Top 10 Best Bikehand

APPLICATION Designed to prevent the handlebar and front wheel from moving when the bike is parked on a floor parking rack or on a repair stand.. WIDE OPENING Super-wide 120mm4.7 opening offers enough clearance for the displays mounted on electric bikes.. DUAL PROTECTION An elastic band is included to keep the holder in place. And the holder's whole body is wrapped by thick coating to protect bike frames from being hitting or scratching.. SPECS Length 385mm15.2. Weight 386g0.85lbs. Opening width 120mm4.7.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide 2 year warranty Made in Taiwan..

Freewheel turner.Hex key wrench set -22.53456mm.Lockring Remover. Freewheel remover for for Shimano.Crank puller for any type.Cartridge B.B. tool for for Shimano. Chain rivet extractor.Spoke wrench. Made in Taiwan, Great quality tool kit.Warranty 1 year.

SMART DESIGN The handle is specially designed to be used to remove crank arm off the BB without taking off the pedals. Please view our video in the listings.. FIT SQUARE TAPER ISIS BB Compatible with square tapered crank arms and an additional rotating tip for ISIS Drive and Octalink crank arms.. HEAT TREATED Heat treated high quality steel constructed for long time use.. RUBBER COATED Better grip with rubber coated handle which is long enough for more leverage.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

COMPATIBILITY This chain checker is designed to accurately measure when the chain reaches a .75 or 1.0 stretch and decide the necessity of chain replacement. Compatible with 7 to 12 Speed Chains including for Shimano Sram Campagnolo KMC and other brands.. EASY OPERATION Simply place the checker onto a segment of the chain then see whether the chain checker lies completely flat on the chain. If so, replace the chain. However, the chain is still good to use if the chain checker sticks upright at the 0.75 end.. PRO QUALITY AND COMPACT This precision laser-cut tool is well built and constructed with pro-quality material, forethought, and care for longevity and is easy to store. If you are still looking for a chain checker, this 2-in-1 chain wear indicator tool will satisfy your need and is undoubtedly the right choice for you Length 140mm5.51inches. Weight 32.8g0.07lbs.. WHY YOU SHOULD GO FOR IT As a consequence of the chain wear, increased wear of expensive rear cogs and chainrings will eventually appear. Therefore, routine checking for chain wear can prevent problems with shifting performance, and getting the worn-out parts replaced is more economical than a full change and saves bucks efficiently.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty Made in Taiwan..

Comes with Guage perfect for bicycle carbon parts,14'' Torque Fix Set, Torque range 2-24 NM, Tolerance in Accuracy - 4.. Allen Keys 3 4 5 6 8 10 mm, plus 5mm Longer Allen Key for easy use, T20, T25 and T30 Torques, High quality. Great for bicycle parts or bolts. Note please do not try to use cheap quality tools, they will damage the parts.. Note Stop turning when you feel a 'click'. 'Click' means the torque has reached a preset value.. ORDER NOW, WORRY-FREE We're so confident about the product quality that we can provide a 10-year warranty Made in Taiwan..

WHATS THIS FOR Sufficiently installing and removing the bottom brackets of Traditional Tapered, for Shimano Octalink, and ISIS Splined.. COMPATIBILITY Compatible with any 20-tooth cartridge type bottom bracket.. WHAT PAIRS WITH THIS Use it in conjunction with a 12 drive wrench or a 24mm open-ended shifter spanner. Recommend using a 12 drive wrench with ratcheting handles or torque wrench for better installation.. QUALITY MATERIAL Made of heavy-duty steel which makes this tool more durable, prevents the tools from wearing through the years of use, and is bottom bracket friendly.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a one-year warranty Made in Taiwan..

Application Tool For install and remove the crank arm dust cap. Compatibility Only compatible with Shimano 8 teeth internal splines dust cap. Top Quality Sturdy plastic material makes sure you do the maintenance with confidence. Weight Only 12g - Lightweight and convenient tools have always been the pursuit of professional cyclists. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide 1 year warranty Made in Taiwan.

MULTI FUNCTION HEX Bit 2 2.5 3 4 5 6 8 T10 T25 Phillips Chain rivet extractor with extra extender for 6-12 speed chain.. LIGHT COMPACT The total weight is only 230g or 0.5 lbs including the case. The mini chain extractor ensures that riders can carry the tool in the saddle bag or tool can.. QUALITY BikeHand only produces quality bicycle tools stands. The tools are made of high quality strengthened steel. Also they are all precisely machined to match the bolts perfectly.. HARD CASE All the tools neatly stored in a hard case. Well organized. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

EASY TO USE Use a finer 32 TPI blade when sawing a carbon post or steerer. An awesome bicycle workshop tool for cutting a Fork Steerer, Handlebar or Seatpost.. TOUGH STEEL CONSTRUCTION Made to last, heat-treated high-quality steel with a tough and shining looking as well. A useful tool for your bike repair collection.. FITS ROUND OVAL A lot of other saw guides would not take oval shape tubes. Our saw guide is able to cut round and oval fork steerer, seat post and handlebars. Size is up to 1-1431.75mm.. ACCEPTS THIN OR THICK SAW We listened to our customers' complaints and suggestions and here comes the upgraded version of this fork steerer cut saw guide which has an extra adaptor that you can add in the middle for an extra thick saw blade.. ORDER NOW, WORRY-FREE We're so confident about the product quality that we can provide a 2-year warranty Made in Taiwan..

A HANDY KIT This set includes 2 tools with handles, eliminating the need for additional tools. Use them for installing and removing Shimano, SRAM, and center lock-type disc brake rotor lockrings, as well as other compatible cassettes. For more details, please refer to the video in the listing.. COMPATIBILITY Suitable for all Shimano, SRAM, and other compatible cassettes commonly found on MTB, road, hybrid, and gravel touring bikes. Compatible with 7, 8, 9, 10, and 11-speed cassettes.. HEAT-TREATED Constructed from durable heat-treated steel to prevent rounding off through years of use.. RUBBER-COATED Features a rubber-coated handle for a secure grip, providing better leverage during use. The chain whip tool measures 11 inches in length, while the lockring tool measures 9 inches.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty Made in Taiwan..

Chain rivet extractor YC-336 for 7-11 speed for Shimano chain compatible, extra pin.Dust cap wrench YC-27.Chainring nut wrench YC-271.Flat 5mmPhillips screwdriver YC-611.8mm hex key wrench 12' adaptor YC-812LE. Flat screwdriver 3mm YC-612.Tire lever set YC-305D.YC-T20, YC-T25, YC-T30.Hex key wrench 22.53456mm YC-613-BK.3 Size bottom bracket wrench for for Shimano hollowtech II BB, BBR60 and BB9000 YC-307BB. Freewheel and pedal wrench YC-515 15mm x 2, 11-speed cassette compatible.Freewheel tool YC-126-1A.Cartridge bottom bracket tool YC-26BB-1A.Master link tool 2-way function YC-335CO.Chain hook YC-207. Crank puller with interchangeable adaptor, for for Shimano BB and ISIS drive YC-215CB.Hub spanner 1314mm YC-257A.Hub spanner 1516mm YC-257B.Hub spanner 1718mm YC-257C.Spoke wrench YC-8F Size 3.23.33.54.0mm. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a 2 years warranty Made in Taiwan..

CRANK PULLERTool for crankset with for Shimano spline, oversized and ISIS drive B.B. The tool with removable adapter fits both square and splined ISIS or Octalink axles. Drive with 15mm wrench.. BB TOOL To remove or install B.B. for Traditional Tapered, for Shimano Octalink, ISIS Splined Great quality ensures that it will not damage the BB teeth. Works with any 20-tooth cartridge type bottom bracket. Heat treated steel construction increases the durability and lifespan of the tool. Conveniently works with 12 inch drive or 24mm wrench.. STRONG THREAD High quality Workshop quality. The precise thread of this tool is very strong, so it will NOT damage the thread of cranks and bottom bracket.. HEAT TREATED The tool is made of heat treated hardened quality steel. It is long lasting little but powerful too. Weight 245g0.54lbs.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

FREE UP SPACE Looking for a solution to organize your garage to save floor space This is the one you've been looking for. This wall mount rack is great for use in a garage or apartment with limited space. Get organized by hanging the bike on the wall to free up some valuable space so there can be more room to store other items.. HIGH-QUALITY HEAVY DUTY RACK Made of premium powder-coated steel with anti-rust design. Anti-scratch coating and rubber padded on the pedal hook better protect your wall from dirt or damage. This set of wall hangers is designed to fit most bikes, including Mountain Bikes, Road Bikes, Kids Bikes, Hybrid Bikes, Cyclocross, and Lady Beach Cruiser Bicycles. Each hook can hold up to 20kg45lbs each bike.. NO TUNING HANDLEBAR The wheels are sitting again the wall. So no more turning handlebar or wheels which could be accidentally knocked. The easy-to-take design also makes it simple to take out or hang up your bikes and lets you hang or detach your bikes in a second. No more mess. EASY TO INSTALL Easy installation, high-quality stainless steel mounting screws, nylon plugs and anchors are included. Please note The pedal holder needs to be mounted on a Wood Stud or Solid Wall, while the wheel holders can be mounted on Plaster Wall, Drywall or Wood Stud.. ORDER NOW, WORRY-FREE We're so confident about our product quality that we can provide a lifetime warranty Made in Taiwan..

STRONG SOLID Tire levers are a toolbox essential. Metal enforced levers are extremely strong. Those can remove the most stiff tires such as wire bead MTB tires off the wheels easily.. GOOD GRIP The unique curved shape and finger grips make it super comfortable to use. Very comfortable in hand.. SIMPLE AND EASY TO USE Tire levers are small simple but very essential tools. After performing a scientific testing process to remove different tires off the wheels, those levers were developed by our engineers.. CLIP TOGETHER Clip 3 levers together, so you can find them whenever needed. Precisely machined clip system never fails.. WARRANTY Great tire levers must be with life time warranty. Please buy with confidence..

3 IN 1 The crown race setter fits all 3 sizes 1, 1-18 and 1.5. You only need one tool and never need to worry about buying a new tool in the future.. EASY TO USE Just place the crown race over the fork steerer. And smash it down to the end until the crown race perfectly sits flat on the fork using the setting tool. Please watch the video in the listing for more details.. QUALITY DURABLE The setter is made of high quality powder coated steel. Very strong and durable. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

ECONOMICAL Economical and simple tools for anyone looking for torque referring to tighten bolts. Torque Range 2-10Nm. Easy to use and read the torque.. PACKAGE Comes with common bit to be used on bikes. 14'' Drive Torque Fix Set,Torque range 2-10 NM. Tolerance in Accuracy - 4 . Allen Keys 2 2.5 3 4 5 6 8, PH2, T10 and T25.. PORTABLE Very light but useful tool. Weight 120g0.26 lbs. Length only 6 inch. Carry it in your handlebar or saddle bags. Share it with your riding mates whenever needed.. CARBON PARTS ESSENTIAL TOOL Over-tightening bolts can cause expensive damages to your carbon parts. Applying torque not enough can lead to loose bolts and becomes dangerous while riding.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a 2 years warranty .

COMPATIBILITY For installing and removing of 4-notches freewheels from BMX and Single Speed.. 1516 SPANNER Use with 24mm, 1516'' wrench spanner, Weight 76g0.16lbs.. QUALITY Made of quality hardened steel.. PERFECT MATCH Precisely machined to match the freewheel cup. Will not damage the freewheel.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty.

2 IN 1 CHAIN TOOL The chain breaker and quick-link installation tool all in one No matter a pro-level or a family use bike, you can always find this delicate tool easy to use and let you get back quickly to the ride of enjoyment.. UNIVERSAL COMPATIBILITY The chain tool is compatible with from single speed up to 12 speed. Got other pro brands Don't worry It's also compatible with Campagnolo and half-link chains.. PRO QUALITY When you receive this delicate tool, you will find that how strong and durable the quality is. The chain tool is built to last because of the well-made anti-rust coating and sturdy steel.. BONUS FEATURES A spare driving pin included which allows our dear customers to use this durable chain tool for a long time. A chain holder will be packed together as well, which helps you manipulate chains more accurately and efficiently.. ORDER NOW, WORRY FREE We're so confident about the product quality that we can provide a lifetime warranty.

LIMITATIONS Please check the size before buy. This is great for 29 and 700c Bikes. Too TALL for 27.5 26 bikes.. SOLID STABLE Solid one piece steel bike hub mount type. With 5 lbs weight and 11 inch wide base, this solid stand can hold the bike at ease.. COMPATIBILITY FIT 29 and 700c bikes It is best to be used with non-disc brake bikes as long as there is a gap between hub and frame. For 26 or 27.5 bikes, please look at the other model with lower or adjustable holding arm. YC-109L or YC-109AF. RUBBER COATING The holding arm are rubber coated to protect the frame and hubs. Rubber sleeve may wear and tear after a while. Do NOT worry, we have the sleeves for replacement.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a LIFETIME WARRANTY.

Updated and best collection , Chain ring nut wrench YC-271, Chain scrubber YC-790, Master link tool YC-335CO. cable cutter YC-767, Tire lever set YC-305D, Spoke wrench 3.23.33.54.0mm YC-8F, Chain hook YC-207. Pedal wrench YC-658-15S-4T, 8mm hex key wrench square adaptor YC-812LE,Chain wear indicator YC-503, Freewheel turnerPedal wrench YC-515,Bottom Bracket wrench, for Hollowtech II BB, BB-9000, BBR60 YC-307BB,Chain rivet extractor YC-324SC,FlatPhillips screwdriver YC-611, Hex key wrench 22.53456mm YC-613. T10T15T20T25T27T30T40T45T50 wrench YC-633-CP, Crank puller YC-215CB, Dust cap wrench YC-27,Freewheel remover YC-126-1A, Cartridge B.B. tool YC-26BB-1A. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

COMPATIBILITY Fits directly onto BIKEHAND bike repair stands only. Easy to install and disassemble. Foldable design for saving storage space. Perfect as a working platform to keep tools and supplies handy throughout the whole work.. MAGNETIC DESIGN Keeps the small parts, like bolts and screws, in place, making them really handy to access and no more mix-up.. MULTIPLE COMPARTMENTS 5 compartments are specifically sized to accommodate parts and supplies perfectly, keeping everything visible and ordered.. VARIETY OF SLOTS Heaps of slots in different shapes are designed to hold mechanic tools like Allen keys, screwdrivers, spanners and wrenches.. DURABLE It's made from engineering grade plastic. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a 1-year warranty Made in Taiwan..

SMART DESIGN This tool is specially designed for removing the crank arm off the BB without taking off the pedals. Please watch the video in the listings for more details.. FIT SQUARE TAPER BB ONLY Special design for threads and square tapered crank arm. Does NOT fit ISIS or Octalink crankset.. HEAT TREATED Heat-treated high-quality steel constructed for long-time use.. RUBBER-COATED The rubber-coated long handle provides better leverage and a comfortable grip.. ORDER NOW, WORRY-FREE We're so confident about our product quality that we can provide a lifetime warranty Made in Taiwan..

PLEASE CHECK THE COMPATIBILITY OF THIS TOOL BEFORE PURCHASE. DO NOT PURCHASE IF YOUR BOTTOM BRACKET ISNT A 16-NOTCH TYPE OR ISNT IN 44MM OR 39MM DIAMETER.. THIS TOOL DOES NOT FIT for Shimano Ultegra BBR60 6800 series and XT BB-MT800 DEORE XT M8000 series.. COMPATIBILITY I for Shimano Hollowtech II. BB type 16-notch, 44mm diameter external bearing bottom bracket cups. Compatible with some of the FSA, SRAM, and Truvativ bottom brackets too if the specs are the same. Also fits disc brake rotor lockrings with 16 external notches. NOTE It will fit for Shimano TL-FC24 and TL-FC25 adapters.. COMPATIBILITY II for Shimano Dura-Ace BB9000 and XTR BB93. BB Type 16-Notch, 39mm diameter.. HIGH-QUALITY This Bikehand YC-306BB is a double-ended bottom bracket wrench. 30cm whole length to provide great leverage and is made of high-quality heat-treated steel for improved functionality and longer life. We're so confident about our product quality that we can provide a lifetime warranty Made in Taiwan..

FUNCTION This wrench is designed to adjust the cone-shaped hubs of bicycle wheels, making it an essential tool in professional workshop.. DEDICATED DESIGN Its slim jaws, which are intended to fit into the tight clearances of an axle assembly, can be effortlessly slipped into other narrow spaces where a thicker wrench would be tricky to maneuver.. MATERIAL Constructed from solid steel and its black-painted finish for improved corrosion resistance.. COMFORTABLE GRIP Non-slip rubber grip for comfortable use and long handle offers enough leverage to get the job done easily.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a 2-year warranty Made in Taiwan..

EXTENSIVE COMPATIBILITY A precision pro chain tool designed to rivet chain links together as well as function as a chain breaker by pushing the pin out. Compatible with chains from single speed up to 12-speed, including Shimano, Campagnolo and half link chains.. EASY TO USE The adjustable end ring helps fit against the side plate evenly and securely, precisely accommodating the chains in different widths. Having this solid setting, the ergonomic grips make the removal even easier, reducing the potential damage to the chain.. UNIQUE DESIGN WITH A SPARE PIN This lightweight chain punch and the riveting tool are highly accurate and adjustable to fit various chain sizes. It comes with a spare spindle pin included in the package and a dedicated driving pin for Campagnolo chains on standby. Plus, a courtesy Shimano pin doubles the tool's service life.. BUILT TO LAST A LIFETIME Crafted from rigid steel construction and coated with heavy-duty rubber, this tool is designed for ultimate performance and long-lasting durability. Its compact size makes it the ideal choice for users of all levels, whether you're in the workshop, at home, or on the road.. ORDER NOW, WORRY-FREE We're so confident about the product quality that we can provide a lifetime warranty.

HANDY TOOL BikeHand Tools Master Link Pliers are designed to help remove and replace master links in modern chain systems, although not needed when new. Over time, with dirt and corrosion, it is impossible to separate the joining link by hand.. OPEN CLOSE 2 IN 1 TOOL Extremely easy to pull the link into its closed position. The pliers are also designed to open the master link which requires significant force for removal. Compatible with 5-12 Speed.. NON SLIP Rubber-coated handles ensure a soft non-slip grip. Quality spring would not fail even after years.. HEAT TREATED Heat treated high-quality steel constructed for a long time using.. ORDER NOW, WORRY-FREE We're so confident about our product quality that we can provide a lifetime warranty Made in Taiwan..

COMPATIBILITY Tool to remove the crank arms off the bottom bracket. Removable head allows fitting all ISIS and tapered type. Adatper removed for tapered, adapter for ISIS BB. STRONG THREAD High quality Workshop quality. The precise thread of this tool is very strong, so it will NOT damage the thread of cranks.. HEAT TREATED The tool is made of heat treated hardened quality steel. It is long lasting little but powerful too.. EASY TO USE You need a spanner NOT included and crank puller to remove the crank arm off. Please view the video in the listing.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

COMPATIBILITY The cutter is used to cut the bike shifter cables and brake cables. It is good to cut the cable outer too. The built in crimper points are used for crimping cable ends and hose ferrules.. CLEAN CUT The cutter jaw is made of very high quality, sharp and heavy duty steel. It cut all the cables cleanly. No more frayed cuts.. HANDLE LOCK Locking mechanism keeps jaws safely closed when not in use.. GRIP HANDLE It comes with grip handles for easier operating.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide 5-year warranty Made in Taiwan..

PRO QUALITY CHAIN WHIP PEDAL WRENCH A DREAMING TOOL 2 in 1 professional toolset of chain whip on one head, another head with two 15mm openings pedal wrench It is perfectly designed for installing and removing cassettes off the hub body, as well as mounting and disassembling pedals from cranks without scratching the crank arms. The chain whip tool is compatible with all Shimano, SRAM, and HG System 7 12 speed cassettes. NOTE This is NOT COMPATIBLE WITH screw-on type freewheel and Sram XD. VERSATILE LOCKRING TOOL The lockring tool keeps the cassette from rotating while removing and installing the lockrings from thru-axle hubs, and its heat-treated steel base can be used in conjunction with a socket or wrench. Compatible with Shimano HG, Sram, and other 24mm diameters cassettes.. MADE TO LAST The toolset is made of durable heat-treated steel which prevents it from bending and wearing off through years of use, while the ABS plastic long handles of the chain chip pedal wrench tool provide a secure and comfortable grip as well as better leverage during the operation. Chain Whip Tool Length 30cm11.6inches Cassette Tool Length 8cm3.2inches.. WHY YOU SHOULD GO FOR IT A multi-tool that can be used for removing and installing different kinds of cassettes and pedals and comes with a versatile locking tool that can be firmly connected to the wrench or socket tool even if you're wrenching off stubborn cassettes. This is an essential and perfect toolset that you can confidently add to your bicycle maintenance tool kit. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty Made in Taiwan..

COMPATIBILITY This tool is made to install and remove the freewheels with 12 splines, 22.6mm tool fittings including for Shimano, Sachs Aris, SunRace, DNP Epoch, and other 5 to 8 Speed freewheels. PLEASE DOUBLE-CHECK THE SIZE BEFORE MAKING A PURCHASE.. EASY TO USE Use with a 21mm wrenchsocket or 12 drive. The thin edge design makes the job easier by not removing the locknuts and cones beforehand.. SPECS Spline 12 splines Outer Diameter 22.6mm Weight 59g0.13lbs.. BUILT TO LAST Made of high-quality heat-treated steel for improved durability and longevity.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a 2-year warranty Made in Taiwan..

for Shimano 8-TEETH DUST CAP Compatible with 8-teeth caps on for Shimano Hollowtech II cranks.. SRAM RaceFace 16MM CAP Compatible with 16mm hex-shaped crank cap fittings including RaceFace, SRAM and Truvativ.. FITS 8MM HEX WRENCH 8mm hex fitting on both sides to offer more leverage for removing seized or overtightened caps.. MATERIAL Built from investment cast steel to maximum strength and longevity.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

COMPATIBILITY This tool is used to installremove the freewheels with 12-spline, 22.6mm tool fittings including for Shimano, Sachs Aris, SunRace, DNP Epoch and other freewheels and Cassette Lockring. Freewheel axle maximum 13mm.. EASY TO USE It features one-inch hexagonal base to use with wrench or socket. Its thin wall design makes the job easier without removal of the locknuts and cones.. BUILT TO LAST Made of high-quality heat-treated steel for improved durability and longer service life.. SPECS Spline 12 splines. Outer Diameter 22.6mm. Hole Use with 24mm wrench. Weight 31g0.06lbs.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a 2-year warranty Made in Taiwan..

COMPATIBILITY It fits two common fittings on adjustable cup-and-cone bottom bracket systems.. FOR 36MM FLAT CUP WRENCH One end fits fixed cup with 36mm wrench flats.. ADJUSTABLE PIN SPANNER Another end fits adjustable cups with pin holes. The pins on this end are replaceable.. MATERIAL Built from heat-treated quality steel to maximum strength and longevity. The rubber-wrapped handle offers comfortable grip to fulfill the work easily. Length 305mm12. Weight 319g0.7lbs.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

COMPATIBILITY Tool for install and remove for for Shimano HG or Sram cassette. Comes with the guide pin also 12mm thru axle adapter for stably installing and removing. Additional 12mm aluminum guide pin can attached on the regular guide pin.. TORQUE WRENCH Compatible with 24mm or 12'' driver torque wrench for more accurate installation. Weight 96g0.21lbs.. PRECISELY MACHINED The cassette tool is precisely machined to match the cassette lockring teeth perfectly.. HARDENED STEEL Heat treated high quality steel constructed for long time use.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

Vinyl coated handles are colour coded to make for quick size recognition. A classic spoke wrench, shaped for comfort and convenience. Black is for 80 gauge0.127 inches3.23mm, Green is for 80 gauge0.130 inches3.30mm, Red is for 80 gauge0.136 inches3.45mm. HEAT TREATED Heat treated high quality steel constructed for long time using.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

12 NOTCH 46mm For installing and removing of 12-notch external bearing bottom bracket cups with an outside diameter of 46mm.. COMPATIBILITY SRAM DUB, Race Face Cinch, Rotor BSA30, Zipp Vuma, Hawk Racing BB3086. 12 DRIVER WRENCH Use with 12'' driver wrench. Or please use a torque 12'' driver wrench for better installation.. PERFECT MATCH Precisely machined to match the BB cup. Will not damage the bottom brackets. Weight 53g0.1lbs. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

STYLISH ALLOY The hanger is made of aluminium alloy with STAINLESS STEEL bolts and coated by shinning painting, which lasts for a long time and looks gorgeous when a bike hanged on it. Outdoor available.. LARGE TIRE WHEEL COMPATIBLE The inside gap between wall and hanger is so big. Max rim depth 50mm. Mounting flange has 2 holes, allowing use of bolts or lag bolts to mount. You can switch the hanger if you want the bike to hang on the left or right of it.. EASY HANGING The hanger bar shape is a straight bar with a groove in the middle, compared with traditional hook. Very easy to hang your bike on it. Also the EVA coated hanger is so thick, it protects the rim better, such as carbon rims. Disadvantage There is no holder or plate , so the front tire may leave marks on the wall.. STRONG MOUNTING There are 3 straight mounting holes. Easy to mount on drywall stud and solid wall solid wall plugs and screws included. Please watch our video in the listing. Max Loading Weight 25 kg or 55 lbs.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

APPLICATION Used with any 38 drive torque wrench to make sure bicycle pedals are installed with an accurate torque spec.. MATERIAL Built from heat-treated high-quality steel to maximum strength and longevity.. SPECS Material Heat-treated steel. Thickness 4.4mm. Weight 77g0.17lbs.. ORDER NOW, WORRY-FREE We're so confident about our product quality that we can provide a 1-year warranty Made in Taiwan..

FUNCTION Made to remove the non-drive left side crank arm off. No damage to my crank arm or frame.. COMPATIBILITY Special tool for for Shimano XTR FC-M970 crankset.. DEDICATED DESIGN The 4-bolt side is used to tighten or remove the crank arm cap. The threaded side can be screwed on to press against the crank arm bolt, then pull off the crank arm fixing from the spindle.. EASY TO USE Screwdriver access hole for more leverage to get the job done easier.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

COMPATIBILITY It can be applied to disassemble the conventional Schrader and removable Presta valve cores. This double head inner tube wrench makes it possible for you to choose the suitable one to match your needs.. ADD-ON FEATURE 5mm flats designed for replacing Presta Valve Extender. This cut is where the removal tool resides to provide enough leverage to loosen the core.. LIGHTWEIGHT AND PORTABLE The valve core remover tool is a multifunction portable tool made of Aluminium, which weighs only 9g0.02oz. Its a must-have in your saddlebag, a handy tool accessory for cycling enthusiasts. EASY TO TIGHTEN Fits between spokes for quick and easy core removal, easily tighten or remove valve cores on any road bike and MTB tubeless valve stem.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a lifetime warranty Made in Taiwan..

COMPATIBILITY To remove or install internal bottom bracket for traditional Tapered, for Shimano Octalink, ISIS Splined BB. Please view our VIDEO in the listing to make sure that the turning directions are correct. The left and right BB's axle threads are different.. CENTER GUIDE PIN No more hold the removal tool horizontally onto the BB while turning. Just simply lock the center guide pin on the BB thread. Designed to remove those rusted bottom brackets easily.. EXTRA LONG Super long 13.8 handle with comfortable grip feeling. A lot of leverage to remove those BB which stuck in the bike frame.. PRECISELY MACHINED The slots are precisely machined extra heavy duty steel to match the BB perfectly. It will NOT damage the bottom bracket.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

EASY TO USE Quick way to measure the seatpost size or frame seat tube inside diameter. Just place the gauge inside the seat tube.. SIZE Measurement 34.9 31.8 31.6 31.4 30.9 30.8 30.4 30.2 30 29.4 29.2 28.8 28.6 28.2 27.4 27.2 27 26.8 26.4 26.2 26 25.8 25.6 25.4 25mm.. QUALITY Made of high quality aluminum. And the tool is precisely machined for its accuracy.. LIGHT The gauge weight 148g0.32lbs. Very light.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty .

CRANK COTTER PIN BEARING BALL DIAMETER Putting the cotter pin or metal ball through the dedicated holes, its diameter is clear at a glance. Cotter pin sizes 8 8.5 9 9.5mm. Bearing ball sizes 14, 732, 316, 532, 18.. SPOKE LENGTH Hang the head of the spoke in the oblong hole and read its length on the scale in both metric and imperial markings.. SPOKE NIPPLE SIZE Precisely-made square holes are used to measure the sizes of spoke nipples. Sizes 3.2 3.3 3.4 3.45 4 4.3mm.. MULTI-PURPOSE TOOL It's hardened and tempered stainless steel for maximum strength and satin-chrome finish prevents glare and corrosion for your work. Designed to provide accurate bike parts measurements, but can be also used as a professional tool for metalworking, woodworking, or engineering.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

BOTTOM BRACKET COMPATIBILITY for Shimano, SRAM and ISIS 8-notch bottom brackets. Outside Diameter 44mm. Center Hole Diameter 22.5mm. Weight 98g0.21lbs.. E-BIKE CHAINRING LOCKRING COMPATIBILITY Front chainring lockring for Bosch Gen 3 and Gen 4 e-bike systems, Specialized Levo Brose e-bike systems and other lockring with 8 external notches.. DUAL-SIZE WRENCH FLATS Its hexagonal base fits 32mm or 36mm open-ended wrench.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan.. Made in Taiwan. One year warranty.

INTENDED USE A 15mm open-ended spanner offers a narrower width to fit onto the commonly small gap provided. It is also a good fit to be used as a 916 spindle pedals wrench. The hex fitting little tool is used for pedals with no wrench flat which requires a 6mm or 8mm Allen Key to remove and install.. QUALITY MATERIAL Heat-treated high-quality steel constructed for a long time using. Professional Bicycle tool kit for installation and removal of pedals without scratching the crank arms.. PRECISELY MACHINED The slots are precisely machined extra heavy-duty steel to match the pedal spindles or bolts perfectly.. NON-SLIP HANDLE Non-slip rubber handgrip is applied to the wrench for better comfort.. ORDER NOW, WORRY-FREE We're so confident about the product quality that we can provide a lifetime warranty Made in Taiwan..

TOOLS 9 items crank puller, chain hook, chain tool, bottom bracket wrench, 15mm spanner, freewheel turner, dust cap wrench, cartridge BB tool, lock ring remover, 8mm hex key,wrenchsquare adapter.. HEAT TREATED Heat treated high quality steel constructed for long time using. Tough and perfectly match the BB notches, screws, spoke lock nuts, pedal spindle and crank arm thread etc.. GRIP Better grip with rubber coated handle and long enough for more leverage.. STORAGE BOX Every tool sits in a quality storage case for your convenience.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a 2 years warranty Made in Taiwan..

CASSETTE TOOL Essential tool to install and remove for for Shimano Sram or other compatible mountain or road bike cassettes and center lock type disc brake rotor lockring.. EXTRA LONG HEAT TREATED Extra-long handle for easily removing the rusted cassette from the wheel hub body. Heat-treated high-quality steel constructed for long time use. Please watch the video in the listing for details.. RUBBER COATED Better grip with the rubber-coated handle which is long enough for more leverage.. PRECISELY MACHINED The cassette tool is precisely machined to match the lockring perfectly.. ORDER NOW, WORRY-FREE We're so confident about our product quality that we can provide a lifetime warranty Made in Taiwan..

SOLVING SHIFTING PROBLEMS A misaligned bike rear hanger will result in bad shifting performance. This precisely machined tool will solve multitude of derailleur shifting problems, most especially with index shifting systems.. QUALITY GAUGE BAR Gauge bar made of heavy gauge, chrome plated steel. Easy to read.. FIT ALL WHEELS A longer, narrower alignment fit a wider variety of bikes. Compatible with 20 to 29 , 700c wheels. BETTER GRIP Rubber handle for better using experience. Length 460mm, Weight 876g 1.931lbs.

WHY A GUIDE IS ESSENTIAL A bike fork steerer Seatpost cut saw guide is used to ensure that the steerer tube and Seatpost of a bike are cut to the proper length. Your bicycles may not function properly or be stable if they are cut too short or too long. This guide tool helps to ensure that the cuts are made at the correct angles and lengths, which is important for the overall safety and performance of the bike.. OVERSIZED GUIDE Our especially oversized design provides increased stability and accuracy when cutting the steerer tubes, handlebar, and Seatpost. A larger guide also allows for more surface area to be in contact with the tubes, which helps to prevent the tubes from moving or bending while they are being cut. Using an oversized guide can be more convenient, as it eliminates the need to switch out guides when working with different tube sizes. This can save time and hassle in the long run.. COMPATIBILITY It can accommodate a wider range of tubes and oval Seatpost sizes. This is really useful for those who work on a variety of different bikes and need to be able to cut tubes of different diameters. Fits Airfoil shaped seat posts up to 80mm in diameter Fits round tubes from 25.4mm to 45mm in diameter. A 24-32 TIP hacksaw and any saw that has a blade that can fit into the guides slot are highly recommended.. PREMIUM QUALITY Made of top-tier metal which is super durable and will not wear out or break over time. Lightweight 490g17.28 oz. An extra space adapter is included for an extra thick blade. You can also use it with a bench vise or bike repair stand.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a 5-year warranty Made in Taiwan..

Free Up Garage Space It's great for garage,home,apartment with limited space.Hanging the bike on wall means free up valuable space. No more mess You have more space to storage other items solution to organize your garage free up spaceThis is the one you're looking for.. Heavy Duty Bike Hangers The hanger is fixed to the wall with 4 screws. Every hanger holds up to 25kg or 55lbs ,it securely hold a normal bike on wall.We highly recommend mount on stud. The easy-to-take design makes it easy to take out and hang up the bike. You don't need to worry the hook will scratch the rim,as the hook cover with rubber.. Suitable for Most Bikes Bikehand bike hanger is designed to fit most of bikes.Like Mountain Bike,Road Bike, Lady Beach Cruiser Bicycle etc. Fit all wheels size 14 to 29 in the range of the followings Max Tire width 2.4. Max rim depth for 700c 50mm with max tire width 25c.. Practical and durable Simply installed,no assembly required.The fixed hook lets you hang and detach the bike in a second.Space saving,great for shed corner and garage storage. Please watch our detailed video in the listing.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

DUAL FUNCTION An amazing 2-in-1 multifunctional tool needs to be added to your toolkit This tool is not only designed to repair minor damage on brake rotors but also designed to beautifully spread the pads without damaging the brake calipers.. ROTOR TRUING FORK One end that features three different slot depths, which are made with premium quality material and precisely manufactured to gently adjust bent or damaged brake rotors.. BRAKE PISTON PRESS This part is to separate the pads safely by sliding the end between the pads inside the caliper and pressing the pistons back into a brakes caliper gently. The wedge-shaped design makes it can slide into most hydraulic disc brake caliper bodies. NOTE Do not use it for brake systems that utilize ceramic pistons.. SLIP-FREE HANDLE Rubber-coated and ergonomically shaped handles provide a comfortable and reliable non-slip grip, as well as ensure long service life.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty.

EASY TO HOLD OPERATE Diamond shape slot design prevents position deviation and deformation of aluminum nipples. The rubber cover on both sides makes it stable to grip while working on your bike. This tool won't slip out of your hands easily when making adjustments to your spokes.. COMPATIBILITY It can be applied to adjust the most common sizes of spoke nipples 3.2mm, 3.3mm, 3.5mm, 4.0mm. The 4 in 1 tool makes it possible for you to choose the suitable one to match your needs.. STRONG DURABLE This spoke key is made of high-hardness steel to provide extra strength and for long-lasting use.. LIGHTWEIGHT PORTABLE The spoke wrench tool is a multifunction portable tool to align bike spokes straight and correct the deformation of the rim, which weighs only 41g0.09lbs. Its a must-have in your saddlebag, a handy tool accessory for cycling enthusiasts. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a lifetime warranty Made in Taiwan..

EASY TO USE Simply remove the rear wheel off the bike. Clamp the chain keeper or dummy hub on the dropout. Keeps chain out of the way when transporting or wrenching on your bike.. DUAL FUNCTION It is compatible with quick release dropout and 12mm thru axle.. CLEAN TRANSPORTATION YC-521 can be replaced freewheel for bike repair or chain clean Inserted into the right rear dropout when the wheel is removed for cleaning, storing, or transport.. COMPATIBILITY Quick release lever allows for fast installation and removal. Works with all derailleurs and 18 chain, works on frames with 9mm open-type dropouts.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

SOLID STABLE Solid steel bike hub mount type. Hub mount type is approved one of the most stable bike rack.. COMPATIBILITY Adjustable height to fit 24,26, 27.5 , 29 and 700c bikes. It is best to be used with both disc brake and non-disc brake bikes as long as there is a gap between hub, spokes, disc brake rotor and frame.. FOLDABLE PORTABLE - A simple pull-knob will allow to fold the stand into a flat shape within seconds, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore. Weight 1900g 4.18 lbs.. RUBBER COATING The holding arm are rubber coated to protect the frame and hubs. Rubber sleeve may wear and tear after a while. Do NOT worry, we have the sleeves for replacement.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

MULTI-FUNCTION This tool features a 15mm pedal wrench and 14mm15mm sockets, which are made for mounting and disassembling pedals from cranks without scratching the crank arms, as well as turning a nut or bolt without repositioning the tool on the fastener to improve work efficiency.. PREMIUM QUALITY This tool is made of durable heat-treated steel that will prevent it from bending and wearing off through years of use. The dual-density moulded extra-long handle provides better leverage and reliable grip during operation.. SPECS Length is 23cm9.05inches.. GREAT TOOL TO HAVE This is an essential and perfect tool that you can confidently add to your bicycle maintenance tool kit. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a one-year warranty Made in Taiwan..

SIZE 15mm Wrench to install and remove pedals without scratching the crank arms. 16mm and 17mm for the Cone Spanner. Length 278 mm. Weight 305g 10.8 oz.. HEAT TREATED Heat treated high quality steel constructed for long time using. Professional Bicycle 15mm wrench for installation and removal of pedal without scratching the crank arms.. PRECISELY MACHINED The slots are precisely machined extra heavy duty steel to match the pedal spindles or bolts perfectly.. NON SLIP HANDLE Non-slip rubber hand-grip for ease of use.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

COMPATIBILITY This AMAZING tool is specially designed for removing headset cups without scratching or damaging the frame. The versatile design of this tools four flared ends allows it compatible with the headset cups sizes 1, 1 1 or 25.4mm, 28.6mm 31.8mm. Please note that this tool is NOT COMPATIBLE with 1 or 38.1mm.. SOLID CONSTRUCTION Made of durable heat-treated aluminum alloy with a nickel finish that prevents it from wearing off through years of use, as well as provides strong corrosion protection that can withstand harsh environmental conditions.. EASY TO USE Insert the tool through the frame and pull it up until the flared four ends snapped in behind the cup, which generally happens when you hear a click sound. Since this tool can be used in conjunction with a hammer, we highly recommend a rubber hammer or a metal hammer with a block. After a few taps ONLY, then the cup will be easily driven out even if you remove the toughest ones. Note Commonly remove two headset cups from one frame.. SPECS Length 315mm 12.4 Weight 281g 0.61lbs. An essential bike tool that does its job perfectly and is to be added to your tool kit confidently. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty Made in Taiwan..

HEAT TREATED Heat treated high quality steel construction for long time use. Tough and perfectly match the bolts.. 9 SIZES COLORS Comes with a set of 9 size hex wrenches 1.522.53456810mm. Quality plastic slot also included in the deal for your convenience. Color coating is convenient for tool retrieval.. LONG Each wrench measures 9cm10cm11cm12.5cm14cm16.5cm18cm20.5cm23cm. This gives you more leverage, but still very stiff even with the smallest 1.5mm wrench.. BALL ENDS Ball hex ends allow up to a 25-degree entry angle to reach around obstructions.. WARRANTY We are so confident with the quality so we can offer life time warranty for home use only. Made in Taiwan..

BASIC TOOL KIT Chain Tool, Folding Tool , Spoke Wrench, Freewheel Chain Whip. Cassette Lock Ring Tool, 15mm Pedal Wrench.. QUALITY FOLDING TOOL Made of quality hardened steel for long lasting. With the most popular 22.534568mm hex key wrench , philips screwdriver, T25.. RUBBER COATED Better grip with rubber coated handle which is long enough for more leverage. Weight 955g 2.1lbs.. HARD CASE The tools are securely placed in a quality hard case for your convenience.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a 2 years warranty Made in Taiwan..

WHAT'S INCLUDED This 6 pieces precision bike cleaning brush set includes 1x cleaning brush with the water hose connector, 1x bristle soaping brush, 1x tapered brush, 1x sponge and bristle brush, 1x C-shaped brush and 1x gear clean brush.. EASY TO USE Durable and lightweight, this set of cleaning brushes is very easy to carry and use. The bristle soaping brush has a wide head for general cleaning on surfaces and frames. The tapered brush is perfect for getting into the hard-to-reach areas.. PRECISION CLEANING The sponge and bristle brush is made of dual-material material and is great for heavy-duty scrubbing. The C-shaped brush is made for cleaning the bike frame tubes and tires, while the gear clean brush comes with 3 different heads for removing grease and mud on the crank and corners.. MADE TO MAKE YOUR BIKE HAPPY Ergonomic design, the grip handles make the brushes really comfortable to be held. Use this set of tools on mountain bikes, road bikes, city bikes, hybrid bikes, BMX bikes and folding bikes to clean your bikes in a more efficient and easier way.. ORDER NOW, WORRY-FREE We're so confident about our product quality that we can provide a 2-year warranty Made in Taiwan..

INTENDED USE The Spoke Holder has 6 slots that are compatible with bladed spokes of size 0.8mm to 2.4mm. It eliminates the spokes effectively when truing, repairing or building wheels. Commonly used on mountain road bikes. NOT COMPATIBLE WITH ROUND SPOKES. EASY OPERATION Specially designed and precisely manufactured spoke can securely hold spokes to prevent twisting, provide a better grip, as well as allow multiple positions for optimal leverage and hand positioning during the spoke tension adjustment.. HANDS-FRIENDLY ABS plastic non-slip handle that is comfortable to hold and its surfaces provide a secure grip when in use.. SPECS Weight 29g 0.06lbs Length 129mm 5 inches.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty Made in Taiwan..

VERSATILE 2-IN-1 TOOL This crank bolt wrench is a versatile powerhouse, combining a 14mm socket and an 8mm hex wrench in one handy tool. It's designed for removing the crank bolt from the crank arm when you need to replace or repair the crank arm. Furthermore, it can be used for installing bike pedals with an 8mm hex bolt axle, such as Shimano SPD and SPD-SL pedals.. COMFORTABLE HANDLING The wrench boasts an ergonomically designed handle that comfortably fits in your hand, ensuring a secure grip and reducing hand fatigue. You'll appreciate the ease of use and enhanced control it offers while working on your bike.. MADE TO LAST Crafted from durable heat-treated steel, this wrench is not only durable but also built to withstand the rigors of bike maintenance. You can trust that it will remain in excellent condition even after years of use. Tool Length 230mm 9 inches Tool Weight 235g 0.65 lbs.. SIMPLIFY YOUR BIKE MAINTENANCE With this Crank Bolt Wrench at your disposal, you can make your bike maintenance tasks a breeze. Whether you're tightening crank bolts or installing pedals, this tool streamlines the process, saving you time and effort. It's a tool that every cyclist needs to keep their ride in top shape.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty Made in Taiwan..

QUALITY This Bikehand YC-25BB-29 and YC-25BB-30 bottom bracket installation tool is made of high-quality heat-treated steel for improved functionality and longer life.. COMPATIBILITY Compatible with the most model press-fit bottom bracket, SRAM DUB Press fit BB, PF92 BB30 PF30, bike frame with 41mm, 42mm or 46mm shell And for Shimano press-fit BB, BB 30 bearing and 24 mm bearing installation,-- Please ONLY use this on for Shimano or Sram press fit BB.. HOW TO USE 1.clean up the frame bb area, 2. grease the bb Cup 3. place the tool into the right position of the bottom bracket 4 use 8mm hex key NOT included and spinner NOT included please view the video in the listing.. SPECIFICATIONS Weight 393g0.86lbs, Long threaded bolts 200mm7.87inch ,2 x BB drifts YC-25BB-29, 2 x BB drifts YC-25BB-30 and washer .. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty .

COMPATIBILITY for Shimano 16-Notch X 44mm Fits 16-notch, 44mm diameter external bearing bottom bracket cups includes for Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King Bearings. Also fits disc brake rotor lockrings with 16 external notches. NOTE Will fit for Shimano TL-FC24 and TL-FC25 adapters.This DOES NOT FIT for Shimano Dura-Ace 9000 series and XTR 980 series, BB9000, for Shimano BBR60 Ultegra any 41mm 39mm outside diameter. QUALITY 30cm whole length to provide great leverage and is made of high-quality heat treated steel for improved functionality and longer life.. 12 INCH 12 wrench compatible. if you need more leverage or more accurate tightening torque, you can use a long handle 12 driver torque wrench. Please view the video in the listings. RUBBER COATED Better grip with rubber coated handle which is long enough for more leverage.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

HOLD WITH CONFIDENCE - Our versatile stand can extend up to 10'10 3.3m in height, and can be adjusted down to a minimum of 1.5m5'. Designed to securely hold up to 2 bikes with a total capacity of 40kg 89 lbs, that's 20kg 45 lbs per mount, you can trust this stand to keep your bikes safe and sound.. TAILORED BIKE STORAGE SOLUTION - Whether you're looking to save space in a garage or an apartment, our floor-to-ceiling 2-bike storage stand is your solution for a sleek, secure, and convenient bike storage system. Experience effortless bike storage with our patented Easy to Use locking mechanism, ensuring a hassle-free way to secure and organize your bicycles. Expertly engineered to fit your space and your lifestyle.. PREMIUM QUALITY - Constructed with top-notch aluminium alloy, this stand promises durability and strength. The rubber-covered foot and top safeguard your ceiling and floor against scratches, while the EVA-coated non-scratch hooks ensure your bike's finish remains perfect.. EASY TO SET UP - Installation is a breeze with our stand. It comes equipped with 2 cradles for holding your bicycles, 2 pre-installed knobs for easy height adjustment, and 3 pre-installed mounting brackets to offer versatile cradle positioning. Note This rack is specifically designed for two bicycles, with 3 mounting brackets to provide multiple setup options. For added flexibility, there are also 2 holes available for floor and ceiling mounting if needed mounting bolts are not included.. ORDER NOW, WORRY-FREE We're so confident about our product quality that we can provide a lifetime warranty.

SIMPLE PUSH-IN DESIGN - This stand is a versatile and convenient solution for storing and parking your bikes, and it's designed to accommodate wheel sizes between 20 to 29, including 700c wheels with a max. tire width of 2.4. Using the stand is a breeze, just push your bike into the rack, and the front holder will tilt, securely holding your bike in place. This innovative design is particularly useful for storing most of the bikes including road bikes, MTBs, kids bikes, beach cruisers, etc.. STABLE SECURE - Our bike stand is equipped with a high-quality spring holding system that ensures your bike remains stable and does not move within the holder. With all three points of contact firmly touching the tires, both the front and rear wheels can sit deeper for a secure grip, preventing any tipping over or wobbling. This design ensures that your bike's cassettes, hubs, derailleurs, spokes, and frames remain free from scratches and damage.. DURABLE RELIABLE - The premium quality rubberized feet of this stand provides excellent stability on various surfaces, preventing any unwanted movement or slipping. Not only does this stand to offer exceptional stability, but it is also highly resistant to scuffing, rust, and weather damage. Additionally, the stylish and dynamic stand base adds an extra layer of stability, making it nearly impossible for your bike to tilt unless extreme force is applied.. FOLDABLE PORTABLE - Another standout feature of this stand is its foldable design, allowing for easy storage and portability. With a simple one-pull-knob, you can easily fold this rack into a flat shape within seconds, making it ideal for storage or transporting in your car. This stand offers unmatched convenience, no more bikes lying on the ground or leaning against buildings or trees. When folded, it measures just 37cm x 44cm 14.5 x 17.3 and weighs only 2.7kg 5.9 lbs.. PREMIUM QUALITY - Constructed with heat-treated high-quality steel and finished with a stunning powder-coated coating that matches your bike's style. With proper care, this stand will last for years to come. ORDER NOW, WORRY-FREE We're so confident about our product quality that we can provide a LIFETIME WARRANTY.

APPLICATION Designed for the bench vises to hold hub axle and pedal spindles. Secure your parts in the proper position.. COMPATIBILITY Work with axle sizes 5mm, 9mm, 10mm, 12mm, 14mm, 20mm, 25mm, 30mm and 36mm.. EAST TO USE Just insert the axle into the opening and tighten in a bench vise. An essential tool for all mechanical apparatus to secure an object.. HANDY TOOL Size 1.1 x 5.1 29mm x 130mm. Weight 240g0.5lbs.. ORDER NOW, WORRY-FREE We're so confident about the product quality that we can provide a 2-year warranty Made in Taiwan..

WHATS THIS FOR For installing and removing 16-notch external bearing bottom bracket cups with an outside diameter of 39mm.. COMPATIBILITY for Shimano XTR BB93, Dura-Ace BB9000, and BB-R9100 bottom brackets. Also fits other 16-notch 39mm bottom bracket cups.. WHAT PAIRS WITH THIS Compatible with a 12 drive wrench or a 24mm open-ended shifter spanner. Recommend using a 12 drive wrench with ratcheting handles or torque wrench for better installation.. QUALITY MATERIAL Made of precision CNC machined aluminium alloy which makes this tool more durable and bottom bracket friendly. Weight 75g0.16lbs.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty Made in Taiwan..

WHATS THIS FOR For installing and removing 16-notch external bearing bottom bracket cups with an outside diameter of 41mm.. COMPATIBILITY for Shimano XT MT800 and Ultegra BBR60 bottom brackets. Also fits other 16-notch 41mm bottom bracket cups.. WHAT PAIRS WITH THIS Compatible with a 12 drive wrench or a 24mm open-ended shifter spanner. Recommend using a 12 drive wrench with ratcheting handles or torque wrench for better installation.. QUALITY MATERIAL Made of precision CNC machined aluminium alloy which makes this tool more durable and bottom bracket friendly. Weight 70g0.15lbs.. ORDER NOW, WORRY-FREE We're so confident about the quality of our product that we can provide a lifetime warranty Made in Taiwan..

LIGHT , STRONG PORTABLE The repair stand is made of full light alloy aluminum with heavy duty plastic strong head and clamps. It is light weight, and compact when folded. It is very convenient, durable and well-designed.. HEIGHT ADJUSTED Quick Release Adjustable 1m-1.5m or 39-59 Fully extended. The height, tilt, and angle all have quick release strong skewers. So that is very helpful when wanting to get the bike in the optimal working position for you.. ROTATED HEAD Smart design head rotated360 Degree by quick release and turning knob. The teeth and clamp are well made and heavy duty. It could hold max. 25 kg or 55 lbs bike at any angle.. TOOL PLATE Foldable magnetic tool plate included. Simply attach or remove the tool plate by hand for quick easy set up and storage.. DURABLE The bike workstand was released to the market for more than 10 years. It has been approved one of most reliable and durable bicycle repair stands available for home or shop uses. We can offer 5 years warranty on the rack and keep enough parts for any claim in our warehouse..

Patented SIMPLE PUSH IN DESIGN - Quick Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes.. MOST STABLE BIKE STAND There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.. FOLDABLE PORTABLE - A simple one-pull-knob will allow to fold the stand into a flat shape within a second, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore.. SUPERB DURABLE QUALITY STUNNING FINISH TO MATCH YOUR BIKE - Heat treated high quality steel with a fantastic powder coated finish. This stand will last forever if used appropriately. FITS NEARLY ALL BIKES The bike stand will fit almost all bikes range from Kids Bikes, 26 to 29 Mountain Bikes, 650c -700c Road Bikes, EXCEPT those bikes with the tires more than 2.4 in width.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a LIFETIME WARRANTY.

COMPLETE This Bikehand Tool Kit comes with a range of most common bike tools. It is very easy to use for regular bike service, such as cleaning chain, changing tire, changing bottom bracket, adjust shifter and brake cables.. HOME MECHANICS LEVEL Good value tool kit for home use. The new torque 2-10nm wrench is also included in the deal. The torque wrench is an important tool to tight carbon parts such as handlebar, stem and seatpost.. HEAT TREATED Heat treated high quality steel constructed for long time using. Tough and perfectly match the BB notches, screws, spoke lock nuts, pedal spindle and crank arm thread etc.. VIDEO We have uploaded a very detailed video in the listing to show how to use the tools. Please spend some time to watch it and to have a visual image of the products and learn how to use it before purchasing.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a 2 years warranty Made in Taiwan..

EXTRA HEAVY DUTY PORTABLE The repair stand is made of aluminum with heavy duty alloy and strong head and clamps. It is light weighted, and compact when folded. It is very convenient, durable and well-designed. Max Bike weight 50kg or 110 lbs. HEIGHT ADJUSTED Quick Release Adjustable 1m-1.5m or 39-59 Fully extended. The height, tilt, and angle all have quick release with strong skewers. So that is very helpful to get the bike in the optimal working position for you.. ROTATED HEAD Smart design head rotated360 Degree by quick release and turning knob. The teeth and clamp are well made and heavy duty. It could hold max. 50 kg or110 lbs bike at any angle.. TOOL PLATE Foldable magnetic tool plate included. Simply attach or remove the tool plate by hand for quick easy set up and storage.. DURABLE It has been approved to be one of most reliable and durable bicycle repair stands available for home or shop uses. We can offer 5 years warranty on the rack and keep enough parts for any claim in our warehouse..

Newest Complete Bicycle Tool Kit with Torque Wrench. The Bikehand Complete Bike Repair Tool Kit contains everything the home mechanic would need to maintain their bike. This tool kit is made with a very high quality standard which contains 23 items in it.. From tyre levers to bottom bracket installation tools, it will definitely help you to keep your bike well maintained. The torque wrench in the set allows parts to be fit to manufacturer recommended settings, without over or under-tightening which might damage the component. Using this kit to maintain your bike by yourself is absolutely going to save your cost. Tough Heat Treated Steel.

This free-standing floor stand is great when you still need the flexibility to move your bike around, whether its in your garage, bike store or at a race. Patent design awarded.. 2 pulleys design with adjustable position. Fits any bikes with wheel size from 24 to 29. Just a simple slide in and that's it Max tyre width 2.4 inch 60 mm . Either front or rear wheel slides in. Sitting in firmly to make the bike standing 100 stable. This rack only touches on the tyre, thus its great for any high end bikes. It brings no scratches on the bikes frames, disc rotors, cassettes, etc.. Package 1 bike holder. Required Assembly Tool Included. Solid Powder coated steel frame with rubber protected base. Perfect for cement or timber floor. Top quality with a LIFE TIME WARRANTY. Made in Taiwan. Product Weight 1.96 kg 4.35 lbs.

STABLE Very stable tripod aluminum alloy bike floor stand. The 3 legs design with 3 unique rubber holders ensures the stand is very stable even on uneven ground.This free-standing floor stand is great when you still need the flexibility to move your bike around.. QUICK RELEASE ADJUSTMENT The height is fully adjustable by quick release handle. The height adjustment rage is from 49 to 87.8. Quickly clasped stand for easy carry. 90 Assembled And Just Needs To Install The Hook Claw Bracket.. TILTING CRADLES The adjustable bike holderscradles tilt to hold bikes with sloping top tubes or aggressive frame geometries. Material Powder-coated heavy duty steel, sturdy and stable constructed. Padded cradles prevent scratching frame painting.. GOOD LOOKING QUALITY It is made of fine aluminum alloy material and with quality beautiful mat silver finish. Stunning finish to match your bike. Weight 6.34kg 13.95lb.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

COMPATIBILITY Accepts wheels up to 16-27.5 with or without tire and 29er 700c needs WITHOUT tire. Calipers accept rim width up to 3.8. Accepts hub width up to 150mm. Stronger, more comfortable knobs. Uprights move simultaneously to accommodate front and rear wheels.. VARIETYSpring-loaded calipers and caliper arm prevent binding. Nickel chrome plated heavy gauge steel. Smooth, accurate operation.Can be bench mounted or installed in a bench vice bolts not included.. EXTRA FEATUREIncluding bonus spoke tools Black is for 80 gauge0.127 inches3.23mm.Green is for 80 gauge0.130 inches3.30mm.Red is for 80 gauge0.136 inches3.45mm. SOLID METALWeight 7.80kg 17.20lbs.Made in Taiwan.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a life time warranty Made in Taiwan..

2 screws mounted either on the wood table or wall stud if necessary. Do not screw into unsupported or hollow wall.. Ball-type Hex Wrench and the T-handles are ergonomically perfect for comfortable use. The hex wrench set includes 2mm, 2.5mm, 3mm,4mm, 5mm, 6mm, 8mm, 10mm sizes. Made in Taiwan. Warranty Life time..

SOLID STABLE Solid one piece steel construction bike hub mount type. With its 5 lbs weight and the 11 inch wide base, this solid stand can hold the bike at ease.. EASY TO USEJust place the rear hub axle into the holder. Fast and simple bike parking solution.. COMPATIBILITY FIT 26, 27.5 and 700c bikes It is best to be used with non-disc brake bikes as long as there is a gap between hub and frame. For 29 bikes, please look at the other model with higher or adjustable holding arm. YC-109H or YC-109AF. RUBBER COATING The holding arm are rubber coated to protect the frame and hubs. Rubber sleeve may wear after using for a while. Do NOT worry, we stock the sleeves for replacement.. ORDER NOW, WORRY FREE We're so confident about our product quality that we can provide a LIFETIME WARRANTY.