Top 10 Best Gabinetes Pc

Motion Sensor Remote Control The under cabinet lights wireless have 2 modes motion sensor and remote control. The sensor mode activates when human motion is detected within 10-13ft and automatically turns off after 15-20s. The motion sensor lights can also be controlled with the included remote allowing for easy onoff, timer settings, dimming, and color switching. Measure 7.87 L x 1.57 W x 0.51 T, they are lightweight and ideal for providing auxiliary lighting in hard-to-reach areas.. Sensitivity USB C ChargingBy enhancing PIR technology, we have boosted the wireless sensor sensitivity and brightness of the under cabinet lights by 30. It offers 2 sensing modes - night sensing and day sensing, and utilizes a more widely compatible Type-C interface to charge the built-in 1100mAh Li-ion battery, taking about 2 hours for a full charge. In Motion Sensor mode, the lights can power under cabinet lighting for 30 to 50 days when LED lights are activated 3-5 times per day. 15 Color Timer DimmableOur motion sensor night lights provide gentle illumination, with a 180 lumen rating that covers a large area. You can select from white, warm white, cool white, and 12 colors in Remote mode, including 2 sensor mode, 5 brightness levels, 3 dynamic modes flash, fade, or smooth, and 3 timer options 30, 60, or 90 minutes. If no timer is set, the closet light will automatically turn off after 120 minutes. To cancel all timers, simply press the cancel button on the remote.. Wireless InstallationOur motion sensor lights indoor is effortless to install and takes only seconds Simply attach it to any clean surface with the built-in adhesive magnetic strip, eliminating the need for screws or wires. You can choose between two installation methods - directly attaching it to metal surfaces or utilizing the adhesive tapes and metal pieces. When needed, you can easily remove the motion-activated LED light strip for illumination anytime. Versatile Applications SZOKLED under counter lights can be used for a variety of applications, such as in kitchen cabinets, cupboards, countertops, bookshelves, displays, closets, and more.

Cost-effective Choice - MUSETEX Y4 gaming pc case comes with 6 ARGB fans as a gift, which brings more wind and better heat dissipation than 3 or 4 fans, which can protect the case hardware and prolong the life of the case. Also, it is equipped with a unique high-quality magnetic tempered glass side door, which not only provides strong heat dissipation to the chassis, but also displays the cool and colorful lights and various figures of the chassis. The perfect choice for your high-end gaming desktop. Avant-garde Design - This computer case is a new case designed according to 98 of users' needs. 1 Superior and handsome body, stylish and generous panel design to keep up with the trend, with MUSETEX luminous fans can achieve extremely cool lighting visual effects. 2 The chassis shortens the length of the body, reduces the occupied area and frees up more space for the desktop. At the same time, the heightened design can meet the convenient installation of more hardware and provide better heat dissipation performance. Note It is recommended to use a full-module power supply, graphics cards over 300mm are not compatible with this chassis, please choose carefully. Unique Door Opening Design - This PC case is specially designed for case enthusiasts with a tempered glass side panel that can be opened very popular in 2022, equipped with magnetic buckles and metal pull rings, which are easy to open for the installation of computer accessories. Compared with the case without opening the door, the heat dissipation effect is increased by 70. At the same time, the tempered glass with high light transmission can fully display any accessories you want to install in the case and ARGB light show.. 6 ARGB Fans as Gifts - The ATX case is pre-installed with 6 120mm ARGB fans, which can be synchronized with the lighting of the case fans with the control board that comes with the case. 1LED Button control Multiple lighting mode changes can be achieved through LED button control on the IO panel 2Mainboard control Connect the 5V3PIN cable on the control board to the mainboard, and the mainboard mode can provide excellent customizable lighting , reaching 16.8 million color variations. Double the fun Note 12V 4PIN motherboard is not suitable for motherboard control, Button control is recommended.. Short Body But Ample Space - Mid-tower case can easily install ATX Micro-ATX Mini-ITX. The maximum cooling height of the CPU is 160mm 6.29'', which can meet a variety of CPU coolers. The chassis also provides multiple hard drive fixing positions, supporting the installation of 3 x 2.5 SSD1 x 3.5 HDD or 2 x 2.5 SSD2 x 3.5 HDD.. New Features of Type-C Panel - The IO panel on the top of the gaming computer case is installed on the side, with a novel design, and the cable outlet is located on the back panel, which is convenient for cable management. Provided Type-C and 2 USB 3.0 ports can maintain faster transfer speeds without additional upgrades in the future.. Compatible with Different Radiators - The top of this tower pc case is designed to fit 120240mm radiators. After installing the radiator, you can install the 2 fans on the top above the power compartment to achieve a stronger cooling effect. And the radiator can be connected to the corresponding interface of the control board through a 5V 3PIN cable, and the color change can be synchronized with the chassis fan..

Full Acrylic Side Window RGB ready Mid Tower case. Elegant backslash LED with 13 lighting modes on front panel. 6 RGB flow lighting modes. 7 solid color modes. Supports liquid cooling 240mm radiator in the front panel. Supports air cooling 120mm fan on top to enhance cooling performance. Supports high-end graphics cards up to 371mm. Supports VGA fan bracket design two 120mm fans for superior cooling performance of VGA. Supports SD or microSD memory card. Dual chamber design for improved ventilation. Removable PSU dust filter for easy cleaning. Steel Thickness 0.5mm. Motherboards ATXmicro ATXmini-ITX. Liquid Cooling Front 240mm Radiator Optional.

Panoramic Views No corner pillar. The Y60 features a 3-piece panoramic tempered glass design for the ultimate photo and display potential. See your build the way it was meant to be seen from the left or right side of your desk with a simple turn.. Exclusively Vertical GPU Mounted Why would you want to see your graphics card any other way. Included PCIE 4.0 Riser Cable A protective riser cable canopy integrates beautifully into the case, allowing for half-height PCIE cards behind the throne of the vertical graphics card. The protective shroud is the first of its kind, made specifically for the Y60.. Antechamber Construction Segment cables from thermal components and turn your PC into a work of art.. Cold Floor Cooling Eliminate hot spots with sweeping lateral vents from fans tastefully tucked into the basement of the Y60.. Included Fans The three pre-installed Flow FE12 fans with fluid-dynamic bearings provide whisper-quiet operation..

Two-Tone Design A stunning two-tone design on the front panel to show off that ARGB fan in the front.. ARGB Fans Equipped with 4x ARGB 120mm fans, your customization options are endless.. Tempered Glass Side Panel A 4mm tempered glass side panel lets you show off everything you have in your system.. Insta-Light Loop Button Create profiles and quickly control the fan color and lighting effects with the Insta-Light Loop button..

Ultimate Thermal Performance - The computer case with tempered glass side panel possessing magnetic buckle and metal pull ring is easy to install the hardware, and can be opened at any time, improving the ultimate thermal effect, which improves 76 of the cooling effect than the non-opening panel case.. 6 Pre-Installed 120mm ARGB Fans - Suitable for enhanced cooling. With the pre-installed ARGB controller you can sync it with the motherboard, each addressable ARGB fan offers 16.8 million colors for exceptional customizable lighting. You don't need to pay extra for fans. Only when the 5V3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized. Note 12V 4PIN motherboard is not suitable for motherboard control, Button control is recommended.. Powerful IO Panel - TW8's IO panel includes 2 USB 3.0 ports for faster transfer speed. At the same time, there are exclusive LED buttons to freely control your ARGB color light.. Clean Design - Large front mesh front panel for optimal cooling performance, and the high light-transmitting glass side panels show off your computer's ARGB lighting.. More Storage Space - The mid tower pc case provides multiple hard drive fixed slots, supporting to install 4SSD 2HDD or 5SSD 1HDD.. Compatible with Different Radiator - The top of the pc case is designed to fit 240mm 280mm radiators. After installing the Radiator, the original 2 fans at the top can be installed at the above the power supply compartment to achieve more powerful cooling effect. And the radiator can be connected to the ARGB controller through 5V 3PIN to achieve 6 fans sync color.. The Best Choice - MUSETEX TW8 has 6 ARGB fans supporting external expansion ARGB controller, and is equipped with superior magnetic tempered glass side doors. It is the best choice for you to create a high-end gaming desktop..

Build in full view with the 7000X RGB, showcasing your system behind three gorgeous tempered glass panels while making it easy to build and cool thanks to clever cable management and a spacious interior.. The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single hidden channel, with an easy-access hinged door and a roomy 30mm of space behind the motherboard for all of your cables.. Includes four 140mm CORSAIR SP RGB ELITE PWM fans with eight individually addressable RGB LEDs per fan, utilizing AirGuide technology to concentrate airflow and enhance cooling.. An included CORSAIR iCUE COMMANDER CORE XT Controller, CORSAIR iCUE software, and PWM fan repeater enable smart RGB and fan speed control out of the box.. A massive interior lets you fit up to 12x 120mm or 7x 140mm cooling fans, or install multiple radiators including 3x simultaneous 360mm or 2x simultaneous 420mm for extreme cooling.. A motherboard tray with customizable fan mounts allows you to side-mount up to 4x 120mm fans or up to a 420mm radiator, opening up a new world of cooling options.. Put the spotlight on your graphics card with a three-slot vertical GPU mount on the PSU shroud, big enough for todays most powerful graphics cards.. A fully equipped front IO panel includes a USB 3.1 Type-C Port, 4x USB 3.0 ports, and a combination audiomicrophone jack.. Holds all the storage youll need for years, thanks to 6x combo 2.5in 3.5in drive trays and 4x 2.5in SSD mounts.. A windowed PSU shroud is fully customizable for your own personalized inserts, perfect for creating a jaw-dropping mod..

Mid-tower with support for EATX motherboards featuring a metal chassis, 4mm-thick smoked, tempered-glass full view side panels, three easy-to-clean dust filters, and space for 9 Storage drives. Premium cable management includes translucent rear panel, adjustable multi-function cover featuring GPU support brackets and pre-run chassis cables. Keep your cool with built in fan hub, four 140mm fans and up to seven optional fan-mounting points. Custom Liquid Cooling ready features a water pump reservoir mounting bracket and support for radiators up to 420mm in length and 90mm thick with fans. Graphic card mounting options include Up to 2x vertically mounted Graphics cards or 3x horizontally mounted Graphics cards using the 7 expansion Slots.

Unique Pangolin Design The case was designed according to the shape of the pangolin, it makes your case different from others. Besides, the holes of the case can provide your case better airflow.. Dual Tempered Glass Side Panel The 2pcs transparent tempered glass side panels can clearly show your internal components and it is easy to install with screws.. Superior cooling system The case can support up to 7pcs 120mm fans and max 360mm water cooler, it provides your case better airflow and keeps your components cooling all the time. NOTE The fans are not included in the case. Sufficient Internal Space ATX, Micro-ATX, Mini-ATX motherboard support, it can be installed 2pcs SSD and 2pcs HDD drive bays, support CPU coolers up to 170mm tall and GPU up to 350mm long.. Multi-Functional IO Panel POWER HD AUDIO 2x USB2.0 USB3.0 on the IO panel, it can provide you great flexibility for various mobile audio accessories..

Powerful cooling -- C570 PC case is pre-installed 7 RGB Fans. The unique open design can keep the GPU Temperature continuously low,making your computer work more smoothly.. 2 Tempered glass-- C570 gaming case is equipped 2 4mm thick tempered glass, which can clearly see the RGB lighting and the components in the building, Creating a good gaming atmosphere.. SYNC RGB-- KEDIERS Tower Case Fans can be controlled by computer softwareremote control equippedRGB buttons.. IO Panel-- 2 x USB3.0 Port, 1 x USB2.0 Port, 1 x HD Audio, RGB Button, Power Button.. Remarkable Expansion-- C570 Mid Tower Gaming Computer Case supports ATXMicro-ATXMini-ITX motherboards..

Ultimate Thermal Performance - The computer case with tempered glass side panel possessing magnetic buckle and metal pull ring is easy to install the hardware, and can be opened at any time, improving the ultimate thermal effect, which improves 76 of the cooling effect than the non-opening panel case.. MUSETEX PC Case NN8 New Features - The top IO panel provides Type-C and 2 USB 3.0, holding the faster transfer speed and requiring no additional upgrades in the future.. 6 Pre-Installed 120mm ARGB Fans - Suitable for enhanced cooling. With the pre-installed ARGB controller you can sync it with the motherboard, each addressable ARGB fan offers 16.8 million colors for exceptional customizable lighting. You don't need to pay extra for fans. Only when the 5V3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized. Note 12V 4PIN motherboard is not suitable for motherboard control, Button control is recommended.. Elegant Design - The diamond mesh front panel has a three-dimensional contour for optimal cooling performance, and the high light-transmitting glass side panels showcase your computer's ARGB colors.. More Storage Space - The mid tower pc case provides multiple hard drive fixed slots, supporting to install 4SSD 2HDD or 5SSD 1HDD.. Compatible with Different Radiator - The top of the pc case is designed to fit 240mm 280mm radiators. After installing the Radiator, the original 2 fans at the top can be installed at the above the power supply compartment to achieve more powerful cooling effect. And the radiator can be connected to the ARGB controller through 5V 3PIN to achieve 6 fans sync color.. The Choice of The Top Computer Case - MUSETEX NN8 has 6 ARGB fans supporting external expansion ARGB controller, and is equipped with superior magnetic tempered glass side doors. It is the best choice for you to create a high-end gaming desktop..