Top 10 Best Arri L20008098

Compatibility SMALLRIG Top Handle with Locating Holes for ARRI 3765 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for Universal coldhot shoe mount. Lightweight Only 124g Hollowed-out design makes it weigh only 124g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone. Built-in Cold Shoe Mounts It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. Mounting Points SMALLRIG Camera Grip has an abundance of 14-20 and 38-16 mounting points for other accessories. An Allen wrench helps tighten the locking screw, making it easy to assemble and disassemble. Related Products 38-16 locating holes support Monitor Mount 2903, 2348 to attach monitors 14-20 threaded holes support Magic Arm 2070 for monitors.

Install WaySmallRig BUN2501 attaches to ARRI-standard accessory mounts using a 38-16 screw and two locating pins. Built-in NATO Rail Features a NATO rail on the top, compatible with NATO accessories like SmallRig NATO Ball Head Arm 2071, SmallRig NATO Clamp 1973 or 2207, making it easy and quick to release devices. Prevent Sliding OffThe spring-loaded safety pins on both ends prevent your devices from accidentally sliding off. CompatibilityFit for ARRI Accessory Mounts. Low-profile design, 35mm long. NOTEThis NATO rail is the short one, and NOT compatible with SmallRig NATO Handles or Monitor Holders. If you want to mount those accessories, please take a look at SmallRig BUM2521.

For 5 and 7 Monitor SmallRig adjustable monitor mount is designed to support 5 and 7 camera monitors via screw mount for ARRI on the top of camera cage or other mounting system. Dual Anti-Twist Design The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V V, and silicone pad to prevent the monitor from scratching and twisting. Quickly Tightened The mount can tilt 180 degree and and swivel 360 degree, different with the old mode 2903 using Allen Wrench, this upgrade monitor 2903B is quickly tightened via a knob to suit different angle. Multiple Threaded Holes Features locating screw for ARRI at the bottom to connect camera cage and 14-20 threaded holes for magic arm or stabilizer. 14-20 screw on the top support monitor, microphone, light, etc. High Quality Made of CNC-Machined aluminum alloy and stainless steel, sturdy enough to support and protect 5 and 7 filed monitor, different tilt angle has different load capcaity, 90 degree4.2kg, 45 degree2.5kg, 30 degree2.3kg.

SIDE HANDLE FOR CAMERA CAGESmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 14-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 14-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.. FOR RIGHT-HANDLEFT-HAND USEHighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.. ERGONOMIC DESIGNMade of aluminum alloy and plasticPCABS with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.. MOUNTING OPTIONSSmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.. LIGHTWEIGHT PORTABLEIt weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. Note The maximum bearing capacity of the handle is 3.5kg. Please do not overload. .

SmallRig Cold Shoe 2pcs Pack 2060 could be mounted on any camera accessories with 14 and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony a6500 a6300 a6500, cage for panasonic gh5 gh4 gh3, etc.. The counter bore hole in the center is attachable to a 14 screw, but the 14 screw will not touch the hot shoe contact of accessories mounted on the cold shoe.. There comes with two secure bending bevels on the one end to prevent accidental removal. The arrowheads on the cold shoe show the direction to mount additional accessories.. NOTE This Cold Shoe Mount is NOT suitable for DJI gimbal and NOT for ZHIYUN as well. For using on a cage, except for SmallRig Full Cage1661, you only need to lock it on the cage via the included 14-20 screw, the M2.5 threaded is unnecessary..

Arri Positioning Hole -The top handle is suitable for most camerasdigital SLR cameras, with ARRI holes, designed for handheld shooting, the top handle can easily shoot at low angles. Suitable for Sony A6400A6300 cage, Canon Nikon Sony Panasonic camera cage. Simple and sturdy -The top handle is made of aluminum alloy, non -slip, sharp edges, comfortable, and provides users with excellent handheld experience.. Rich possibility of extension -It with multiple 14 inches about 0.6 cm of 38 inches about 1.9 cm thread holes, 4 end -of -the -built cold shoe brackets, provide various installation options to explore your own own Strong style. -The handle is forward or afterwards, you can easily install shooting accessories. Standard 15mm NATO clip -The additional accessories for you to increase extended tube space, including microphones, LED lights, etc. No tube.. Note -It is not used directly for the camera, with an ARRI hole connection. Contains the inner hexagon wrench for fixing.

LOCATIING HOLE FOR ARRI SmallRig 2165 is the first handle with locating hole for ARRI standard in the market. The handle has a simple and compact design and comfortable grip which offers user an excellent handheld experience.. MULTIPLE CONNECTIONThe 2165 is an all-in-one and half handle. It features multiple 14-20 and 38-16 threaded holes, multiple locating holes for ARRI and some built-in cold shoe mounts, thereby offering various mounting options.. ANTI-OFF DESIGNThere is a built-in anti-off pin on the top front of the handle to preventing cold shoe adapter from coming off accidentally.. CHANGEABLE PINSThe locating pins are able to installed horizontally and vertically, which is convenient to fix the camera firmly and stably.. SWEET DESIGNWith built-in magnetic suction design, the included Hex Spanner is ready for your assembly without fear of loss..

SMALLRIG Standard Rosette Bolt-On Mount M6 Thread 1939 is a multi-functional Rosette M6, 31.8mm diameter mount. There are three 14-20 and four M2 threaded holes on this rosette mount. It can be attached to a cage, rosette handle and other accessories. The stainless steel and aluminum alloy material make the rosette mount more sturdy and lightweight. The middle screw hole is M6, which just fit the ARRI Rosette with M6 screw. Such as the wooden handle 1891 and 1941..

Material anodized aluminium alloy. 50mm 70mm 100mm NATO rail bar. Mounts via the slot with 14-20 screws. Anti-fall spring loaded pin on both ends. Fits standard NATO clamp for accessories.

Compatible with any camera accessories with ARRI style rosette adapter, eg. Niceyrig Sony A7SIII Cage 399 Niceyrig Rosette Mount NATO Rail 372. The ARRI rosette to 15mm rod clamp offers rich rig possibilities by connecting a standard 15mm rod, suitable for SLR camera and gimbal stabilizer rail block support system. The extension rod can be used for follow focus, EVF mount, or mounting attachments like microphone, monitor, recorder.. Secured the rosette mount tightly via a big wingnut. Made of sturdy aluminium alloy, CNC machined.