Top 10 Best Boat Paint Fiberglass

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition. COVERS COMPLETELY IN JUST ONE COAT High-solids primer seals the surface with 1 thin coat apply a second coat only if a higher build is needed to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer. EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING Use a natural bristle paint brush, a 18 solvent-safe foam roller, or to spray, use a 1.1mm tip wear proper personal protection work in a well-ventilated area boat primer is chromate-free and lead-free. DRIES FAST, CURES TO A SMOOTH, HARD FINISH Ready to sand in 60-90 minutes at 65F marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint. AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brushroller application - thin with TotalBoat Special Brushing Thinner 100 spray application - thin with xylene do not apply Topside Primer thicker than recommended or it may not cure properly.

DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention. EASY TO APPLY 1-Part formula provides professional results with just a brush and roller roll tip method can also be applied by spraying for use above the waterline. SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean will not fade, crack, or peel easy to touch up ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim. VERSATILE TOPSIDE PAINT Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces not for continuous submersion on boat bottoms that remain in the water longer than 72 hours. CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts Gallons. Coverage 350-400 sq. ft.gal. White, Black Gray also available in flat finish. Primer TotalBoat Topside Primer or TotalProtect metals.

ANTIFOULING PAINT FOR BOATS Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season ideal for fiberglass, wood and steel boats in salt water and fresh water. ABLATIVE BOTTOM PAINT Self-polishing coating wears away gradually as the boat moves through the water minimizes bottom paint build up so you have less sanding to do next season durable finish can be burnished for smoothness, speed fuel efficiency. LOW ODOR, LOW VOCs, EASY CLEANUP This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water ideal for use in marinas and boat yards with environmental restrictions no maximum dry time before launch. EASY TO APPLY BY BRUSH, ROLLER OR SPRAY Brush - natural bristle Roller - 316 nap or foam solvent-safe cover Spray - airless or conventional if needed, thin with water, up to 10 apply 1-2 thin coats no sanding needed between coats. AVAILABLE IN BLACK, BLUE, GREEN RED COLORS in Quart and Gallon sizes Coverage 500 sq. ft. per gallon. Compatible with most previously applied bottom paints Apply over existing ablative or hard bottom paints for use on boat bottoms hulls below waterline only.

NON-SKID DECK PAINT Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives. LONG-LASTING POLYURETHANE FINISH Durable coating won't fade or peel easy to clean - scrubbing won't wear away the finish affordable way to bring your old boat flooring back to life. NON-SLIP PAINT WITH MANY APPLICATIONS Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing. 1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces add a second coat for greater traction. Coverage 250-300 sq. ft. per gallon. COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS Sand Beige, Kingston Gray, Light Gray, White tintable with TotalBoat Wet Edge Topside Paint. Available in Quarts and Gallons.

ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection copper biocide keeps barnacles and mussels from clinging to hull bottoms ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions. EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat best for boats used frequently durable finish withstands trailering beaching better than traditional ablative paints. FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS because the ablative coating wears away during the season, there's no paint buildup, which makes your bottom paint job easier next season. EASY TO APPLY Use a natural bristle brush, or a 316 nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING 10 brushroller - TotalBoat Special Brushing Thinner 100 spray equipment - TotalBoat Spray Thinner 101. AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage 500 sq ft per gallon this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only it is not intended for household use.

MARINE BOTTOM PAINT FOR MULTI-SEASON PROTECTION IN HIGH FOULING CONDITIONS High copper content 38 cuprous oxide for maximum antifouling protection against barnacles slime for sailboats power boats in fresh, salt and brackish waters. SMOOTH, ABRASION-RESISTANT FINISH FOR MAXIMUM PERFORMANCE Offers maximum speed and fuel efficiency can be burnished for a racing finish advanced copolymer ablative formula offers continuous antifouling protection whether the boat is at anchor or underway. HAUL AND RELAUNCH WITHOUT REPAINTING Hauled your boat for longer than 2 weeks Simply scuff lightly to reactivate this paint's antifouling properties ablative formula reduces paint buildup, which means no heavy sanding next time you apply bottom paint. EASY TO APPLY, DRIES FAST Apply by brushing, rolling or spraying on fiberglass, wood, steel and previously painted surfaces in good conditions. THINNING Brushroller application - TotalBoat Special Brushing Thinner 100 Spray application - TotalBoat Spray Thinner 101. AVAILABLE IN BLACK, BLUE, GREEN RED COLORS in Gallon size Black and Blue are also available in Quarts Coverage 500 sq ft.per gallon NOTE This paint has no maximum dry time before launching your boat is required.

CAMOUFLAGE MARINE PAINT Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint.. LONG-LASTING FINISH This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish.. FOR A VARIETY OF APPLICATIONS This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers.. EASY TO USE Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container.. FOR ON-SHORE AND OFF-SHORE APPLICATIONS Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors..

Ideal for use on wood or fiberglass surfaces above the waterline. Applies as a base coat to ensure for better adhesion of topcoats and longer-lasting finishes. Dries to the touch in 1 hour and covers 100 sq ft. Durable, corrosion-resistant primer sands easily and works on bare, lightly rusted and previously painted surfaces for maximum protection. Allows finishing paint to dry to an even gloss with an elegant look. Enhances the gloss and appearance of top coats. Not for surfaces below the waterline. Can be applied to previously painted surfaces. Recommended for aged, cracked, checked, pitted and rough surfaces. This item is not for sale in Catalina Island.

EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for clear coating. Simple mix ratio of 2 parts resin to 1 part hardener. NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low VOCs make it great for shop or indoor use. Cured surface is BPA-free, safer for potential food contact. CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium Hardener is ideal for most applications. Fast Hardener has the shortest working time and fastest cure. CHOOSE EPOXY KIT SIZE Pint, Quart, Gallon or 2 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps, mixing sticks and mixing cups. Compatible with epoxy thickeners, fillers and coloring agents. PUMPS INCLUDED Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin.

ENAMEL MARINE PAINT Get a long-lasting, elegant haze gray finish on your boat, bridge, or other marine structure with Duralux Marine Enamel.. LONG-LASTING FINISH This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish.. FOR A VARIETY OF MARINE APPLICATIONS This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures.. EASY TO USE Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container.. FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.