Top 10 Best Camper Tow Hitches

Compatibility anti rattle hitch tightener works with Classes III, and IV Hitch Receivers 1.25 and 2, hitch stabilizer 2 inch. This hitch clamp will keep your trailer hitch from shaking and rattling when you drive down the road.. Durable and Heavy-Duty The rubber coated U-Bolt and .31 thick black powder coated plate with anti-rattling stabilizer enables this to withstand all weather conditions and loads.. Perfect Fit Adjustable fit and high quality materials ensure a quiet and stable towinghauling experience. Perfect for hitch receivers, hitch racks, hitch anti rattle, anti rattle hitch pin and more.. Convenient and Easy Installation Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place with the included hardware. Trailer hitch accessories.. What's Included Trailer hitch stabilizer with rubber coated U-bolt, tightener plate, 2 lock washers, 2 flat washers, and two nuts with complete instruction..

Kit Includes 1,200 lbs. weight distributing hitch, sway control and 2-516 hitch ball. Ready-To-Go Hitch ball and Sway Control Ball Pre-installed and torqued to specification on adjustable ball mount. Pre-Installed U-Bolts and Chain Package Located on spring bars. Durable and Strong 1,200 lb. maximum tongue weight capacity maximum gross weight rating of 12,000 lb.. Easy to Install All mounting hardware Included. Includes 1,200 pound weight distributing hitch, sway control and 2-516 hitch ball. Hitch ball and sway control ball are pre-installed and torqued to specification on adjustable ball mount. U-bolts and chain package are pre-installed on spring bars. 1,200 pound maximum tongue weight capacity. Maximum gross weight rating of 12,000 lbs.

LEVEL TOWING. This weight distribution hitch offers a smoother ride and improved control by distributing the tongue weight of the trailer across the vehicle-trailer combination and leveling the load. It also includes a trailer sway control bar. CONTINUOUS LUBRICATION. This CURT weight distribution hitch with sway control is equipped with an integrated lubrication system for smooth, quiet towing. The hitch head has two easy-access grease zerk fittings for continuous lubrication. RELIABLE STRENGTH. This load-leveling hitch is constructed with a fabricated head and has 31-316-inch long forged steel spring bars. It is rated to tow 8,000 to 10,000 lbs. gross trailer weight and 800 to 1,000 lbs. tongue weight. STANDARD FIT. To ensure maximum versatility, this stabilizer hitch comes with a highly adjustable 2-inch shank that fits virtually any industry-standard 2-inch trailer hitch receiver. It also includes a pre-torqued 2-516-inch trailer ball. CORROSION-RESISTANT. For long-lasting resilience to the elements, this weight distribution hitch with sway control is covered in a durable carbide black powder coat finish.

ACTIVE SWAY CONTROL. The TruTrack doesn't just level the vehicle and trailer. It also actively resists trailer sway. It uses a spring and cam system and fixed support brackets to stop trailer sway at four distinct points for a smoother, safer ride. PRECISE WEIGHT DISTRIBUTION. The TruTrack weight distribution hitch with sway control offers precise levelling of your tow vehicle and trailer. It uses powerful 35-916-inch trunnion spring bars and an adjustable shank that fits a 2-inch receiver. EASY SETUP. This CURT weight distribution hitch with trailer sway control is designed for fast, easy setup and adjustment. It features a tilting head with hex castle nuts for easy adjustment without completely disassembling the hitch. HIGH-STRENGTH. For dependable towing strength, this weight distribution and anti-sway hitch is constructed with a welded head and cast steel pieces. This stabilizer hitch is rated for 8,000 to 10,000 lbs. GTW and 800 to 1,000 lbs. TW. CORROSION-RESISTANT. This weight distribution hitch with sway control is finished with a highly durable carbide black powder coat to withstand the rigors of the outdoor elements.

Weight Distribution Hitch with bolt-together ball mountshank assembly and sway control. Black polyester finish resists rust and corrosion. Lift brackets allow safe and easy hitch hook-up. Interchangeable spring bars fit left or right sides of hitch head. Includes assembly hardware and chains.. 8 inch total height adjustment, rise is 5-58 inch, drop is 2-38 inch, shank length is 10 inch, ball to pin hole is 12-34 inch. Dual sway control platform Balls not included 1-14 inch hole on head assembly requires 1-14 inch shank on trailer ball. Weight distribution hitch rated up to 1,200 pounds - Gross trailer weight 12,000 pounds. 2-516 inch trailer ball and sway control included.

DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight limited to lowest-rated towing component. VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer. EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 72 inches wide. FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing. RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage.

DEPENDABLE STRENGTH. This RV trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight limited to lowest-rated towing component. VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer. EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 66 inches wide. FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing. RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage.

ACTIVE SWAY CONTROL. The TruTrack doesn't just level the vehicle and trailer. It also actively resists trailer sway. It uses a spring and cam system and fixed support brackets to stop trailer sway at four distinct points for a smoother, safer ride. PRECISE WEIGHT DISTRIBUTION. The TruTrack weight distribution hitch with sway control offers precise levelling of your tow vehicle and trailer. It uses powerful 35-916-inch trunnion spring bars and an adjustable shank that fits a 2-inch receiver. EASY SETUP. This CURT weight distribution hitch with trailer sway control is designed for fast, easy setup and adjustment. It features a tilting head with hex castle nuts for easy adjustment without completely disassembling the hitch. HIGH-STRENGTH. For dependable towing strength, this weight distribution and anti-sway hitch is constructed with a welded head and cast steel pieces. This stabilizer hitch is rated for 5,000 to 8,000 lbs. GTW and 500 to 800 lbs. TW. CORROSION-RESISTANT. This weight distribution hitch with sway control is finished with a highly durable carbide black powder coat to withstand the rigors of the outdoor elements.

Spend more time making memories and less time hooking up and setting up your trailer with Fastway RV products.. At Fastway, we focus on making sure our gear saves you time and effort and is strong and dependable.. The Equal-i-zer hitch gives you a safer ride by providing both sway control and weight distribution. This provides better steering, braking, and sway control, which help eliminate stressful driving situations and work to keep your family and your investment safe on the road.. Our products are built-to-last combining strength with revolutionary engineering. The result a faster and easier way to get each job done- no matter what the task.. Maximum gross towing weight 10,000 lbs. Pre-Installed Ball size 2-516. Sway control bracket positioning 27 - 32 back from center of coupler. Spring-bar dimensions 36 long x 1-38 wide. Shank length 12. Maximum trailer frame height 6 Maximum rise 7 from top of hitch receiver opening Maximum drop 3 from top of hitch receiver opening.

Unparalleled Sway Control that self-adjusts. 2-516 ball, universal frame brackets 3 inch, 4 inch, 5 inch 6 inch included no extras to buy. One pin removal from tow vehicle. Grease-free system ball and coupler move as one. Doubles as standard ball mount for towing without weight distribution.

Our Integrated 4 Point Sway Control provides the highest level of resistance to your trailer's attempts to sway. There is no other hitch on the market that offers as much sway control as the Equal-i-zer. The Equal-i-zer hitchs weight distributing design effectively transfers trailer tongue weight to all the axles and helps keep the front of the tow vehicle firmly on the road. The Equal-i-zer hitch gives you a safer ride by providing both sway control and weight distribution. This provides better steering, braking, and sway control, which help eliminate stressful driving situations and work to keep your family and your investment safe on the road. The Equal-i-zer hitch is engineered to work with virtually all bumper-pull trailers, including RV, horse, cargo, boat, and utility trailers, including trailers with surge brakes. Equal-i-zer shanks are available in a variety of sizes which provides a custom fit for virtually every receiver height .Sway control bracket positioning- 27 - 32 Inch back from center of coupler.