Top 10 Best Fluke Network Tester

Copper cable verifier for testing voicedatavideo with integrated RJ11, RJ45, and coax cable, test ports support low voltage testing with no need for adapters, ensures high quality installations and expedites cable problem resolution in active network environments. Includes MicroScanner2 cable verifier with detachable wire map adapter, user guide, 2 AA alkaline batteries, carry pouch, 1 year warranty. Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, shows 4 test modes at once Graphical wire map, pair lengths, distance to fault with TDR, cable ID, and far end device, detects 101001000 Ethernet, POTS, and PoE. Cable Tests include Length 460 meter or 1500 feet with resolution to 0.3 meter or 1 feet, wire map to TIA 568AB standards, remote ID locators. Coax F connector for 75 ohm, 50 ohm, 93 ohm cables PoE detection Solicits and detects the presence of 802.3af compatible PoE Power over Ethernet devices to rule out power as source of problems. Rugged housing with integrated rubber easy grip holster and magnetic strap, locates virtually any cable or wire pair with Intellitone digital and analog toning, probe sold separately.

Cable Performance testing up to 10GBASE-T via frequency-based measurements. Network features including IPv4 and v6 ping, nearest switch diagnostics IP address, name, port VLAN number, and advertised data rates. Ethernet Alliance certified PoE Verification Detects the PoE class 1-8 and power, and performs a load test of available PoE from the connected switch. Displays cable length, wire map, and distance to open or short . Manage results and print reports from LinkWare PC .

IntelliTone digital toning eliminates noise and false signals. SmartTone analog toning precisely isolates individual wire pairs. Locates cables safely and effectively on active networks. Verifies twisted pair installation with visual end to end continuity test. Probe detects digital signal and 1 kilo hertz signal from the analog toner. Probe has built in pair tester to identify open, shorted and crossed pairs. Signal strength indicator LEDs so you can help identify 1 cable that is bundled with other cables. Confirms cable location, verifies cable continuity, and detects cable faults opens, shorts, and reversed pairs in 1 step.

Qualifies cabling performance for 10100Gig Ethernet, tests all copper media cabling twisted pair Category 5-6A, coax, and audio. Includes CableIQ Qualification Tester with detachable wiremap, IntelliTone 200 Digital Probe, Remote IDs No. 2-7, 2 RJ45RJ45 patch cords, USB cable, coax 'F' push on adapter, 75 ohm coax patch cord, RJ4511 universal coupler, RJ11RJ11 patch cord, user guide, 4 AA and 1 9V alkaline batteries, test accessory soft pouch, duffel style bag, 1 year warranty on testers. Advanced troubleshooting features length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet POE detection. Works on live networks to provide Ethernet switch detection and device configuration, isolate network issues from physical cabling issues. Locate and trace cables with digital toning technology with included IntelliTone 200 Digital Probe, discover what is at the end of any cable and display device configurations speedduplex, pairing.

Copper cable certifier for TIA category 5 through 6A, twisted-pair cabling with touchscreen project management, 10 second Cat 6A test time, TIA Level IIIe accuracy, professional reports through free LinkWare software service, advanced troubleshooting, 8-hour battery life. Includes Versiv main with USB and Wi-Fi, remote unit, 2 1 GHz copper testing modules, 2 permanent link adapters, 2 channel adapters, 2 battery chargers, 2 two-way headsets, 2 carryhanging straps, 2 handstraps, RJ-to-RJ adapters, carrying case, USB interface cable, Versiv open source software CD, Statement of Calibration and user guide, 1 year warranty. Measures Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss Attenuation, Return Loss RL, NEXT, Attenuation-to-crosstalk Ratio ACR-N, ACR-F ELFEXT, Power Sum ACR-F ELFEXT, Power Sum NEXT, Power Sum ACR-N, Power Sum Alien Near End Xtalk PS ANEXT, Power Sum Alien Attenuation Xtalk Ratio Far End PS AACR-F. Contractors using Versiv report a two-thirds reduction in certification costs due to the project-based ProjX Management system which reduces errors the smart-phone-like Taptive interface which speeds setup and a future-ready platform that supports fiber loss and inspection, OTDR testing through optional hardware modules. Graphically displays the location of failures including crosstalk, return loss and shield faults for faster troubleshooting.

Cable Performance testing up to 10GBASE-T via frequency-based measurements and support of EtherNetIP, PROFINET, EtherCAT. Network features including Nearest Switch Diagnostics including advertised data rate, switch name and port number, and VLAN.. PoE Verification Detects the PoE class 1-8 and power, and performs a load test of available PoE from the connected switch. Includes IntelliTone Probe to assist in locating cables.

Cable tester for simple verification of wiremaps and identification of faults with LEDs. Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs. Remote identifier enables one-person testing. Easy-to-read fault display on cable tester.

SimpliFiber Pro optical power meter with multimode light source. Supports multimode 850 and 1300 nm wavelengths. Reduce test time by testing and recording dual wavelength from a single measurement port. Check active feature warns use when connected to a live fiber. Stores 1000 readings and mixmax. Kit includes power meter, light source, carrying case and batteries. Magnetic strap attachment allows technicians to keep their hands free and their tester safe from potential drops and accidents with its strong rare earth magnet.

The laser powered visifault visual fault locator is a cable continuity tester that locates fibers, verifies cable continuity and polarity, diagnose and repair simple fiber link problems and find breaks in cables, connectors, and splices in splice trays and tight fiber bends in and around equipment racks. Includes Visifault visual fault locator, 2.5 millimeter universal adapter for easy connection to sc, st, fc, and fj connectors, 2 aa batteries, lanyard, soft sided carry case with belt loop. Bright red high visibility laser driven VFK enables verification of continuity, polarity and visual location of many near end fiber faults with easy tracing of many fibers either in a cable or terminated in a rack. Accelerates end to end fiber continuity checks, speeds fiber tracing and identification, features continuious wave for steady illumination or flashing output modes for easy identification, verify proper polarity and orientation of fibers with a multi fiber connector like the mt rj. Connects to 2.5 millimete connectors sc, st, fc, and fj, rugged and built to last for demanding field applications, attaches with handy lanyard or carrying case so it's always on hand when you need it Connect to 1.25 millimeter connectors lc and mu with the nf380 adapter sold separately.

Detects dial tone and polarity, and places and receives calls during testing of telephone lines. High impedance datasafe operation in monitor mode. Drop safe reliability passes 20 foot drop test. Rain safe protection in severe weather conditions. Mute switch, last number redial, and audible ringer for call backs.