Top 10 Best Desoldering Wicks

Quicker wicking This Solder wick can be used to remove the unwanted excess solder quickly and efficiently during the solder re-working process or remove some already soldered components. The added Flux gives a faster action and helps the surfaces to be heated and solder to flow, which significantly reduces the solder repair time.. Copper braids The braid desoldering wicks are made of 100 copper wires with fine braids woven together, and have good thermal conductivity. Also using the solder braid will protect the delicate components or electronic circuit boards from damages during solderingreworkingrepairing.. Wick Application The desoldering braid wicks are suitable for industry welding, lab work or home work, practical desoldering tools to clean a joint from excess solder and correct mistakes on small PCB boards, the desoldered components can be used again, bringing lots of convenience for your work.. Easy to use Simply just place the soldering wick against the solder and place heated solder iron tip on it, the soldering wick absorbs the solder due to its high thermal conductivity. By this way, you can remove the solder from the PCB or any metal surface. Leaves slight flux residue that is non-conductive and non-corrosive so it requires no cleaning.. Packages include 2 pcs of no-clean solder wicks, each wick is 5 ft in length and 0.1 inch in width..

Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. 100 copper wick has fine braid design to promote strong capillary action to pull in excess solder. Available with standard or anti-static bobbins.

1.High-quality materials The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.. 2.Geometric braid design The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.. 3.Widely used No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.. 4.Easy to use Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.. 5.Ingenuity quality 1 piece of no-clean solder braided wicks 0.078 inch wide, 9.84 ft length, which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time..

Oxide-free clean copper. Static free bobbins. Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F ANSIJ-STD-0004. Manufactured under SPC guidelines. Designed to leave a residue that is environmentally safe.

Quality materialsThe Braided Desoldering Wicks are made of 100 copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.. Easy to use the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.. Extensive applications the braided solder wicks are suitable for labs, school, home, and industrial welding work And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.. Low residue design No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.. Warranty If you have any questions, please feel free to contact us at any time. Thank you.

Quality materialsThe Braided Desoldering Wicks are made of 100 copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.. Easy to use the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.. Extensive applications the braided solder wicks are suitable for labs, school, home, and industrial welding work And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.. Low residue design No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.. Warranty If you have any questions, please feel free to contact us at any time. Thank you.

EXCELLENT QUALITY Our No-clean Desoldering Wick Wire is made of Ultra-thin 100 pure braided copper. Free impurity and oxide-free desoldering wick that contains 2 RMA Rosin Midly Activated flux.. ENOUGHT QUANTITY The package includes high quality desoldering wick wire 10 ft3M long x 2.5 mm width, Twice as more as standard solder wicks. Its fine geometrical design makes the molten solder wicks away quickly and efficiently. Enough for your daily work needs.. LOW RESIDUE No-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, RoHs compliant. No need to clean surface after desoldering process.. GREAT PROPERTIES Design with strong capillary action resulting in increased absorption of solder excess. Less heat neccesary by its excellent thermal conductivity. Job done faster and efficiently without damaging circuit board sensitive pads, welding points or SMD components.. SCOPE OF APPLICATION For all kind of electronic circuit boards, replace faulty components, Clean joints and pads, remove excess solder, correct solder bridges, Clean excess solder from PCB during solder, desolder, rework or reflow process..

Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid. Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily. The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free. Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up. The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze.

Oxide-free clean copper. Static free bobbins. Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F ANSIJ-STD-0004. Manufactured under SPC guidelines. Designed to leave a residue that is environmentally safe.

Oxide-free clean copper. Static free bobbins. Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F ANSIJ-STD-0004. Manufactured under SPC guidelines. Designed to leave a residue that is environmentally safe.