Top 10 Best Factory Radio Add A Amp Amplifier Sub Interface

Speaker to RCA Converter - Converts car stereo output speaker wire to RCA connectors. This speaker wire line out converter is compatible with high power car stereos up to 90 watts per channel. Delivering premium performance without noise, static, or buzzing. Easy Installation - Add an amplifier to nearly any stock stereo with this line out converter. Simply tap into the car audio speaker wire with snap adapters. No need to remove the car stereo. Each converter includes easy to follow instructions to simplify the installation process. Subwoofer - This DIY speaker kit is a convenient speaker wire to subwoofer adapter. The RCA line output converter for subwoofer makes it easy to hook up to an amplifier and set up a subwoofer system in any car. RCA Converter - Speaker level to line level converter allows the addition of 2-channel or mono amplifiers. Independent left and right channel level adjustments provide the perfect sound balance. Includes signal sensing 12V remote turn-on output. External Controller - Includes mountable remote control knob for adjusting subwoofer bass audio level from the dash. This remote bass knob lets you control the level of sound with convenience. No reason to pull over and manually adjust the amplifier. Buy with Confidence - Backed by Scosches Lifetime Tech Support and Limited Lifetime Warranty.

This wire harness provides a connection for one set of RCA cables as well as an add-a-circuit with remote wire for the remote amplifier turn on wire.. This wire, along with a set of RCA cables, is run to your aftermarket amplifier. All thats left for you to do is connect the main power wire from your battery Not included and ground.. Converter adjustment instructions 1, After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise. 2, Turn the stereo system on and adjust the main volume control on the stereo to approximately 34 maximum volume. 3, Select one of the adjustment pots and turn it slowly clockwise until you notice the sound and then stop. 4, Turn the remaining pot to the same position as the previously adjusted pot.. Used to add an amp or sub to your factory system. One complete piece, no need to tape wires together. Comes with an inline converter. Fully adjustable gain control. Plug and play feature. Easy to install. Audio volume to the amplifier can be adjusted by the dials on the harness. For easier access we recommend using an external volume knob. It is up to the installer to select which circuit to use with the Add-A-Circuit.. Package Included 1 x wire harness, 1 x Add-A-Circuit fuse tap, 1x 3 amp fuse show as the picture, Installation Instruction Not Included. Compatible for Ford 2011-2018 Factory Radio.

Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides one pair rca output and a power wire for the remote amplifier turn on connection. Adjustable gain output.. VERY IMPORTANT----PLEASE READ BEFORE PURCHASE---- Not compatible with factory amplified stereo systems like JBL, Bose, etc. Only works with factory non-amplified systems no JBLSynthesis, Bose, etc.. No factory external amp systems. Connection is done at back of radio.. Compatible Vehicles No factory premium amp systems like JBL, etc No factory external amp systems- 2020 4 Runner, 2019-2020 Avalon, 2018-2020 Camry, 2019-2020 C-HR, 2020 Corolla, 2020 Highlander, 2020 Prius, 2019-2020 Rav4, 2020 Sequoia, 2018-2020 Sienna, 2020 Tacoma, 2020 Tundra.

Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides one pair rca output and a power wire for the remote amplifier turn on connection. Adjustable gain output.. VERY IMPORTANT----PLEASE READ BEFORE PURCHASE---- Not compatible with factory amplified stereo systems like JBL, Bose, etc. Only works with factory non-amplified systems no JBLSynthesis, Bose, etc.. Connection is done at back of radio.. Adapter made for Scion 2013 - 2016 FR-S, 2012 - 2015 iQ, 2005 - 2016 tC, 2004 - 2006 xA, 2004 - 2015 xB, 2008 - 2014 xD. Adapter made for Toyota 1988 - 2017 4-Runner, 1987 - 2017 Camry, 1999 - 2009 Camry Solara, 1986 - 2006 Celica, 1987 - 2019 Corolla, 1987 - 1992 Cressida, 2000 - 2006 Echo, 2007 - 2014 FJ Cruiser, 2001 - 2016 Highlander, 1987 - 2002 Land Cruiser, 2005 - 2010 Matrix, 1987 - 1995 MR2, 2000 - 2006 MR2 Spyder, 1992 - 1997 Paseo, 1987 - 1995 Pickup, 1991 - 1997 Previa, 2001 - 2018 Prius, 1996 - 2016 RAV4, 2001 - 2016 Sequoia, 1998 - 2016 Sienna, 1986 - 1998 Supra, 1993 - 1998 T-100,. 1995 - 2016 Tacoma, 1987 - 1998 Tercel, 2000 - 2018 Tundra, 1987 - 1990 Van, 2009 - 2015 Venza, 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Yaris.

Built-in remote turn-on circuit. Accepts both high-level low-level input. Single stereo gain controls. Ultra-compact housings achieved by recessing transformers into circuit board. High powerconservatively rated 55W per channel. Pro series 2-channel high power line output converter. Designed to optimize audio levels between radio and amplifier to achieve the best audio quality. Ideal use when replacing factory OEM radio or amplifier. Configurable for speaker level or RCA level inputoutput. Ultra-Compact size for greater installation flexibility.

The yukon add Sub Bass Amp Amplifier Adapter Interface replacement for GMC GMC Canyon 2015-2018, GMC Sierra 1500 2500 3500 2019-2022, GMC Yukon 2015-2022.. The camaro add an amp adapter replacement for Chevrolet Chevy Camaro 2016-2020, Chevy Colorado 2015-2019, Chevy Malibu 2016-2021, Chevy Silverado 1500 2500 3500 2014-2021, Chevy Suburban 2015-2020, Chevy Tahoe 2015-2020, Trax 2017-2019, Chevy Equinox 2018-2021 Equinox comes in 4 different plugs, but Only fits for Green Plug . Easy to install. A camaro add an amp harness for chevy No need to cutting any OEM wire. As well as with remote wire for the remote amplifier turn on wire. Fully adjustable gain control. The sierra amp wiring harness use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install.. RCA 2-channel line output for Silverado converter to provide an audio signal to an external amplifier.. Note add an amp for GM not compatible with factory amplified stereo systems like JBL, Bose, etc. Only works with factory non-amplified systems no JBLSynthesis, Bose, etc.. No factory external amp systems..

Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Adjustable gain output.. Provides one pair rca output and a power wire for the remote amplifier turn on connection. Connection is done at back of radio.. VERY IMPORTANT----PLEASE READ BEFORE PURCHASE---- Not compatible with factory amplified stereo systems like JBL, Bose, etc. Only works with factory non-amplified systems no JBLSynthesis, Bose, etc... Compatible with Chrysler 2015-2017 200 Dodge 2013-2016 Dart 2014-2018 Cherokee, 2018 Compass, 2015-2019 Renegade Ram 2013-2019 Ram Truck, 2014-2019 Promaster not compatible with 2014-2016 radio delete or amfm only models, 2015-2019 Promaster City.

Used to add an amp or sub to your factory system.. One complete piece, no need to tape wires together.. Comes with an inline converter.. Fully adjustable gain control.. See description for fitment.

Used to add an amp or sub to your factory system.. One complete piece, no need to tape wires together.. Comes with an inline converter.. Fully adjustable gain control.. Compatible with - Honda- Accord 2008-2012 Civic 2012-2013 Crosstour 2010-2012 CRV 2012-2013 CRZ 2011-2013 Fit 2009-2016 Insight 2010-2013 Odyssey 2011-2013 Pilot 2009-2013.

Car audio speaker level converter wiring adapter allows to add 2 channel or mono amplifier or subwoofer to existing factory or aftermarket car stereo kit.. Convert car stereo speaker wire output to RCA Cable outputs. In order to improve the sound quality, the function of RCA output can be convert high to low. The high voltage signal output of the amplifier or speaker to convert low-voltage signal.. Convenient to use. There is the level gain adjustment to adjust the bass down without having to pull over and manually adjust the amplifier.. Easy to install. Use this adapter when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input. Tap into a speaker wire and it senses the signal, and turns on a relay to send power to the amp.. Reasonable and neat power plug, it has the prefect bonding and contact stability. Provide clean and excellent sound..