Top 10 Best Cpu Fan Hub

Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.. Widely Compatible The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.. Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.. Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean tidy.. Package contents 1 black 15.7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug..

Thermalright is a Taiwanese brand with more than 20 years of development. It has a certain popularity in domestic and foreign markets and has a decisive influence in the player market. R D product lines include CPU air-cooled radiator, chassis cooling fan, thermal conductive silicone pad, thermal conductive silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.. Built in strong double-sided sticker, fixed on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load.. Small body, large capacity. Multi line control to keep cables in order.. This fan hub supports the installation of 10 groups of fans, making it easy to manage wiring. Strong paste installation mode, convenient SATA power line direct transmission, and safety is guaranteed.. Support fan speed reading. due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized.. Stable OutputFan hub synchronizer is SATA power direct output, in the state of high load, can maintain stable output, compact size, top surface with Thermalrigh engraved logo, overall colour, stable functionNote SATA cable needs to be purchased separately, this product is not configured.

This is ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB 5V 3pin plugs and PWM 12V 4pin plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans speed and color.. This CPU Cooling SATA Hub is powered by SATA 15PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load.. The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. Only compatible with 3pin 5V addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out.. The black hub is perfectly integrated with chassis. Mini and compact, which effectively saves your space, makes cable management easier, and the inside of the chassis is tidy. The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, and not easy to drop.. The PWM ARGB hub is equipped with two connecting cables. Both length of the wires is 53 cm. The red port on the hub is a professional port for the CPU fan. Gold-plated pins, solid materials, strong and durable..

Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.. In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface with speed detection function. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.. For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.. There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the source fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50, you will have 10 fans at 50..

CABLE MANAGEMENT Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing. SYNCHRONOUS FAN CONTROL Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system. EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. EXTERNAL POWER SUPPLY The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. TECHNICAL DETAILS Output 10 x 4-pin PWM Socket, Output Current up to 1 A per Port, Input SATA Power 4-pin Fan Header, Input Current up to 4.5 A, Dimensions 55.6 x 86.3 x 14.3 mm, Weight 50 g.

The 1 to 5 pwm fan splitter can supply power to 5 fans.. Come with double-sided tape, easy to install. Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean.. Compatible with all 4 pin and 3 pin case fans.. Package included 2 pack 1 to 5 splitter 5 way fan power supply cable. We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please dont hesitate to contact us, we will serve you our best..

-MOST EFFICIENT SATA TO FAN ADAPTER IN 2020 Managing multiple fans from a single case input has become easier for you now. If your motherboard lacks fan interfaces, use this neat tidy way to add fans expand fan interfaces designed for 12 V 4-pin fan. This PWM hub SATA accurately controls fan speed, you can slow down speed up the fans up to the maximum speed. You need to connect the SATA the 4 pin at the same time to run multiple fans.. -PWM FAN CONTROLLER TEMPERATURE CONTROL The CPU Port red port, would be the only port that can be controlled by the operating system. The other 9 black fan ports CAN NOT be adjusted in speed and will copy the power level of what the red port is at. Please note 4 Pin fan speed can be adjusted by temperature control as well. 3 Pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting.. -INSTALLATION CONFIGURATION Simple installation easy configuration, this fan splitter will work even if only connected to the PSU with SATA connector. You just plug the board into the CPU fan motherboard connection then SATA for power. It has EVA double-sided adhesive tape at the back of the hub to mount to the case or any flat place. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. -STEP BY STEP SET-UP You will receive 1 hub 1 PWM connector in your package. The PWM interface is connected to CPU fan interface on motherboard by PWM cable the red interface is dedicated for CPU fan. Connect 1 fan to the red port on fan hub then connect remaining fans. You then need to connect the fan hubs PWM cable to the motherboard. Connect the power supply SATA cable to fan hub before you attachstick it on the chassis.. -MONEY BACK PRODUCT WARRANTY Our product is backed up by manufacturers warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100 refund. We will go an extra mile to redress the situation at hand..

With Double Self AdhesiveYou can use to Secure it Inside your Case, and Once done you can Plug in all your CPUPC Fans and Manage your Cables. This Allows the Motherboard to Control all the Fans and Regulate their Speed.. Widely CompatibleThe Cable is One 4-Pin Female Connector to 4-Pin Male Connector, Support 4-Pin and 3-Pin Fans Cable, The 1 to 5 Splitter 5 way Fan Power Extension Cable Compatible with 4-Pin and 3-Pin PC Case Motherboard Fans.. Extension Fan CableMost of PC with Only One Case Fan Connection, It's Not Enough to Build 2 or More Fans in Your Computer. Enter this 4Pin PWM Splitter 5 Ports is Simple and Works Well with 4 Case Fan Headers and One CPU Header.. Easy to Plug Installationsthe Extension Cable Offers Greater Flexibility Between Motherboard and CPU Cooling Fans.Black Sleeved Nylon Braided Cable, More Durable and Make the Internal of PC Case looks more Clean Tidy.. With Double Self AdhesiveYou can use to Secure it Inside your Case, and Once done you can Plug in all your CPUPC Fans and Manage your Cables. This Allows the Motherboard to Control all the Fans and Regulate their Speed..

MOST EFFICIENT SATA TO FAN ADAPTER IN 2019 Managing multiple fans from a single case input has become easier for you now. If your motherboard lacks fan interfaces, use this neat tidy way to add fans expand fan interfaces designed for 12 V 4-pin fan. This PWM hub SATA accurately controls fan speed, you can slow down speed up the fans up to the maximum speed. You need to connect the SATA the 4 pin at the same time to run multiple fans.. PWM FAN CONTROLLER TEMPERATURE CONTROL The CPU Port red port, would be the only port that can be controlled by the operating system. The other 9 black fan ports CAN NOT be adjusted in speed and will copy the power level of what the red port is at. Please note 4 Pin fan speed can be adjusted by temperature control as well. 3 Pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting.. INSTALLATION CONFIGURATION Simple installation easy configuration, this fan splitter will work even if only connected to the PSU with SATA connector. You just plug the board into the CPU fan motherboard connection then SATA for power. It has EVA double-sided adhesive tape at the back of the hub to mount to the case or any flat place. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. STEP BY STEP SET-UP You will receive 1 hub 1 PWM connector in your package. The PWM interface is connected to CPU fan interface on motherboard by PWM cable the red interface is dedicated for CPU fan. Connect 1 fan to the red port on fan hub then connect remaining fans. You then need to connect the fan hubs PWM cable to the motherboard. Connect the power supply SATA cable to fan hub before you attachstick it on the chassis.. MONEY BACK PRODUCT WARRANTY Our product is backed up by manufacturers warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100 refund. We will go an extra mile to redress the situation at hand..

This cable is compatible with all 4 pin and 3 pin case fans Sleeved in Black Braiding With a 4 Pin Female Connector at One End and Splits to 4 Male Connectors at The Other End 1 of them is 4pin ,3 of them is 3pin . The Fan Splitter Connects 4 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector. The Fan Splitter Cable Provide Additional Fan to increase Airflow in Your Computer Case. The length of the product Approx 12 inches, Color Black Genuine new copper cores, no recycled materials -- 4 pin extension cable - ASIN B085MJPFVC.