PADDINGThe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. Besides, it includes an Allen wrench for tightening the mounts for further secure.. HIGH QUALITYThe robust mount is CNC-Machined Aluminum and can support 5 and 7 monitor up to 1.5kg 3.3 lb, which makes it lightweight and durable at the same time..