Top 10 Best Dockem Koala Tablet Wall Mount

Installs easily into drywall with included screws and anchors a hammer and Philips head screwdriver are the only required tools for most scenarios drill andor alternative screws may be needed for studs or walls other than drywall. Universal Design provides compatibility with all devices up to 11mm thick. Built-in cord clips make for an easy charging station. Perfect in the kitchen, gym, bedroom or anywhere you need. Super easy docking and undocking, can be set up in portrait or landscape. No extra accessories required no special cases or attachments onto your tablet. Built-in cord clips and, on larger model iPads, full access to every button and port while mounted smaller devices may have covered ports in landscape mode. Apple Smart Covers tuck neatly behind without the need to remove them also compatible with some slimmer tablet case combinations any devicecase combo less than 11mm thick in total.

DAMAGE-FREE SETUP REMOVAL Installs in less than 2 minutes using damage-free 3M Command Adhesive Strips included that are rated to hold up to 5lbs 2.25 kg each no screws or holes required intended for use on smooth, flat surfaces Screw-in versions sold separately Koala Mount Koala Mount 2.0.. UNIVERSAL Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. This includes the iPad 1, 2, 3, 4, New iPad 9.7, Pro, Air, Air 2, Most Samsung Tablets, and many more. The brackets will fit any device 11mm thick or less. Can be used with protective cases left on if total thickness is under 11 mm.. NOTE ON COMPATIBILITY While it does fit most popular tablets, the bracket supports can block portsbuttons on either side between 1.5 - 3.75 inches up from the bottom 7-8 tablets, like the iPad Mini may have blocked ports in landscape mode - see our Koala Mount 2.0 if this may be an issue.. SIMPLE Super easy docking and undocking, can be set up in portrait or landscape mode. No extra accessories required no special cases or attachments onto your tablet. Full access to portsbuttons on larger devices 7-8 devices may be better with our Koala Mount 2.0. Built-in cord clips to help keep track of your cord.. MOUNTING These come with Regular 3M Command strips that are not designed to work in areas exposed to high heats or moisture like the bathroom. 3M makes special water and heat resistant strips for this. Also, all Command Strips don't tend to work well on textured surfaces and some wallpapers. We strongly recommend performing our Strength Test. Command Strips are not reusable once they've been removed..

2 SETUP OPTIONS WITH INCLUDED PARTS Incredibly simple, damage-free setup with 3M Command Adhesive strips rated to hold up to 5 lbs each, or setup with included screws and anchors for scenarios where a more heavy duty setup is required.. WIDE RANGE OF COMPATIBILITY Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. The brackets will fit any device 13mm thick or less, although some thicker devicescases may also fit if they have tapered edges. In many cases, can be used with protective cases left on if total thickness is under 13mm.. ACCESSIBLE PORTS The Koala Mount 2.0 was specifically designed to leave as much space open as possible on the sides and bottom of the device so that most ports will still be accessible, depending on your device. For example, even with an iPhone 6 mounted in portrait mode, the headphone jack is still accessible.. BUILT-IN CORD CLIPS There are 2 different styles of cord clips integrated into each bracket. The side clip is a temporary clip that is super easy to use and is meant for holding your cord while the mount is not in use. The bottom clip is a semi-permanent clip designed to hold your cord at all times.. MAKE IT PERMANENT If you are looking for a secure, permanent mount from which a device cannot be removed, you can use 2 sets of Koala Mount 2.0 brackets to lock in a device by attaching the 2nd set of brackets with Command strips..

WIDE RANGE OF COMPATIBILITY Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. The brackets will fit any device with a thickness between 14 mm and 22 mm or 916 and just short of 78. Some thicker devicescases may also fit if they have tapered edges. Many devices can be used with protective cases left on if total thickness is under 22mm. 2 SETUP OPTIONS WITH INCLUDED PARTS Incredibly simple, damage-free setup with 3M Command Adhesive strips rated to hold up to 5 lbs each. Alternatively, setup with included screws and anchors for scenarios where a more heavy duty setup is required. ACCESSIBLE PORTS The Koala Mount 2XL was specifically designed to leave as much space open as possible on the sides and bottom of the device so that ports will still be as accessible as possible on a wide range of devices, however, please check the dimensions in the photos and compare to your specific device to determine suitability. BUILT-IN CORD CLIPS There are 2 different styles of cord clip integrated into each bracket. The side clip is a temporary clip that is super easy to use and is meant for holding your cord while the mount is not in use. The bottom clip is a semi-permanent clip designed to hold your cord at all times. PERFECT FOR BEDSIDE AND HEADBOARD The Koala Mount 2XL is perfect for using to charge your phone safely in the bedroom without taking up valuable nightstand space. Attach it to the side of a nightstand, directly to the headboard, or to the wall, for a convenient charging spot, clock, and alarm..

2 SETUP OPTIONS WITH INCLUDED PARTS Incredibly simple, damage-free setup with 3M Command Adhesive strips rated to hold up to 5 lbs each, or setup with included screws and anchors for scenarios where a more heavy duty setup is required.. WIDE RANGE OF COMPATIBILITY Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. The brackets will fit any smartphone 13mm thick or less. In many cases, can be used with protective cases left on if total thickness is under 13mm.. ACCESSIBLE PORTS The Koala Mount 2.0 was specifically designed to leave as much space open as possible on the sides and bottom of the device so that most ports will still be accessible, depending on your device. For example, even with an iPhone 6 mounted in portrait mode, the headphone jack is still accessible.. BUILT-IN CORD CLIPS There are 2 different styles of cord clip integrated into each bracket. The side clip is a temporary clip that is super easy take use and is meant for holding your cord while the mount is not in use. The bottom clip is a semi-permanent clip designed to hold your cord at all times.. PERFECT FOR BEDSIDE AND HEADBOARD The Koala Mount 2.0 is perfect for using to charge your phone safely in the bedroom without taking up valuable nightstand space. Attach it to the side of a nightstand, directly to the headboard, or to the wall, for a convenient chargins spot, clock, and alarm..

Universal Design provides compatibility with all devices up to 11mm thick. Built-in cord clips make for an easy charging station. Perfect for reading recipes in the kitchen, watching workout videos in the gym, or relaxing in your bedroom. No Screws or Holes Required, so no damage to your wall Command strips stretch off when it comes time to remove the mount. You set the brackets up at the appropriate distance for your device and your tablet simply rests securely in the pocket can not be adjusted for different tablets once set up without replacing the Command strips. Easy in and out with one hand. Devices can be charged while mounted charging cord not included. Built-in cord clip at the bottom of each bracket. Can be set up for portrait or landscape mode. NOTE Please be aware that the charging port, headphone jack, or buttons may be blocked by the side of the brackets when mounted in landscape mode for the Fire HD 8 Fire HD 10. See Fire HD 10 example in the photos.

CONVENIENT Design - you can decide the location and fixed the dimension per your devices and meets for your location requirement, place your tablets or smartphone in the most convenient location your want, on the wall or door in the kitchen, bathroom, gym or any smooth surface. Firmly WALL HOLDER - includes 2 separate brackets that you can adjust the distance per your device, compatible with all devices up to 0.47 Inches 12mm thick.. UNIVERSAL - it fits for most of tables such as Apple Tablet iPad Air 4,3 Mini Ipad Pro 8,ipad 7 , Samsung Galaxy TabNote, Nexus 710, eReader, Microsoft Surface, , and it also could be the wall mount holder for the smartphone, remote TV controller.. INSTALLATION with ADHESIVE - With 3M self-adhesive tape included and can be installed on almost all vertical surfaces, on walls, desks, shelves, cabinets, glass surfaces etc. No screws are needed, it won't damage the wall.. INSTALLATION with SCREW - It can also be installed by screws included, stronger and more stable..

SCRATCH-FREE SILICONE Protect your iPad from scratches and bumps by mounting it to a wall. Your iPad is held between two pieces of scratch-free silicone, making it easy to insert and remove at all times.. EASY TO INSTALL All necessary screws and plastic anchors are included with each purchase. Mount your iPad easily on the wall - without the bulk - and manage the charging cable with an elago cable management button.. GOOD ACCESS TO APPLE HOME APP Perfect for a Home Automation Setup The elago Home Hub Mount was designed to mount your iPad to any wall to gain instant and convenient access to your Apple Home app.. SECURE THE TABLET ANYWHERE Fits on any wall in the kitchen, bathroom, bedroom, reading room, etc. Secure your iPad anywhere you want and enjoy a cozy life at home.. WARRANTY Purchase with confidence 30-days 100 Money Back Guarantee 1-year replacement warranty..

DAMAGE-FREE SETUP REMOVAL Installs in less than 2 minutes using damage-free 3M Command Adhesive Strips included that are rated to hold up to 5lbs 2.25 kg each no screws or holes required intended for use on smooth, flat surfaces Screw-in versions sold separately Koala Mount Screw-in, Koala Mount 2.0 Koala Mount 2XL. UNIVERSAL The brackets will fit any device 11mm approx 716 thick or less. Can be used with protective cases left on if total thickness is under 11mm. Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. This includes most iPhone models, Samsung phones, and many more.. NOTE ON COMPATIBILITY While it does fit most popular phones anything under 11mm thick, the bracket supports can block portsbuttons on either side between 1.5 - 3.75 inches up from the bottom some may have blocked ports if mounting in landscape mode - see our Koala Mount 2.0 or Koala Mount 2XL if this may be an issue.. SIMPLE Super easy docking and undocking, can be set up in portrait or landscape mode. No extra accessories required no special cases or attachments onto your tablet. Built-in cord clips under each bracket to help keep track of your cord.. MOUNTING These come with Regular 3M Command strips that are not designed to work in areas exposed to high heats or moisture like the bathroom. 3M makes special water and heat resistant strips for this. Also, all Command Strips don't tend to work well on textured surfaces and some wallpapers. We strongly recommend performing our Strength Test. Command Strips are not reusable once they've been removed..