Top 10 Best Incra 1000

Table saw that delivers perfect miter cuts the first time. Solid-steel laser cut protracter head and gold anodized Track Fence. 1 angle stop with indexed stops every 5-degrees. Precision angle indexing teeth. 6 expansion points that allow for adjustments to both sides of the bar for ZERO side play.

180 Angle LOCK Indexing Stops with 1-Degree Step Spacing and Special Stops at 22-12-Degree. Patented Glide LOCK Miter Bar Expansion Disks Provide a Perfect Fit. Heavy Duty Machined and Laser Cut Components. Patented Incremental Flip Shop Stop for Prefect Cut Length Control. 110th-Degree Vernier Cursor, Telescoping Fence Expands from 18-Inch to 31-Inch Overall Length. Removable Retaining Clip for T-Slot Miter Channels.

Engraved stainless steel primary scale for precision accuracy. 41 laser cut V-stops for extreme accuracy at all popular angles. Patented GlideLOCK miter bar with 6 expansion points for quick repeats. 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths. INCRA Flip Shop Stop-Fence Positioner for optimal mitering accuracy.

Dock Lock the included INCRA Miter Gauge in Seconds. Removable t-slot retaining clips adjustable miter bar. GlideLOCK Miter Bar - The Miter 1000SE's 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard miter gauge channels. Special Edition Telescoping INCRA-LOCK Fence. Special Edition 110th Vernier Cursor. Table size For adequate support, the Miter Express requires a minimum of 11 from the side of the blade to either the left or right edges of the saw sled can be installed on either side of the blade..

To get right to the point, the new Incra I-Box is the most advanced tool ever produced. Its revolutionary design allows faster setup, greater versatility, and improved user safety compared to traditional jigs. At the same time, it's easy to use and the included 1 hour instructional DVD covers everything from basic setup to advanced decorative joinery. Use it on your table saw or router table to cut great looking box joints. Reversible design works on either side of the cutter. Exclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 18-Inch - 34-Inch range of pin widths. Exclusive INCRA GlideLOCK miter bar fits standard 34-Inch x 38-Inch miter slots with a 0.740-Inch - 0.762-Inch adjustment range. Reversible and reusable MDF sub fence dramatically reduces or eliminates tearout.

Continuing its well respected tradition of making accuracy easy. This model features INCRA's exclusive AngleLOCK Indexed Positioning that locks in miter fence angles. Features INCRA's Incremental Flip ShopStop Positioner. 364 laser cut V-stops for extreme accuracy at all angles. Patented GlideLOCK Miter Bar with 8 expansion points. 27-49 telescoping incremental miter fence. INCRA Flip Shop Stop fence positioner. Engraved stainless steel primary scale.

Micro-fine marking holes and slots at every 116, 132 and 164 instantly locate a sharp pencil point or scribe EXACTLY where you want it.. Instantly mark your position with zero uncertainty, zero parallax and zero eye strain. Flexible structure for working on curved surfaces. Ultra thin for ultra precision. Common ruler...NO. Common sense... Yes.

120 Angle LOCK Indexing Stops. 1 Degree Stop Spacing with Special Stops at 22-12 Degrees. Patented GlideLOCK Miter Bar Expansion Disks Provide a Perfect Fit. Removeable Retaining Clip for T-Slot Miter Channels. All Steel Machined and Laser Cut Components.

Bundle Includes JessEm 02120 Mast-R-Lift II Router Lift with 9-14-inch by 11-34-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems. Built-In Locking Mechanism Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations. Compatibility With a standard top plate, Mast-R-Lift II fits routers with 9-14-inch by 11-34-inch base using a unique adjustable clamping block system. Sturdy Construction Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off. Lift Shafts The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.

The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.. The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.. The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 34 x 38 with a 18 T slot slight variances from brand to brand running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 78 in diameter and is just shy of 18 to fit into to the T slot to prevent accidental lifting when feeding your stock through.. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade with the power turned off so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading..