Top 10 Best Capri Ratchet

UNBREAKABLE - 10MM RATCHET WRENCH. REPLACEMENT FOR ANY SET. LIFETIME WARRANTY. CHROME VANADIUM STEEL. SLIM PROFILE - EASY TO ACCESS ANY TIGHT SPOT.

Let our 72-tooth fine gear flex-head ratchet help get the job done more easily. With just 5 degrees of space needed for each turn, it not only gets the job done faster but it's essential for working in narrow spots. True single-pawl gear design gives our ratchet an unparalleled smooth ratcheting mechanism and also allows us to construct a low profile ratchet for enhanced versatility. 180-degree flex-head makes it easy to navigate odd angles and tight corners. Low profile ratchet head lets you work in tight spots with low clearance. Anti-dust design seals out dusts and debris, protects the gear, and maintains internal lubrication for sustained high performance over time. Dual direction ratcheting gear. Switch between directions with just a flip of your thumb. Flawless chrome plating, achieved by thorough polishing and careful application of chrome protective plating, ensures durability and corrosion resistance. 38 in. drive, 11. 75 in. long.

Experience complete confidence tackling tough fasteners with our 72-tooth 6-point reversible ratcheting wrenches. Our 6-point box end with WaveDrive Plus design gives you a sure grip onto fasteners and high turning torque. WaveDrive Plus grips fasteners even when they are up to 90 rounded. 6-point WaveDrive Plus box end grips fasteners tightly, provides high turning torque while preventing rounding and damaging the bolt, and works on up to 90 rounded fasteners. Box end has 15-degree offset for knuckle clearance and working in tight spots. The open end is tipped at a 15-degree angle. Useful especially in tight spots, after each 15-degree turn, flip the wrench over to quickly engage the fastener again. Reversible single-pawl 72-tooth ratchet gear with just 5 degrees of swing arc, switchable with a simple thumb switch. Long pattern wrench length, up to 20 longer than standard, gives you more leverage and turning power. Premium SatinKrome finish, our most sophisticated finishing and protective coating process, enhances durability and gives the wrench an unparalleled look and feel. Size 12 mm open end and reversible ratcheting box end.

Designed to work perfectly with Capri Tools Interchangeable Torque Wrench and other compatible interchangeable torque wrenches. Heavy duty steel construction with premium matte finish. Dual direction, fine 72-tooth ratchet with 5-degree swing arc. 14 mm x 18 mm drive, compatible with interchangeable torque wrench with 14 mm x 18 mm drive cavity. 38 in. drive.

Set Includes SAE 14, 516, 38, 716, 12, 916, 58, 1116, 34, 1316, 78, 1516, 1 and Metric 8, 9, 10, 11, 12, 13, 14,15, 16, 17, 18, 19, 20, 21, 22,23, 24, 25mm. Open end angled 15 degrees for quick and easy flipping between rotations. 12 Point Box End is offset 15 for versatile fastener fitment. 72 tooth ratchet system with 5 arc swing for smooth ratcheting in tight spaces. Highly dependable pawl mechanism for slip and skip prevention.

A 38 drive ratchet in long 14 ratchet size format. Nano 38 head is 50 the size of the most popular 38 competition and the same size as most 14 drive ratchets. 12 long, quick-release socket retention, solid teardrop handle, 72-tooth, full chrome polish finish. A fraction the cost of building your own from replacement parts and with a complete design actually made to handle the abuse of the larger drive size. Exceeds ASME torque standards for 38 drive tools despite its miniature size.

Metric Spline wrenches can be used on metric 4, 6, 12 point, spline and Torx fasteners. The chrome-vanadium switch lever allows for easy changes in turning direction which helps improve speed. 15-Degree angled offset box end helps keep shank clear of obstructions. Chrome-vanadium box ends and switch levers provide high strength and durability. Box end is countersunk for easy application to the fastener.

The Flex-Head Angle Series Air Angle Impact Wrench features a 120-degree flexible head in an ultra-compact form factor 3.34 in deep and 2.55 in wide, perfect for tackling fasteners in hard-to-reach areas. 120-degree flexible head, tiltable up to 60 degrees forward and up to 60 degrees backward, combined with a 360-degree rotatable trigger lets you operate the tool in the best position possible. Ergonomic soft grip handle. One hand operation with large forwardreverse thumb dial. 400 ft. lbs. of maximum reverse torque and 333 ft. lbs. of forward torque, 2X more powerful than other air angle impact wrenches. Quiet operation at 91.2 dBA. Low air consumption at only 4 CFM at 90 PSI. Weighs only 2.94 lbs. Comes with 14 in. NPT air inlet.

Includes 2 Swivel Head Aluminum Ratchets and 3 Flat Head Aluminum Ratchets Meets 150 ANSI Made in Taiwan. Flat Head Ratchets 1 14-Inch Dr. x 6-Inch, 1 38-Inch Dr. x 12-Inch, and 1 12-Inch Dr. x 16-Inch. Swivel Head Ratchets 1 14-Inch Dr. x 6-12-Inch and 1 38-Inch Dr. x 10-Inch. Chrome vanadium steel construction with corrosion resistant satin finish and anodized aluminum handle. 90 Tooth reversible ratcheting mechanism produces a minimal sweep of 4-degrees Perfect for use in confined, hard to reach areas in cramped engine compartments and other tight spaces.

PROFESSIONAL-GRADE TOOL SATA 14-inch drive 120 position ratchet is perfect for tightening or loosening fasteners on vehicles and other machinery. INCREASED PRODUCTIVITY 120 positions and a 3 ratcheting arc allow you to turn fasteners in tight confines for maximum productivity. EASY OPERATION Double-stacked pawls engage a 60-tooth gear, providing exceptional strength and faster operation. RESISTS DIRT Enclosed head design resists dirt infiltration for continuous performance. HASSLE-FREE DESIGN Teardrop, low-profile head offers better access, while the flush-mounted onoff switch lets you change directions effortlessly.

Super-thin ultra low profile wrenches let you reach fasteners in tight clearance. Just 2. 2 to 5. 6 mm thin and constructed of premium forged steel, these super-thin open end wrenches are truly versatile and are made to last. The wrench head is tipped at a 15-degree angle. Useful especially in narrow spots, after each 15-degree turn, flip the wrench over to quickly engage the fastener again. Premium Chrome Vanadium steel forged with a complete 10-step state of the art heat treatment process, constructed for serious professionals. Flawless chrome plating, achieved through thorough polishing and careful application of chrome protective plating, ensures durability and corrosion resistance. Comes in our own spill-resistant Mechanics Tray for easy organization and storage. Tray dimensions 15-34 in. L x 7-12 in. W x 1-14 in. H, fits comfortably in most tool chests and cabinets. Set of 14 open end wrenches with 20 metric and 8 SAE sizes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm, 14, 516, 38, 716, 12, 916, 58 and 34 in. Thinness 2. 2 mm thin 6-7 mm and 14-516 in. open ends, 2. 6 mm thin 8-11 mm and 38-716 in. open ends, 3. 6 mm thin 12-15 mm and 12-916 in. open ends, 4. 6 mm thin 16-19 mm and 58-34 in. open ends, 5. 6 mm thin 20-24 mm open ends.