Top 10 Best Hazmat Placard

Hazmat placard set is in a fade-resistant baked-on polyester finish and includes these screen-printed legends Class 3 Flammable Liquid, Class 8 Corrosive, Class 3 Combustible Liquid, Division 6.1 Inhalation Hazard, Blank, Division 2.3 Inhalation Hazard, Division 5.1 Oxidizer, Class 9 Miscellaneous, Division 6.1 PoisonToxic.. Numer-All placards allow you to quickly change both DOT placard legends and UN numbers to easily identify the dangerous goods being hauled. Flip placards meet DOT placarding specifications of 49 CFR 172.519 for hazardous materials identification.. Stainless steel reinforced quick-release clamps hold panels securely in place.. Heavy .032 corrosion-resistant aluminum back plate for wind protection measures Side to side flanges - 13.75 350mm Left to right corners - 18.56 472mm Top to bottom corners - 18.56 472mm. Aluminum contains 75 post-consumer recycled content.. Hazmat placards comply with ISO 9000 Green Initiative, California Buy Recycled program, and EPA Comprehensive Procurement Guidelines CPG program..

Hazmat placard set is in a fade-resistant acrylic paint and includes these legends Dangerous, Class 3 Flammable Liquid, Class 8 Corrosive, Division 2.1 Flammable Gas, Division 5.2 Organic Peroxide, Class 3 Combustible Liquid, Division 4.1 Flammable Solid, Division 2.3 Inhalation Hazard, Blank, Division 6.1 Inhalation Hazard, Division 2.2 Non-Flammable Gas, Class 9 Miscellaneous, Class 7 Radioactive, Division 6.1 Poison, Division 5.1 Oxidizer, Division 4.2 Dangerous When Wet.. Flip placards meet DOT placarding specifications of 49 CFR 172.519 for hazardous materials identification.. Stainless steel spring clips hold hazardous materials placards securely in place.. Heavy .032 aluminum back plate for wind protection measures Side to side flanges -13.75 350mm Left to right corners - 18.56 472mm Top to bottom corners - 18.56 472mm. Aluminum contains 75 post-consumer recycled content.. Hazmat placards comply with ISO 9000 Green Initiative, California Buy Recycled program, and EPA Comprehensive Procurement Guidelines CPG program..

Includes 8 placard panels in a single frame Dangerous Flammable Gas 2 Poison 6 Corrosive 8 Flammable Liquid 3 Oxidizer 5.1 Radioactive 7 Non-Flammable Gas 2 Blank Placards. Placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Made in USA.

Includes 9 placard panels in a single frame Combustible 3 Flammable 3 Oxidizer 5.1 Inhalation Hazard 6 Poison 6 Corrosive 8 Miscellaneous Dangerous Goods 9 Blank Self-contained. Duo-Flip's exclusive, deep-formed aluminum frame provides stability and excellent wind protection. Panels lock in place with four stainless steel pressure fasteners. Equipped with extra sturdy mounting holes, full frames fit virtually any type of cargo tank. Made in the USA.

Hazmat placard set legends are screen printed with fade-resistant UV inks and manufactured of .024 aluminum 75 post-consumer recycled content. The legends included are Dangerous, Class 3 Flammable Liquid, Class 8 Corrosive, Division 2.1 Flammable Gas, Division 6.1 Inhalation Hazard, Division 5.1 Oxidizer, Division 6.1 Poison, Division 2.2 Non-Flammable Gas, and a Blank.. Flip placards meet DOT placarding specifications of 49 CFR 172.519 for hazardous materials identification.. J. J. Keller Dura-Clip fasteners stop clip arms from being dislodged. Stainless steel reinforced quick-release clamps hold hazardous materials placards securely in place. Available with clipped corners on top and bottom to accommodate roll-up doors and trailers.. Back plate manufactured of .016 galvanized steel 30 post-consumer recycled content and measures Side to side - 13.75 350mm Left to right corners - 18.56 472mm Top to bottom corners - 14.96 380mm.. Hazmat placards comply with ISO 9000 Green Initiative, California Buy Recycled program, and EPA Comprehensive Procurement Guidelines CPG program..

Hazmat placard set legends are screen printed with fade-resistant UV inks and manufactured of .024 aluminum 75 post-consumer recycled content. The legends included are Dangerous, Class 3 Flammable Liquid, Class 8 Corrosive, Division 2.1 Flammable Gas, Division 1.4 Explosives, Division 2.2 Non-Flammable Gas, Division 5.1 Oxidizer, Division 4.3 Dangerous When Wet, Class 7 Radioactive, Division 6.1 Toxic, and a Blank.. Flip placards meet DOT placarding specifications of 49 CFR 172.519 for hazardous materials identification.. J. J. Keller Dura-Clip fasteners stop clip arms from being dislodged. Stainless steel reinforced quick-release clamps hold hazardous materials placards securely in place. Available with clipped corners on top and bottom to accommodate roll-up doors and trailers.. Back plate manufactured of .016 galvanized steel 30 post-consumer recycled content and measures Side to side - 13.75 350mm Left to right corners - 18.56 472mm Top to bottom corners - 14.96 380mm.. Hazmat placards comply with ISO 9000 Green Initiative, California Buy Recycled program, and EPA Comprehensive Procurement Guidelines CPG program..

Flammable liquid placards are pre-printed with the word flammable, hazard class 3 and DOT-required symbol.. Class 3 placards meet DOT placarding specifications of 49 CFR 172.519 for hazardous materials identification.. Designed for short-term applications with a service temperature range of -40F to 200F and minimum application temperature of 40F.. Up to 1-year substrate outdoor durability depending on preparation, application, geographic area and exposure conditions. Clean removability for approximately 6 months depending on the substrate it is applied to and environmental exposure to UV and temperature. Adhesive will have a tendency to become permanent beyond 6 months.. Hazmat placards measure 10-34 x 10-34 and are made of .0032 thick flexible vinyl film with removable acrylic pressure sensitive adhesive backing and 50 peel-off liner..

Corrosive blank placards are pre-printed with the word corrosive, hazard class 8 and DOT-required symbol.. Class 8 placards meet DOT placarding specifications of 49 CFR 172.519 for hazardous materials identification.. Designed for short-term applications with a service temperature range of -40F to 200F and minimum application temperature of 40F.. Up to 1-year substrate outdoor durability depending on preparation, application, geographic area and exposure conditions. Clean removability for approximately 6 months depending on the substrate it is applied to and environmental exposure to UV and temperature. Adhesive will have a tendency to become permanent beyond 6 months.. Hazmat placards measure 10-34 x 10-34 and are made of .0032 thick flexible vinyl film with removable acrylic pressure sensitive adhesive backing and 50 peel-off liner..

Flammable gas worded placards display hazard class 2 and meet DOT placarding specifications.. Flammable gas placards meet DOT placarding specifications of 49 CFR 172.5199 for hazardous materials identification.. Division 2.1 placards are pre-printed with the words flammable gas, hazard class 2 and DOT-required symbol.. Up to 1-year substrate outdoor durability depending on preparation, application, geographic area and exposure conditions. Clean removability for approximately 6 months depending on the substrate it is applied to and environmental exposure to UV and temperature. Adhesive will have a tendency to become permanent beyond 6 months.. Hazmat placards measure 10-34 x 10-34 and are made of .0034 thick flexible vinyl film with removable acrylic pressure sensitive adhesive backing and 90 peel-off liner. Designed for temporary applications with a service temperature range of -40F to 200F and minimum application temperature of 40F..