Top 10 Best Gas Appliance Connector Kit

Kit Content Size48 gas dryer installation kit has an outside dimension of 58, and inner diameter 12. gas line connector adapter 2 Pcs 1516 -16 UN to 12 FIP, 2 Pcs 1516- 16 UN to 12 MIPTapped 38 FIP , 2Pcs 1516-16 UN to 34 MIPTapped 12 FIP , Six thread adapter fitting in total. and 1 set threaded tape.. Wide ApplicationOur flexible gas line designed for gas dryer, gas stove,gas range, etc. It has an thicker pipe diameter can provide more gas, optimal flow rate up to 106K BTU flow capacity. And the threaded connectors are suitable for most conventional equipment. NOTE Please check the connector adapter size carefully to make sure that they fits your machine.. Corrugated DesignStainless steel gas dryer installation kit is designed with corrugation, for better use in a narrow range. The corrugated pipe has high level flexibility, it can go anywhere. At the same time, the bright yellow rind also improved identification.. Easy to InstallNo need for more connectors, just make sure your sizing fits our dryer gas line, only one wrench and a little bit teflon tape are all you need. Trust me, no more than 2 minutes, Easily connect your appliance to your gas duct with ease.. Premium QualityGas dryer connector kit is made of durable materials, with excellent flexibility, high and low-temperature resistance, etc. In addition, our dryer gas line kit is 100 Leak Tested, It has good air tightness, durability, rust and corrosion resistance, so, it is duable and longevity.. Excellent After-sales ServiceIf you have any problems about our gas line, please tell us, our service team will help you out within 24 hours. Additionally, you can enjoy dryer gas line warranty within 1 year during which you can claim replacement or refund if the gas line has any quality-related issues..

INCLUDES EVERYTHING FOR INSTALLATION - This Gas Appliances Installation Kit Includes 48 flexible gas line with 12 Female Flare on both end , 3 different adapters 12 Male Flare x 12 Male Pipe, 12 Male Flare x 38 Male Pipe 12 Male Flare x 38 Female Pipe, 12 brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install.. HIGHLY DURABLE LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100 Leak Tested, CAS certified it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances.. CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise.. BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown.. COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..

SIZE- Length 36 inch flexible yellow coated 304 stainless steel gas connector hose, flexible gas hose supply gas line connector adapter2 pack 34 Inch FIP, 2 pack 34 Inch MIPTapped 38In FIP , and 1set threaded tape.. HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100 Leak Tested, CAS certified It has good air tightness, durability, rust and corrosion resistance.. COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor.. EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape Otherwise it will cause air leakageBut the other side of the joint should be wrapped.. GUARANTEE AND SERVICE- Safe use is always the first goal of the product.Our products have gone through many quality checks and we never compromise on quality. Any questions about installation and use can feel free to contact us, we are happy to serve you 24 hours..

Designed for Ranges, Stoves, Furnaces or Boilers.. Included Adapters - 90-3031-2- 58 In.OD Flare X 12 In. MIP Tapped 38 In. FIP - 90-3041-1- 58 In.OD Flare X 34 In. MIP Tapped 12 In. FIP. 106,000 BTU. 100 Factory leak tested. 304 Stainless Steel flexible tubing with plated steel end fittings.

4ft Gas Connector Long stainless steel gas connector, giving you flexibility when positioning your gas dryer or gas water heater the 48 length gives you the choice to place your appliance away from the gas source. Stainless Steel Hose Made from durable, corrosion-proof stainless steel exterior, this connector is robust and will not kink or crack. Universal Connection The hose comes with a outside diameter 12 MIP to inside diameter 38 FIP connection, making it compatible with virtually any gas-powered appliance including most models of gas dryer and water heater. Note that a shutoff valve should be installed ahead of the connector. EvertechPRO Universal gas dryer connector replacement part numbers 58690 20-48KITRC 5304490734 PM15X104. Replace For Safety To ensure maximum safety, its recommendable to check and replace your gas connectors regularly. This 48 gas connector is the ideal replacement for an older potentially leaky gas connection. Guaranteed Quality We offer a 90-day money back guarantee and a 1 year full warranty in case of manufacturing fault.

Designed for High BTU applications such as Commercial hot water heaters, Outdoor back-up generators, Tankless water heaters, Commercial Furnace or Bolier. Included Adapters - 90-4041-1 - 34 In.ID Flare X 34 In. MIP Tapped 12 In. FIP - 90-4042- 1 - 34 In.ID Flare X 34 In. FIP. 290,900 BTU. 100 Factory leak tested. 304 Stainless Steel flexible tubing with plated steel end fittings. Indoor or Outdoor Use. CSA Approved. BAA Compliant.

58 Outer diameter x 72 length 6 Ft. stainless steel gas connector with SafeGuard coating for anti-corrosion and air-tight protection. 3 Brass fittings included 12 MIP tapped 38 FIP 2 pcs, and 34 MIP tapped 12 FIP 1 pc. 4-Mil high-density PTFE sealant tape 12 x 520, gas leak detector, installation instructions included. Designed for stoves, range, furnace, and other natural gas and propane appliances. 100 leak tested and sealed, CSA certified for indoor and outdoor use for natural, propane, LP, and LP-gas air mixtures.

Made for Gas Dryers Flexible Stainless Steel Gas Line that's mainly designed for gas dryers.It measures 72 inches and come with 12 OD 12 MIP x 12 FIP.If you encounter a situation where the size does not fit, you can try using raw material tape.. Corrugated Design The stainless steel gas pipeline hose adopts a corrugated design, which can be installed and meandered into small spaces including corners and bends. The bright yellow outer skin also improves the recognition.. Premium qualityThe product is made of high-quality, sturdy and durable stainless steel material, which is not easy to damage and it can help prolong the life of your dryers.. Easy to Install Fixing it yourself is simple and cost-effective.No need for more connectors. Only one wrench and a little bit teflon tape are all you need to install the hose.. Dispel your Concerns If you are not satisfied with the product for any reason, you may request a replacement or a full refund. If you are not sure if this replacement part is right for your appliance, please feel free to contact us or ask a question through Amazon, it would be our pleasure to serve you.

FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER. 34 Nominal Pipe size 16mm ID x 20mm OD 0.625 ID x 0.787 OD. CAPACITY 220,000 BTUH FOR LPG APPLIANCES 200,000 BTUH FOR NATURAL GAS APPLIANCES. KIT arrives with the brass connectors hand tightened for ease of installation. Comes with 2 fittings , the fittings are MALE NPT 34 both ends.