Top 10 Best Clamp Vise

HOME VISE Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch. EASY TO INSTALL This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove. PROTECT TABLE TOP During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end. WIDE RANGE OF USES This vise can hold a variety of partsO-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work. TIPS Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..

The Table Vise will not deform even under high pressure, the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel.. Jaws are 3 x 34 79mm x 17mm with a 2 51mm opening, the clip has a wide enough opening for any workbench or table.. Adjustable and rotates to any possible angle, rubber Jaws for no scratch and firm clamping, enabling you to lock the workpiece in any position.. Rubber on the jaws can be removed to reveal a cross pattern for use on wirerods, The overall design of pliers has laid a good foundation for the smooth completion of your work.. Lightweight, small vise, easy operation, Ideal for holding small parts in Jewelry, Hobby, Model making, Electronics and more..

DataNet weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch. Wide range of applications V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for light applications. Round, square and other shaped part can be processed. Flexible use Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise body. The vise body can be rotated 360 on its base, even if you are used to the left hand, there will be no hindrance. It is very convenient to disassemble and install. Durable The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable. Non-slip design The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip it lays a good foundation for your smooth completion..

PORTABLE VISE The Yost Vises COV-3 3-inch Clamp-On Vise is made from 30,000 PSI Gray Iron Castings. It has a plated steel screw and handle and steel double guide rods. Capable of clamping up to 38 inch depth pipes.. TECHNICAL SPECS Jaw Width 3 7.62 cm, Jaw Opening 2.5 6.35 cm, Throat Depth 1.625 4.1275 cm.. HOW TO USE Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.. YOST VISES QUALITY Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.. SAFETY INFORMATION Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.. WARRANTY Comes with a 1-year limited warranty and 90-day return..

Data Vise weight 2 lb, the maximum of jaw 2 inch, Jaw width 3 inch, the maximum of clamp workbench 2.17 inch,DrillGrinder Holder Range 0.97-1.97.. Widely used Aluminum vise clamps can be tilted and rotated 360, and do not need to be punched to install on the edge of a 2.17-inch thick table. It is an ideal choice for some industries, such as jewelry lovers, craftsmen, model making , Electronic products and others.. Anti-skid design the anti-skid texture on the inside of the jaws increases the clamping force of the jaws without sliding Rubber covers will protect your product from injury,The overall design of pliers has laid a good foundation for the smooth completion of your work.. 2 in 1Switching between the two modes is simple and comes with the tools you need, which is very helpful for your work.. The best serviceIf you are not satisfied with the products, you can contact us at any time, we will give you a satisfactory solution..

Material Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.. Structures Designed with thickened swivel pad, which can effectively prevent scratches and ensure solid clamping that helps clamp a variety of shapes without deformation.. Feature A easy turn-screw adjusts the size and pressure to give you a strong clamp while you work.. Advantage The additional adjustable screw attached to the handle provides the ideal clamping pressure, making your work more easily.. Application Fit for home, workshop, and professional use, providing clamping for light applications, such as woodworking, welding jobs, pocket-screw joinery, cabinetry, repairing and so on..

One-Click PositionSimply Press on the quick release button, and push the jaws together to quickly and precisely clamp. No need to turn the screws to posite.

HOME VISE Is the perfect tool for your home workshop. Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises.. TECHNICAL SPECS Jaw Width 5 12.7CM x Jaw Opening 5 12.7CM x Throat Depth 4 10.2CM x Pipe Capacity 0.125 D x 3.5D 0.32CM x 8.9CM.. SWIVEL BASE Vise head rotates 360 with respect to the vertical, locking at every 30 or 12 twelve different locking positions and equipped with a large 3.5 x 2.7 8.9CM X 6.9CM anvil work surface.. HOW TO USE Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item andor the vise. When finished working on the item, turn screw handle counterclockwise to release the item.. YOST VISES QUALITY Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.. SAFETY INFORMATION Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.. WARRANTY Comes with a 1-year limited warranty and 90-day return..

VERSATILITY Swivel base model rotates 45 left or right. STABILITY Double lockdowns ensure immobility. SMOOTH OPERATION Enclosed design keeps contaminants out and lubrication in. JAW OPENING 2-14. GROOVED AND REPLACEABLE TOP JAWS. Power source type acdc.