Top 10 Best Bmpcc 6k Pro Cage

ONLY FOR BMPCC 6K PROSmallRig Full Cage 3270 is specially designed for BMPCC 6K pro. It would not block any buttons on the camera. It can also be disassembled and used as a half cage. It fits the body perfectly, hence a comfortable grip experience.. ANTI-TWIST FUNCTIONHighly secure via a 14-20 screw on the top and two on the bottom to prevent wiggles and comes with rubber pads at the bottom to prevent scratching. Lightweight design with only 300g, the cage is made of aluminum alloy, with matte surface and strong oxygen resistance.. MULTIPLE MOUNTING POINTSIt is equipped with multiple mounting points, such as 14 38 threaded holes, cold shoes, NATO Rail and locating holes for ARRI, allowing you to connect more accessories such as SmallRig Quick Release Nato Rail 1409 and Smallrig Top Handle 2362, etc. Bottom Slot for Samsung T57 SSD and suits HDMI USB-C cable clamp to ensure stability and smooth data transmission while shooting.. FEATURED RECOMMENDATIONSIt could attach Swivel and Tilt Adjustable MountHolder 2903 2904 for the monitor. Locating holes for ARRI on the top are compatible with Top Handle 2165 for handheld shooting, or it could be mounted with NATO Rail Handle 2270 2187 for better shooting. It could be mounted with HDMI USB-C Cable Clamp 3271 and T57 SSD Mount 3272 to improves compactness.. BOTTOM STRUCTURESmallRig Cage 3270 incorporates multiple threaded holes on the bottom to attach Quick Release Plates 1280 2146 and RS2 stabilizer and a built-in spanner for easy disassembly..

PROTECTIVE ARMOR for BMPCC 6K Pro Minimizes Wear and Tear Over Time.Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro. MOUNT ACCESSORIES via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 14-20 Threads with Locating Pins.. QUICK RELEASE TOP HANDLE Provides More Flexibility When Operating and Handling.The included Quick Release Top Handle can be attached to the top of the cage via a cold shoe receiver and -20 screw. This provides an extremely secure connection to comfortably handle and operate your camera system.. The Top Handle features additional -20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs.. RECORD TO SSD via the T7 Drive Holder and Mountable USB-C Cable.The SSD Drive Holder attaches directly to the Cage via a 14-20 screw and locating pin. It can then clamp onto a T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port.. 15MM ROD SUPPORT When Using Battery Grip Extension Bracket.An included 15mm rod mount can be installed to support 15mm rods in front of the camera body when using the Battery Grip in the Half Cage setup..

A Great 5-in-1 Setup for Professional ShootingSmallRig Professional Cage Kit 3583, which comes with cage, dual rod clamp, cable clamp, SSD mount, uiversal top handle, is a great idea for professional shooting. The cage works with a removable Pogo Pin and can connect directly for Blackmagic Pocket Camera Battery Grip for power supply and comes with multiple 14-20 threaded holes to support other accessories.. Fits for 15mm Riser Systemthe cage kit comes with lightweight dual rod clamp with standard 15mm rod hole, which suits 15mm dual rod, and is ideal for mounting Follow Focus 3010 and Matte Box 2660 or Mini Matte Box 3196 for easy and quick focus control in video shooting.. Comfortable Handheld Experience The kit also includes Top Handle 1984 for handheld shooting. The thumb cable clamp help to clamp HDMI and USB-C cables to prevent signal interruptions caused by cable loss during filming.. SSD Mount Included Comes with a universal SSD mount for Samsung T5T7 SSD. It secures to the cold shoe on the top left of the cage and fixes the SSD via extendable spring-loaded clamps on both sides. The mount serves as a sound solution for BMPCC 6K PRO camera using SSD.. What's in Box1 x Cage 3517 1 x Dual Rod Clamp 1943 1 x Cable Clamp 3271 1 x SSD Mount 3272 1 x Universal Top Handle 1984 7 x 14-20 Screw 1 x Allen Wrench.

PROTECTIVE ARMOR for BMPCC 6K Pro Minimizes Wear and Tear Over Time. MOUNT ACCESSORIES via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 14-20 Threads with Locating Pins. QUICK RELEASE TOP HANDLE Provides More Flexibility When Operating and Handling. POWER RECORD via the Advanced Power Handle with Included Run Stop Cable. 15MM ROD SUPPORT via Battery Grip Extension Bracket or 15mm LWS Baseplate.

For BMPCC 6K ProSmallRig Camera Accessory Kit 3299 is specially designed for BMPCC 6K Pro. The package include Camera Cage 3270Top Handle 2362Side Handle 2187Sunhood 3273SSD Cable Clamp 3300HDMI Cable Clamp 3271NATO Rail 2172Screen Protector 3274.. Mutifuctional CageSpecial designed aluminum-alloy full cage 3270 can be split as a half cage.The built-in Mount for T5 SSD takes up very little space and improves compactness and suits SSD USB-C cable clamp to ensure stability and smooth data transmission while shooting. Featuring with multiple 14-20 threaded holes that support additional camera accessories. The threaded holes on the bottom support to attach Quick Release Plates 1280 2146 and stabilizer of DJI RS2.. NATO Top Handle Side HandleThe NATO top handle 2362 can rotate 360 degrees and secures to any cage with nato rail on the top or side, and features multiple 14-20 and 38-16 threaded holes for accessory attachment. The NATO side handle 2187 fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly.. Screen ProtectThe sunhood 3327 is easily removable and does not interfere with the flip of the screen, hence a better screen display under strong outdoor light. Besides, the kit provides two pieces of tempered films that can be easily pasted onto the screen via electrostatic adsorption to protect the screen.. Cable ClampThe built-in Clamp for T5 SSD USB-C Cable Clamp is further locked by a knob to prevent accidental disconnection during shooting..

Upgraded for BMPCC 6K ProSmallRig Full Cage Advanced Version 3517 is specifically designed for BMPCC 6K Pro to fit its original battery grip.. Facilitate Power SupplyWhen the cage works with the removable Pogo Pin connector, it can be directly attached to the original battery handle to supply power.. Multiple Mounting PointsThe cage has a locating hole for ARRI standard, 14-20 threaded holes and cold shoe on the top, where you can attach Top Handle 2165. The left side has a NATO rail and 14-20 threaded holes for mounting Side Handle 2187. The HDMI USB-C Cable Clamp 3271 can be attached to ensure the stability of the hard disk and the stability of data transmission. The holes at the top-right corner and bottom-left corner can attach the follow focus rod clamp.. Full Access DesignThe form-fitting cage does not block ports, card slots, vents and battery doors. Its right side is ergonomically designed for a comfortable grip experience. Moreover, there is a built-in screwdriver on the bottom of the cage for the assembly. The cage comes with shoulder strap holes on the top of each side for a shoulder strap or other accessories.. Anti-twist Anti-scratchThe cage firmly locks via threaded holes on the top and bottom to prevent twisting. It also has rubber pads on the bottom to prevent scratching..

PROTECTIVE ARMOR for BMPCC 4K6K Minimizes Wear and Supports Many Accessories. MOUNT ACCESSORIES via Cold Shoe, 14-20 and 38-16 Threads. TOP SIDE HANDLES Provide More Flexibility When Operating and Handling. RECORD TO SSD via the Drive Holder for T5 and Mountable USB-C Cable. 15MM ROD SUPPORT Secure 15mm Rods to your System for Matte Boxes, Follow Focus Systems and Battery Plates.

ONLY FOR BMPCC 6K PROSmallRig Full Cage 3382 is specially designed for Blackmagic Design Pocket Cinema Camera 6K Pro and its related battery grip. It would not block any buttons on the camera. It can also be disassembled and used as a half cage. Furthermore, it adopts ergonomically design on right side, hence a comfortable grip experience.. ANTI-TWIST FUNCTIONSmallRig 3382 firmly locks via a 14-20 screw on the top and two on the bottom to prevent wiggles, and comes with rubber pads at the bottom to prevent scratching. Lightweight design with only 355g, the cage is made of premium aluminum alloy, with matte surface and strong oxygen resistance.. MULTIPLE MOUNTING POINTSIt is equipped with multiple mounting points, such as 14 38 threaded holes, cold shoes, NATO Rail and locating holes for ARRI, allowing you to connect more accessories such as SmallRig Top Handle 2165, and SmallRig SSD Holder 3300 for Samsung T5 SSD, etc.. FEATURED RECOMMENDATIONSIt features a NATO rail and multiple 14 threaded holes on the left side, that could attach NATO Side Handle 2187 for handheld shooting and dedicated HDMI USB-C cable clamp 3271 for stable signal. The holes at top-right corner and bottom-left corner allow access to follow focus rod clamp 3276. Its bottom is compatible with dual rod clamp 1943, ensuring the distance between the dual rods and the center of the lens is 85mm, and allowing installing lens support.. SWEET DESIGNStrap slots are included to add a wrist strap or neck strap for your camera to prevent dropping. Besides, with built-in magnetic suction design, the included screwdriver is ready for your assembly without fear of loss..

PROTECTIVE ARMOR for BMPCC 6K Pro Minimizes Wear and Tear Over Time. MOUNT ACCESSORIES via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 14-20 Threads with Locating Pins. QUICK RELEASE TOP HANDLE Provides More Flexibility When Operating and Handling. RECORD TO SSD via the Samsung T7 Drive Holder and Mountable USB-C Cable. 15MM ROD SUPPORT When Using Battery Grip Extension Bracket.

PROTECTIVE ARMOR for BMPCC 6K Pro Minimizes Wear and Tear Over Time. MOUNT ACCESSORIES via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 14-20 Threads with Locating Pins. HALF OR FULL Detachable Design Allows More Flexibility in Different Shooting Situations. ARCA COMPATIBLE Bottom Plate Allows for Quick Mounting to the DJI RS 2. BATTERY GRIP Compatible via an Adjustable Bottom Plate.