Top 10 Best Ender 3 Pro Bed

ALL NEW FUNCTIONALITY Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.. EASY MODEL REMOVAL The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.. CUSTOMIZABLE The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. SIMPLE INSTALLATION Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.. UNIVERSAL Works with all FDM printer models, and all heated and non-heated 3D printer beds..

ATTENTION BEFORE USEFirstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.. ALL NEW FUNCTIONALITY Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.. EASY MODEL REMOVAL The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.. CUSTOMIZABLE The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. SIMPLE INSTALLATION UNIVERSAL Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds..

Compatibility Our glass bed is applicable for Creality 3D printer Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro and most of the Cartesian style 3D printer with a MK2 MK3 hot bed. Please confirm the size of your printer's platform firstly.. No Edge Curling The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be sticked on the build surface firmly without glue, avoiding the issue of prints edges curling. Equipped with 4 clips to fix the hot bed.. Super Convenient It is very easy to remove the prints. The surface of our tempered glass bed is a layer of microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.. Excellent Flatness Upgraded ender 3 build plate with smaller CREALITY logo provides flatter and smoother build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of mold during 3D printing.. High Grade Material Made of 100 Genuine Borosilicate Glass, thick and high quality. Glass bed's hardness is up to 8 Mohs and is capable to work up to 400 . Using alcohol or acetone to wipe it after repeated use..

Easy to Remove Model within 1 Minute The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.. High Viscosity and Strong Adhesion Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.. 0.15MM of Flatness Recovery Model This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.. Wear-Resistant and Scratch-Resistant, easy to clean There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.. High Hardness and Durable This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness..

No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.. No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.. Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.. Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.. Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..

Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Note Please remove the transparent protective film on the surface before use.. Compatible with PLAPETGPEEKABS and any other filaments.. No more tape, no more glue, no more shovel, and release your printing anxiety.. Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.. When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print..

Ender 3 Replacement Heater Bed DC 24V 220W with Cable Installed for Creality 3D Printer Ender 3Ender 3 Pro Ender 3X. Original 3D Printer Ender 3 Replacement Parts 3D Printer Accessories for Ender 3 Ender 3 Pro Ender 3X. Size of Ender 3 Hot Bed 235x235x3mm. Ender 3 Pro Hotbed with Cable Which be Installed Well. Build Surface with 3M Adhesive which easily to stick on the heater bed platform.. 3D Printer Ender 3 Replacement Heater Bed with Free Technical Support..

No Edge Curling Creality Ender 3 bed is coated with a composite material with a microporous structure. As the temperature rises, the micro-pores of the hot bed expand and adhesion increases, allowing the print to adhere firmly to the build surface, avoiding the problem of curling at the print edge. As an indispensable upgrade part of 3D printers, let it bring you a better printing experience.. Easy to Remove PrintsThe microporous composite coating on the surface of this Creality glass build plate shrinks as the hot bed cools, which greatly ensures that a complete small prints can be picked up by hand without any tools, and large prints can be easily removed using tools, saving at least 30 of the time you take off the prints.. Superior Flatness The improved 3D printer plate provides a flatter and smoother build surface than magnetic beds or PEI build plates, ensuring a high degree of flatness on the bottom of the prints. The CREALITY logo on the upgraded Ender 3 glass build plate is much smaller than the older version, and the bottom of the prints is no longer depressed during printing, resulting in a more perfect print.. Durable Easy to Clean The special coating of this Creality glass build plate is inorganic, it is made of 100 real borosilicate glass with a hardness of 8 Mohs, works at 400C, is thick and high quality and lasts longer than any other material of the build plate. Clean with water or soapy water after use.. CompatibilityThis 3D printer accessory can use for Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender 5, Ender 5 Pro and CR-20, CR-20 Pro and most Cartesian style 3D printers with MK2 MK3 hotbeds, please check the size of your printer platform first..

300C High-temp NozzleThe brand new nozzle made of brass can stand up to 300C printing temperature, and it is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.. Spring Steel PEI Magnetic Build PlateEnder-3 S1 Pro has used the spring steel PEI magnetic build plate, which has good adhesion to the printed model and enables fast heating up of the heat bed. The build plates is not only durable but also flexible. Once the printing completes, users can remove the printed mdel effortlessly with just a slight bend.. 4.3-Inch Touch Screen LED LightThe 4.3-inch touch screen, supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes. The equipped LED light enables comprehensive light fill, with which users can observe the printing details even in a dark environment.. Sprite Full-metal Dual-gear Direct ExtruderThe Sprite full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments, especially the flexible TPU.. CR Touch Automatic LevelingEquipped qith CR Touch, the 16-point automatic leveling can complete quickly with compensation for points' printing height on the heat bed. Good effeciency saves much time..