Top 10 Best Electrical Tester Fluke

Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected. Continuous self-test so you always know its working. Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC. AudibleSilent mode for added convenience.

Automatically measures volts ac and volts dc with precise digital resolution. Displays resistance to 1000. Easy and accurate OpenJaw current measurement. Optional holster attaches to a belt and neatly stows test leads. Can stay connected much longer than solenoid type tester.

SafetyMeasure ac voltage, current, frequency without touching a live wire. Faster answersTroubleshoot with all power supply measurements at-a-glance. More informationSee ac voltage and current values at the same time. Works where you need itFork fits over wires up to AWG 40 120 mm2 with a 17.8 mm 0.7 inch jaw opening. Accurate on complex signalsTrue-rms measurements improve accuracy on non-linear loads. Additional testsResistance to 100 k, frequency from 45 Hz to 66 Hz. T6-1000 Pro Exclusive Visible answers in dark work spacesVisual Continuity lights the screen bright green when continuity is detected. T6-1000 Pro Exclusive Consistent ground connection through ground lead and alligator clip supplied. T6-1000 Pro Exclusive AccessoriesHeavy duty black alligator clip and convenient carrying holster included.

Repetitive or hard-to-reach testing is easy with the remote test probe. Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection. Read measurements easily with large, backlit display. Save both time and money with automatic calculation of polarization index and dielectric absorption ratio. Make repetitive tests simple and easy with the 1507's Compare PassFail function. Repetitive or hard-to-reach testing is easy with the remote test probe. Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection. Read measurements easily with large, backlit display.

PlDAR measurements with TrendIt graphs. Memory storage through Fluke Connect Measurements app. CAT III 1000 V CAT IV 600 V overvoltage rating for added user protection. Temperature Compensation through Fluke Connect Measurements app. Fluke i400 AC Current Clamp Use with your Fluke 1587 FC to measure 1A AC to 400 A AC. 1 mAAmp output guarantees easy reading.

Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure DC current. The true RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy 1.0 5 digits. Audible continuity sensor confirms that the circuit conducts electricity. Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.

Digital clamp-meter for 24V loop circuits measures DC to 100mA via clamp and to 24mA in circuit, and DC voltage to 30V. Meter can source and simulate DC signals from 4 to 20mA, can source DC voltage signals up to 10V, and is accurate to 0.2 with a resolution of 0.01mA. Clamp with 4.5mm 0.177 inches jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications. Built-in 24V loop power supply to power a transmitter and measure its milliamp output signal. Meets EN and IEC safety standards 61010-1 and 61010-2-032. Dual backlit display with both mA measurement and percent of 4 to 20 mA span. Measurement spotlight. Measure up to 99.9 mA range non-contact. Automatic power off. 4 to 20 mA scaled output.

The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps. The 117 multimeter features true RMS for accurate measurements on non-linear loads. The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage. The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals. The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.

PI polarity index DAR dielectric absorption ratio with Trend It graphs identifies problems faster. Memory storage through mobile Fluke Connect Measurements App eliminates writing down results, reduces errors and saves data for historical tracking over time. Temperature Compensation through App helps establish accurate baselines and relevant historical comparisons. VFD low pass filter for accurate motor drive measurements Includes auto discharge of capacitive voltage for added user protection. Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V.

High voltage digital megohmmeter has preset and adjustable test voltages for measuring insulation resistance, and also measures leakage current to 2 milliamperes mA and capacitance to 20 microfarads. Measures voltage to 600V and signals when a voltage greater than 30V is detected. Automatically calculates PI and DAR for a detailed indication of insulation condition. Performs timed tests up to 99 minutes, and stores up to 99 test results which can be uploaded to a PC. Meets EN safety standards 61010 to 1 and 61557, and is rated for CAT IV installations to 600V and CAT III installations to 1,000V.