Top 10 Best Hellcat Pro Accessories

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Newly release for fall 2019 by Ade Advanced Optics. Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HG54G laser which takes non-rechargeable battery. This new HG54G RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries. Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail. Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Operates with one CR13N batteriesincluded. Battery life 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm. Controlled by ambidextrous switch. It offers two modes constant-on and strobe. This allows the user to easily set their mode based on personal need or preference.

Newly release for Shotshow by Ade Advanced Optics. Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HR54 laser which takes non-rechargeable battery. This new HR54 RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries. The built-in rechargeable battery is removable and can be purchased direct from ADE for replacement.. Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output. Ultra lightweight and compact 1.79L x 1.06W x .85H. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This FDETAN body color RED Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADEs popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADEs FDE color will not 100 match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter. ADE Spike also available in Black body and RED Dot. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum in FDE body and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Newly release for 2020 Shotshow by Ade Advanced Optics. Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HG54R laser which takes non-rechargeable battery. This new HG54R RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries. Offers the brightest Red laser allowed by Law. Non-handheld class 3R laser product, 5Mw power output. Ultra lightweight and compact 1.79L x 1.06W x .85H. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

HANDLEITGRIPS Is a Veteran owned and operated company that manufactures Textured Rubber and Sandpaper grips as well as Vinyl wraps for firearms and a variety of other products.. Our products are designed to cover more surface, be more versatile, and the most advanced grips available anywhere and provide outstanding grip, comfort, and control to any firearm.. Handleitgrips are easy to install and can be fully installed in less than 7-10 minutes. Step by step installation instructions and alcohol cleaning pads are included to aid with proper preparation and install. Simple easy steps CLEAN APPLY HEAT. If your firearm is new it will need a more thorough cleaning prior to installing the grip.. Textured Rubber is our most versatile grip material we offer and works for everything. Especially conceal carry. Our textured rubber grips have outstanding grip but are less aggressive than our sandpaper material.. Will it help you shoot better It all depends on your level of experience, but it will feel amazing, a vast improvement of any stock grip..

1.. Ambidextrous. Unlimited mounting options with the tuck-able C-clip.

This Gun Pad Is A Must Have In Gun Accessories, Gun Cleaning Cloth, Cleaning patches That Are A Must Have For The Handgun Cleaning Kit. This Shooting Mat Is For Shooters Whether Youre First Time Owner Or A Seasoned Pro.

USA Made Produced with high strength, heat resistant polymer in the USA. This Blade-Tech Precision molded Springfield Hellcat Pro Holster has a superior fit to Kydex. Carry Confident with your Springfield Hellcat securely and comfortably.. USA Made Produced with high strength, heat resistant polymer in the USA. This Blade-Tech Precision molded Springfield Hellcat Pro Holster has a superior fit to Kydex. Carry Confident with your Springfield Hellcat securely and comfortably.. Concealability This Springfield Armory Hellcat Pro Holster features our streamlined OWB loops that hold your firearm securely to your body. The Total Eclipse OWB Holster is a great option for everyday Outside the Waistband concealed carry of your Springfield Hellcat Pro. This holster is perfect for those who want the comfort of an OWB holster while still being able to conceal the firearm under a garment.. Positive Lock Trigger Guard and Adjustable Retention The Total Eclipse OWB Holster for the Springfield Hellcat Pro is designed with adjustable retention and a positive lock trigger guard. Adjustable retention screws can tighten or loosen the fit of the holster around your firearm while the positive lock trigger guard provides tactile feedback to let you know your firearm is secure.. Optics Compatible Out of the box, the Total Eclipse OWB Holster for the Springfield Hellcat Pro is compatible with most optics platforms such as RMR, Red Dot and suppressor height sights.. Lifetime Warranty We offer a Carry Confident Lifetime Guarantee We are so confident in all of our holsters that we offer a 100 Satisfaction Guarantee. We guarantee every item made by Blade-Tech. No more, no less. We believe in our products and stand by the quality of workmanship, craftsmanship and materials in each one. We guarantee the lifetime of each item against failure or damage in its intended usage..

NDZ OFFERS THE BEST QUALITY SLIDE PLATE FOR THE SPRINGFIELD HELLCAT AND HELLCAT PRO Directly replace the OEM rear plate while customizing your firearm's look with many designs to choose from. Our parts are easy to install, and disassembly remains the same.. MANUFACTURED FROM PREMIUM T6 AIRCRAFT-GRADE BILLET ALUMINUM AND HARD COAT ANODIZED Expect only the best Hellcat accessories from NDZ, which are machined in-house to the highest quality standards. Mil-spec anodizing offers a tough finish, giving you the extreme durability you expect.. LASER ENGRAVED ACCESSORIES FEATURE HIGH-QUALITY IMAGES THAT WILL NOT FADE OR RUB OFF Custom Laser-Engraved accessories have a bold visual presentation. Unlike some others, some may be painted on or even have stickers. At NDZ, our images will not fade over time.. TRUSTED BRAND All NDZ parts are proudly Made In America in our Connecticut-based facility.. LIFETIME WARRANTY SO YOU CAN BUY RISK FREE All NDZ parts come with a lifetime warranty against manufactured defects. Please reach out to us in case of any issues, and we will promptly resolve them..

Optics Ready Integrated optics cut accepts most sights, providing full freedom in your setup. Next Gen Materials Boltaron polymer construction is superior to traditional, cheaper Kydex holsters in impact and temperature resistance, keeping your protection safe and ready to perform. All Day Comfort Slim profile chassis weighs just a few ounces and minimizes printing. Full length sweat guard shields your weapon from incidental moisture. Perfect Fit Custom molded for your firearm, ensuring a smooth draw and reholster, every time. Recessed design removes friction points, minimizing holster wear common to most holsters.. Superior Performance Posi Click system delivers a satisfying click, indicating your firearm is properly holstered. Adjustable retention pressure and cant 0-15 degrees allows you to custom tailor the feel to your needs.

HANDLEITGRIPS Is a Veteran owned and operated company that manufactures Textured Rubber and Sandpaper grips as well as Vinyl wraps for firearms and a variety of other products.. Our products are designed to cover more surface, be more versatile, and the most advanced grips available anywhere and provide outstanding grip, comfort, and control to any firearm.. Handleitgrips are easy to install and can be fully installed in less than 7-10 minutes. Step by step installation instructions and alcohol cleaning pads are included to aid with proper preparation and install. Simple easy steps CLEAN APPLY HEAT. If your firearm is new it will need a more thorough cleaning prior to installing the grip.. Textured Rubber is our most versatile grip material we offer and works for everything. Especially conceal carry. Our textured rubber grips have outstanding grip but are less aggressive than our sandpaper material.. Will it help you shoot better It all depends on your level of experience, but it will feel amazing, a vast improvement of any stock grip..

NDZ OFFERS THE BEST QUALITY OPTIC COVER PLATE FOR THE SPRINGFIELD HELLCAT AND HELLCAT PRO Directly replace the OEM optic cover plate while customizing your firearm's look with many designs to choose from. Our parts are easy to install, and disassembly remains the same.. MANUFACTURED FROM PREMIUM T6 AIRCRAFT-GRADE BILLET ALUMINUM AND ANODIZED Expect only the best Hellcat accessories from NDZ, which are machined in-house to the highest quality standards. Mil-spec anodizing offers a tough finish, giving you the extreme durability you expect.. THE NDZ OPTICS READY CUT SLIDE, for the Springfield Hellcat and Hellcat Pro replaces the stock cover with a durable anodized aluminum one that matches the factory look. Upgrade your Hellcat's look and quality with the NDZ Optics Ready Cut Slide Cover Plate today. TRUSTED BRAND NDZ Performance is proudly made the USA. LIFETIME WARRANTY SO YOU CAN BUY RISK FREE All NDZ parts come with a lifetime warranty against manufactured defects. Please reach out to us in case of any issues, and we will promptly resolve them..

Compatible with the Springfield Hellcat Pro with the Streamlight TLR-7A. The Belt Attachment Clip is compatible with belts that are up to 1.5'' wide.. Red-Dot Friendly Virtually compatible with any RMR or SRO. Open Muzzle Allows threaded barrels to pass through. Raised Sight-Line 15mm clearance for most suppressor height sights. Belt-Wing Mod Pushes against the backside of your belt to reduce printing. Undercut Trigger-Guard Allows full grip of firearm. Adjustable Retention Tighten or loosen the draw.