Top 10 Best Fan Controller Hub

CABLE MANAGEMENT Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing. SYNCHRONOUS FAN CONTROL Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system. EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. EXTERNAL POWER SUPPLY The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. TECHNICAL DETAILS Output 10 x 4-pin PWM Socket, Output Current up to 1 A per Port, Input SATA Power 4-pin Fan Header, Input Current up to 4.5 A, Dimensions 55.6 x 86.3 x 14.3 mm, Weight 50 g.

The CORSAIR iCUE COMMANDER CORE XT turns your case into a smart case, using CORSAIR iCUE software to conveniently control up to six case fans and dual lighting channels for multiple RGB components.. Powers and controls up to six PWM fans for precise adjustment of fan speeds, including Zero RPM mode to keep the noise down at low loads.. Control up to 264 RGB LEDs out of the box directly connect up to six CORSAIR RGB fans, as well as an additional lighting channel to control other CORSAIR RGB devices such as Hydro X Series lighting, RGB LED Lighting PRO Expansion Kit light strips, or an RGB Fan LED Hub with up to six additional RGB fans.. The COMMANDER CORE XT intelligently detects any combination of up to six individually addressable CORSAIR RGB fans, such as the high-performance ML PRO RGB and the ultra-vibrant QL RGB, making them easier than ever to set up.. Two included repositionable temperature sensors allow you to accurately monitor temperatures throughout your system with CORSAIR iCUE software.. A USB 2.0 pass-through port lets you connect an additional internal USB device, such as a CORSAIR AXi Series PSU or PRO XT cooler.. Set up custom fan curves and lighting profiles to automatically adjust fan speeds and RGB lighting based on system temperatures.. Powerful CORSAIR iCUE software offers a single interface to customize RGB lighting, monitor CPU and coolant temperatures, adjust fan speeds, and set up fan curves.. Embedded magnets and a low-profile design make it easy to install the COMMANDER CORE XT on any flat surface inside your case..

Supports 10 4-pin Independent Fans Capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis. Direct SATA Power Input Powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use. Included TiesVelcro for Easy Placement 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place. Blue LED Power Indicator.

Thermalright is a Taiwanese brand with more than 20 years of development. It has a certain popularity in domestic and foreign markets and has a decisive influence in the player market. R D product lines include CPU air-cooled radiator, chassis cooling fan, thermal conductive silicone pad, thermal conductive silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.. Built in strong double-sided sticker, fixed on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load.. Small body, large capacity. Multi line control to keep cables in order.. This fan hub supports the installation of 10 groups of fans, making it easy to manage wiring. Strong paste installation mode, convenient SATA power line direct transmission, and safety is guaranteed.. Support fan speed reading and PWM Fan regulation. due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized..

12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin4pin fans.. Installation steps The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub's PWM cable to the motherboard. Connect the SATA cable to the fan hub.. Equipped with PWM cable The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board.. Convenient installation the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well Fixed in the chassis.. Package content 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable.. Compatible devices Desktop.

Expand Fan Interfaces - Excellent 1 to 8 splitter 8 way 4-pin and 3-pin PWM fan power supply extension hub, it provide a better power supply solution for PC computer case internal motherboard cooling fans.. Function - Through this hub, the governor can supply power to up to 8 fans, and the rotating potentiometer can adjust the speed of 8 PWM fans at the same time.. Widely Compatible - For both 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 17A to avoid damage to the governor.. High Performance - The high-performance fully black circuit board is adopted, the hub is small in size and convenient to use, the material is strong and the resistance is small, which does not affect the fan performance.. Glue Fixation - The thickened 3M glue is used to fix it, which has strong adhesion, easily fits inside your pc case and can firmly fix the fan hub inside the chassis..

Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note Max current limit is 3A in total, check the spec of fan first.. In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface with speed detection function. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.. There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control.. If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..

SATA Cooling Fan Splitter Suit for 12V 3Pin fan 8 channels.Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.. Suit for 12V 3Pin fan 8 channels.Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.. Built-in double-sided adhesive This compact HUB easily fits inside your pc case. It can be used to fix the hub in the chassis.. 8 way without speed measurement and PWM function, you can manually adjust the gear position, start the fan at full speed LOW or low speed LOW, or turn off the fan.. EASY INSTALLATIONIt is very easy to setup. Connect your RGB items to the hub, connect the cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power..

8-way fan splitter board for powering, controlling and monitoring multiple fans, transmits PWM signal from PC motherboards or optional NA-FC1 fan controller to all connected fans. 4-pin for 5V and 12V fans and S-ATA for 12V only inputs can be used simultaneously power via S-ATA, RPM PWM via 4-pin, safety fuses provide protection against overcurrent and short-circuits. Up to 54W total power via S-ATA 12V fans only and 24W via 4-pin interface, ideal both for 12V PC case fans and 5V applications with Noctua 5V fans that include USB power adaptor cables. Easy installation on any magnetic surface such as steel PC case panels thanks to four strong mag-nets, included NA-EC1 input cable for connection to motherboard fan headers. Full compliance with all applicable safety standards EN 62368-1, EN 55035, EN 55032, UL-507, CE, UKCA and UL certification, renowned Noctua quality backed up by a 6 year manufac-turers warranty.

CABLE MANAGEMENT Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing. SYNCHRONOUS FAN CONTROL Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system. EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. EXTERNAL POWER SUPPLY The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. TECHNICAL DETAILS Output 10 x 4-pin PWM Socket, Output Current up to 1 A per Port, Input SATA Power 4-pin Fan Header, Input Current up to 4.5 A, Dimensions 55.6 x 86.3 x 14.3 mm, Weight 50 g.