Top 10 Best Ender 3 Touchscreen Upgrade

Creality original display screen kit for Ender-3 V2,Ender-3 Pro,Ender -3 3D printer. 4.3-Inch HD color screen.. 24-bit color HD screen displays clear views in good contrast. Modular design, easy installation, the screen is tilted to make a wide vision and easy to operate, it can be fixed directly on the 3D printer base.. It provides sufficient storage space, and supports to store pictures in JPEG compression mode, further increasing the number of stored files..

3D Printer Intelligent Touch Screen Open UI design software supportsyou to control your 3d printer with a 4.3-inch full-color screen with a user-friendly interface and responsive touch control. It is a good upgrade for your original Ender-3, and Ender-3 Pro 3D printers.. Intelligent UI Create Customized Interface Create Customized InterfaceOpen UI design software , support self-defined UI interface, create exclusive and unique UI style by your inspiration,and enjoy interactive 3d printing experience.. Resume Printing Coming with a filament sensor, stop printing when the filament runs out. Continue printing after power is restored.. Print Hassle-free Creality 3D Pad Mini touch screen read Gcode files directly from either SD card or U disk. Hassle-free print without the tedious process of copying files with a card reader.. After-sale Service Life-time professional technical supports,If you have problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..

This Ender 3 touch screen is fully open source thanks to a partnership between First Layer with Insanity Automation. This screen comes from the factory flashed with our custom firmware for more features than ever. Now supports dual gear extruder, filament sensor, mesh bed leveling features, change filament function, screen brightness and standby timer, built in PID tuning, silent touch screen mode, direct drive extruders. This product is an Ender 3 display screen ONLY, no control board included.. A custom DWIN_SET makes this the first open source Ender series touch screen on the market to be compatible with any Ender 3 V2 Pro 5 on the market. Along with more added features than any other touch screen available today, this is THE best version of this product available on Amazon right now. With this new open source build, not only have critical bugs preventing users from even turning on their printers been fixed, but more printers than ever can use this touch screen. Compatible with Ender Series printers as direct swap for your older stock screen IF you have a 4.2.7 32-bit silent control board. This screen does with 4.2.2 boards however you will have to flash Crealitys firmware onto both the board and the screen. Crealitys firmware is not compatible with Ender 3 Max Ender 5 and Ender 5 Pro.. Realistically Creality should have updated their Ender Series screens years ago but havent. Their firmware catalogue is also outdated and basic, ours is not. We invite you to browse are extensive firmware catalogue on our google drive and view videos on YouTube regarding this screen and our firmware. This upgrade is the equivalent of upgrading your phone from a Nokia 3310 to an iPhone.. First Layer have partnered with Insanity Automation to hack this touch screen and unlock its full open source potential This kit is completely Plug-and-Play and enhance your Ender 3 with previously unavailable features, while also allowing for the BL Touch upgrade in the future if you want to install it. Please note this Touch screen is flashed with a custom DWIN_SET folder developed by Insanity Automation for First Layer. Stock Creality firmware for the 427 board WILL NOT work with this screen.

Please contact F1rst Layer DIRECTLY for all your technical support needs We are proud to announce the ultimate Ender series Plug And Play upgrade kit. Pairing a CR Touch, 4.2.7 Silent 32 Bit control board, Ender 3 V2 color display screen, filament runout sensor, and aluminum handle. All designed to work out of the box with F1RST LAYERS custom firmware flashed from the factory. F1rst Layer is an authorized distributor of all parts included in this kit. Update and download links in description. The CR Touch is an incredibly accurate and reliable auto mesh bed level sensor that probes individual spots for differences in Z height on any print surface with incredible accuracy to 0.005mm. This is especially great for users with small imperfections or warping in their print surface as manual leveling will never be able to account for these variables. Includes 1.5m extension cable for neat cable management solutions.. The V2 color display screen can now be used on Ender printers thanks to the new 4.2.7 control board. This screen is running the aftermarket Jyers UI with dozens of features over Creality firmware for the V2 screen which they havent updated since the day it was released. This means it is INCOMPATIBLE with Creality firmware unless you flash their firmware back onto the screen. New features include mesh bed leveling, extended UI settings to change text color, automatic filament loading and MORE. This is the newest version of Creality's 4.2.7 32Bit silent control board with TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32 Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others. It also comes with a bootloader pre-installed to for easy firmware updates. The 4.2.7 also comes built in support for all the parts in this kit for easy install.. Also included in this kit are a filament run-out sensor and a CR-6SE handle for more convenient moving and handling of your printer. The filament run-out sensor is installed in front of your extruder and ensures that the printer has not run out of filament. Should the roll of filament run out in the middle of a print, when then proper firmware is flashed, the filament sensor will detect it, and your printer can pause the print and wait for you to replace the filament and resume the print..

This Ender 3 touch screen is now FULLY open source thanks to a partnership between First Layer with Insanity Automation. The ONLY open source Ender touch screen on Amazon fully Plug-And-Play from the factory flashed with our custom firmware for more features than ever. NEWLY SUPPORTED dual gear extruder, filament sensor, mesh bed leveling features, change filament function, screen brightness and standby timer, built in PID tuning, silent touch screen mode, direct drive extruders and more. A custom DWIN_SET makes this the first open source Ender series touch screen on the market to be compatible with any Ender 3 V2 Pro 5 on the market. Along with more added features than any other touch screen available today, this is THE best version of this product available on Amazon right now. With this new open source build, not only have critical bugs preventing users from even turning on their printers been fixed, but more printers than ever can use this touch screen. This is the newest version of Creality's 4.2.7 32 Bit silent control board with authentic TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. The 4.2.7 control board comes flashed with our custom Marlin firmware for the Ender 3 Pro. This entire hardware swap will take less than 1 hour and quickly turns your stock Ender into a touch operated printer in just one upgrade as well as add dozens of features over stock Creality firmware. The upgraded silent fan included can be placed on the hotend or the control board however since the hotend fan is running at all times, it is suggested to be installed there. To avoid needing to re-route all the wires through the wire harness, you can cut the wires from the old fan and splice them onto the new silent fan for a pain free swap. First Layer have partnered with Insanity Automation to hack this touch screen and unlock its full open source potential This kit is completely Plug-and-Play and enhance your Ender 3 with previously unavailable features, while also allowing for the BL Touch upgrade in the future if you want to install it. Please note this Touch screen is flashed with a custom DWIN_SET folder developed by Insanity Automation for First Layer. Stock Creality firmware for the 427 board WILL NOT work with this screen.

Leveling ModeEnder 3 S1 touch screen has automatic leveling and auxiliary leveling. After automatic leveling, you can check whether the platform is flat or not through the 5 points of auxiliary leveling. If it is not flat, you can manually tighten or loosen the nut to make the platform flat, improve the printing success rate.. Easy InstallationJust remove the original screen, replace the screen cable of the motherboard, and then fix the screen directly on the original 3D printer screen base.. Firmware UpdateThe touch screen can be plug and play in Ender 3 S1 Pro. If you need to install it to Ender 3 S1 and Ender 3 S1 Plus, you need to update the firmware of the motherboard.. Screen SaverIf the screen is not operated for five minutes, the screen will automatically dim to save power consumption.. After Sales ServiceMore than 10 engineers provide lifetime technical assistance. Please kindly contact usseller via ask a question find us directly, cause our customer service will respond to you within 24 hours..

It is 100 Creality original Ender 3 V2 color screen kit.. Mass memoryIt provides sufficient storage space, and supports to store pictures in JPEG compression mode, further increasing the number of stored files.. User-friendly UI interfaceBrand-new screen allows easier operation via its simple UI interface.. Modular design Easy installationThe screen is tilted to make a wide vision and easy to operate. It can be fixed directly on the 3D printer base.. If you have any question about this screen kit, please free to contact us.

300High-temp NozzleUpgraded brass nozzle can stand up to 300printing temperature and it is compatible with multiple filaments such as PLA, ABS, PVA, Wood, TPU, PRTG and PA which providing more possibilities for creation.. Sprite Dual-Gear Direct Drive ExtruderCompatible with more filaments, Ender 3 S1 Pro 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 13.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.. 4.3 inch Touch ScreenThe 4.3-inch touch screen supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes.. LED Light for Clear ObservationThe equipped LED light enables comprehensive light fill, with which users can observe the printing details even in a dark environment.. Creality 3D StoreThere are more than 20 engineers for after-sales service and provide 247 customer service with 1-year limited and lifetime technical assistance. Please contact us via ask a questiondirectly to get the professional assistance..

Dual-Gear Direct Drive ExtruderThe upgraded dual-gear direct extruder features two chromesteel gears that are engaged at a 13.5 gear ratio. With a pushing force of up to 80N, the extrudeirealizes smooth feeding and discharging of filaments without slipping and works extremely well irprinting flexible filaments such as TPU. Compatible with more filaments, Ender 3 S1 Pro 3d printecan print PLA,ABS, PETG, Wood TPU PA etc.. 4.3 inch Touchscreen LED Light The 4.3-inch touchcreen, Supporting 9 lanquages, offers offcient Ul interaction and is easy to use lt will dim out automaticaly for energy-saving if there no action for 3 minutes. Designed with LED lights enables you to check the printing status at any time.. Removable PEl Spring Steel Print SheetThe innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PEl coating brings good adhesion and printed models can easily be removed by bending the print sheet.. Higher Printing Precision Easy to lnstall Adopting dual Z-axis, dual Z motor and dual bar wire linkage at the same time to avoid the printing deviation of single-axis printings, and increase the accuracy and stability of printing. 96 of the printer body is pre-installed, making the assembling extremely convenient with only 6 steps and the maintenance of the printer is simple and easy.. After Sales ServiceCreality pays great attention to the buyers user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..