Top 10 Best Clock Parts Battery Operated

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.. Parameter I Shaft,drive long clock hands 10 mm to 450 mm Total shaft length is 18 mm 4564 inch, thread length is 5 mm 1364 inch,suitable for 1-3 mm 364 - 764 inch thickness clock panel.. DIY clock supplies the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.. Package contents 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions.. Warm notice when you install them, please keep the hour hand and minute hand parallel And please do not use too much pressure to avoid bending them..

Quantity package this battery clock replacement mechanism set comes with 5 quartz clock movements, 7 pairs of clock hands, 5 gaskets and 5 hang hooks, and the enough quantity to use and replace, provides a variety of styles to choose from, which can be applied for different styles of clock frames, clock replacement or making your own customized clock project. Size information the total length of the shaft is about 18 mm 0.7 inch, while the thread length measures approximately 11 mm 0.43 inch, which is suitable for clock panels with a thickness of 4 - 7 mm 0.16 - 0.28 inch, and the clock hands fit for a diameter of 25 - 35 cm clock surface, please check the size before installing with this clock accessories kit. Practical and durable the clock movement mechanism is powered by AA batteries not included, and the quartz DIY wall clock mobile mechanism has nice precision and is equipped with sweeping motion, which can provide the watchmaker with reliability and keep quiet when you are reading or sleeping. Reliable material these clock hands are made of quality aluminum, come in 4 vivid colors, and offer you a good opportunity for you to DIY your clock, lightweight and corrosion resistant, durable and practical so that they can be applied for a long time, providing you with a comfortable as well as quality usage experience and decorative effect. Extensive application these DIY quartz wall clock replacement movement parts are suitable for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and good for DIY quartz wall clock replacement movement parts In addition, it is suitable for repairing, replacing or making a clock.

DIY clock repair kit you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself. Size the total shaft length is approx. 20 mm 0.8 inches, and the thread length is approx. 13 mm 0.51 inches Jump second movement is suitable for 9-13 mm 0.35 - 0.51 inches thickness of clock panel. Accurate time keeping and quiet motor the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment. Wide application these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts. 5 Different styles of hands this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.

Package includes This battery clock replacement mechanism set comes with 3 pieces Arabic numerals are in gold, silver and black colors, each color each style has 1 piece 6 Pieces quartz clock movement mechanisms with 6 sets of clock hands with different styles and length, 6 gaskets and 6 hang hooks, enough quantity for daily use and replacement. Dimension details the single word of Arabic numerals is 0.79 inches in height, the total shaft length is approx 21.5 mm0.85 inches, and the thread length is approximately 15.5 mm 0.61 inches, which is suitable for clock panels with a thickness of 10-14 mm 0.39 - 0.55 inch, and the clock hand does not require the size of the clock surface. Easy to use you only need to use the glue, then you can easily make the clock panel, the whole applying process is simple and fast The installation of the hands is also very simple, and you just need to keep the hour hand and minute hand parallel, then place the hour and minute hands on the movement in turn. Practical and durable the quartz DIY wall clock mobile mechanism has nice precision and is equipped with sweeping motion, which can provide the watchmaker with reliability and keep quiet when you are reading or sleeping. Plenty of applications these DIY digital clock numbers are proper for hand-made wall clock, clock panel digital replacement, repair, and DIY personalized design, etc. And clock repair replacement parts are suitable for cross-stitch, DIY quartz wall clocks, craft clocks, frame-less wall clocks, providing you with nice use and decorative effect.

High Torque, Accurate Time Keeping Silent 2 Pieces CE RoHS Certified clock movements are included. Accurate and dependable when in motion, and the second hand spins without any ticking. Reducing Noise, provide a comfortable environment to sleep, work or study.. Broad Applicability and Styles 4 different style size clock hands are included. An appropriate style size set can fit for many clocks. All sets are good for replacement, repair and making of clocks. This clock movement parts are used in table clocks and wall clocks.. Easy to Assemble The total length of the shaft of this clock Movement is 710in 17.5mm, with a thread length of 25in 10.5mm that allows a clock face up to 310in 7.5 mm thick. It can be used in a clock dial diameter from 4-13in to 9-67in by different clock hands set.. Shockproof Box Package All items are placed firm in a custom foam insert to prevent scratching, bending, and other damage to enclosed items during shipping. Good ideal for a gift.. What You Get 2 non ticking clock mechanisms and 4 pack clock hands. Also included 2 wall nails, 2 metal hooks, 2 plastic washers, 2 brass washers, 2 brass nuts and 1 instruction sheet. StFlyBro worry-free 36-month warranty and Friendly Customer Service.. Kindly Note Please check the Size of Clock Dial Thickness and Diameter carefully..

CHOOSE the SUITABLE CLOCK MECHANISM Total shaft length is 58 in, thread length is 516 in, this kit fit clock dials up to 18 in thick , making you smile of the memories your old clock gives you. PACKAGED WITH CARE Comes as 2 clock movements, double insurance to repair your clock, with 4 pack hands packaged in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage. DECORATIVE CLOCK HANDS 4 pack clock hands sets for different options, fit for clock face from 512 in diameter you can pick out the style and length of the hands that look best with your clock at no additional charge. ACCURATE TIME-KEEPING QUIET MOTOR 2 clock movement, double insurance to make sure clock keep accurate time, work well and longer equipped with sweeping motion, no ticking powered by a AA battery. KEEP TIME IN STYLE With EMOON clock hands and motor kit, you too can be a clockmaker perfect for clock replacement, repairing all kinds of clocks, or making your own customized clock project.

DIY clock repair kit you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself. Size the total shaft length is approx.16 mm 0.63 inches, and the thread length is approx. 9 mm 0.35 inches Jump second movement is suitable for 5 - 9 mm 0.2 - 0.35 inches thickness of clock panel. Accurate time keeping and quiet motor the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment. Wide application these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts. 5 Different styles of hands this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.

Nice DIY clock repair set you will get 6 pieces of high torque long shaft clock movements and 6 different pairs of hands, along with 6 pieces hooks and 6 pieces pasters, these replacement parts suit well to different styles of clock frame, which are good for repairing, replacing or making a clock by yourself There are more functions waiting you to find out. Size details the total shaft length is approx. 13 mm 0.51 inches, and the thread length is approx. 5 mm 0.19 inches Sweeping movement is suitable for 3 mm 0.12 inches thickness of clock panel Suitable size is for your easy use and storage. Accurate time keeping and quiet motor the long shaft clock mechanism will give you great accuracy and dependability, along with sweeping motion, without ticking noise and will provide you with a quiet environment, you can use it with confidence and convenience. Various usages these clock repair replacement tools work well for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and can be applied as DIY quartz wall clock replacement movement parts. 6 Different styles of hands you will have 6 pairs of clock hands in different styles and length for your options, you can choose and match them according to actual demands, they are suitable for clock creations and repairs, also offer you a beautiful and decorative effect.

Warranty If the product has any problems with the clock mechanism, you can get a free replacement WITHOUT a return. Note The produces the 12888 series clock kits with different models, please compare the detail dimensions between your old one and this one before order.. Size Total shaft length is 18mm 0.71, thread length is 6.5mm 0.26and the shaft can drive long clock hands 10mm to 450mm. This clock movement cannot install the second hand. Usage This high torque clock parts kit is suitable for 1-4mm 0.04-0.16thickness clock dial.. What You Get The wall clock kit comes with metal hook and a small bag, which you can keep for other usage.Without clock hands.

Size About 5.6 x 5.6 x 1.5cm2.2 x 2.2 x 0.6inch. The total length of the shaft is 12mm, and the length of the yellow spiral is 5mm. Please Note Please measure the shaft of you clock mechanism you need before buying . Diameter The Minute Shaft Diameter is 3.6-3.7mm, and the Hour Shaft Diameter is 5.5mm. Screw Shaft Diameter 7.6mm.. For DIY quartz wall clock replacement movement part, applicable framless 3D Wall clock. The error is less than -1.5 secondsday, and the power consumption is less than 200 microamps.. Powered by 1 AA batteryNot Included, You can use No.5 AA batteries, carbon batteries, alkaline batteries. Cannot Use Rechargeable Batteries.. IMPORTANT This model is a 5mm ordinary shaft, which is suitable for clock panel thickness of not more than 4mm, otherwise the front nut cannot be tightened and the clock cannot run Due to different measuring tools and measuring methods, the measured length may be slightly different from the actual one. Thank you for your understanding.