Top 10 Best Klei Tools

5-piece kit includes essential 1000V rated insulated tools including pliers 2, wire stripper and screwdrivers 2. All tools meet or exceed ASTM F1505 and IEC 60900 standards for insulated tools. Three-part insulation with underlayer on the pliers and wire stripper provides warning sign that insulation may be compromised. VDE Certified. Made in USA. Pliers feature induction hardened cutting knives. Slim tip 2 Phillips and 14-Inch Cabinet tip screwdrivers allow for greater access into tight spaces. Diagonal Cutters Cat. No. 200028EINS cut ACSR, screws, nails and most hardened wire.

Multi-Bit Screwdriver Tool Kit is the ideal 4-Piece Multi-Bit Tool Kit for any professional. Multi-Bit Screwdriver Nut Driver, 11-in-1 Cat. No. 32500 holds 8 popular tips Phillips, Slotted, Square, Torx Bits and converts to 3 nut driver sizes. Multi-Bit Electronics Screwdriver, 4-in-1, Phillips, Slotted Bits Cat. No. 32581 has four different non-magnetic tips in one tool, includes 0 and 00 Phillips plus 18-Inch 3.2 mm and 332-Inch 2.4 mm Slotted tips. Multi-Bit Screwdriver Nut Driver, 6-in-1, Stubby, Phillips, Slotted Bits Cat. No. 32561 has a compact interchangeable shaft that holds 4 universal tips and converts to 2 nut driver sizes. INCLUDES Non-magnetic Nut Driver sizes 14-Inch and 516-Inch and Screwdriver sizes 1 and 2 Phillips, 316-Inch 5 mm and 14-Inch 6 mm Slotted. 7-in-1 Nut Driver, Magnetic Cat. No. 32807MAG allows for one-handed driving, with seven sizes in one tool. Strong, Rare-Earth magnets 14-Inch, 516-Inch, 1132-Inch, 38-Inch, 12-Inch securely hold nuts and bolts.

This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected. GFCI tester consists of two parts a Transmitter connected to the electrical outlet or fixture, and a Receiver used to scan the panel to locate the correct breaker. Receiver delivers clear visual and audible indications when the correct breaker has been located. Operates on 90-120V AC circuits. Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices. Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use. Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets.

28-PIECE TOOL KIT for the professional with 39 Pocket Tool Backpack, canvas zipper back and clear standard safety glasses. PLIERS 10-Inch Pump Pliers, 9-Inch New England Lineman's, 8-Inch Diagonal Cutting, and 8-Inch Long Nose. SCREWDRIVERS 316-Inch and 14-Inch Cabinet Tip Cushion-Grip, 516-Inch Keystone, No. 2 Phillips, No. 2 Square-Recess Cushion-Grip, Conduit-Fitting and Reaming Screwdriver. NUT DRIVERS 316, 14, 516, 1132, 38, 716, and 12-Inch with Hollow Shaft. 39-POCKET BACKPACK Tradesman Pro Tool Bag and Canvas Zipper Bag. FOLDING HEX KEY SET, Folding Utility Knife, 25-Foot Tape Measure and Torpedo Level. DUAL RANGE Non-Contact Voltage Tester with Flashlight and GFCI Receptacle Tester.

Multi-bit screwdriver nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes. Includes industrial strength heat treated bits 38-Inch, 516-Inch and 14-Inch nut drivers, 1 and 2 Phillips, 14-Inch and 316-Inch slotted, T10 and T15 TORX, and 1 and 2 square recess. Interchangeable blade for fast and easy switch out comfortable Cushion-Grip handle. Blast finish bit tips provide a firm hold and reduce cam-out. The following replacement bits are available see Cat. No. 32482 1 Phillips and 316-Inch Slotted, Cat. No. 32483 2 Phillips and 14-Inch Slotted, Cat. No. 32484 1 Square and 2 Square, and Cat. No. 32485 T10 TORX and T15 TORX. TORX is a registered trademark of Acument Intellectual Properties, LLC. Assembled in USA of US and imported components.

Pliers Tool Kit includes 3 of the most popular pliers. Lineman's Pliers, New England Nose, 9-Inch Cat. No. D213-9NE with high-leverage design puts the rivet closer to the cutting edge for 46-Percent greater cutting and gripping power than other plier designs. Hot-riveted joint ensures smooth action and no handle wobble. Diagonal Cutting Pliers, 8-Inch Cat. No. D2288 with high-leverage design puts the rivet closer to the cutting edge for 36-Percent greater cutting power than other plier designs. Short jaws and beveled cutting edges permit close cutting of wire. Pliers, Long Nose Side-Cutters, 8-Inch Cat. No. D2038 with a heavier design that gives greater cutting power. Extended handles provide added reach and leverage.

CL120 Clamp Meter measure AC current via the clamp, and ACDC voltage, resistance and continuity via test leads. Meter has backlit LCD for ease of viewing in low light and is CAT III 600V, Class 2 Double Insulated. RT210 detects the most common wiring problems in standard and GFCI receptacles. A convenient chart on RT210 helps determine wiring conditions open ground, reverse polarity, open hot, open neutral, and hotground reversed. NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications. Bright flashlight illuminates work area and may be used independent of NCVT-3P voltage detection function. ET40 tests AC voltages from 12V to 240V AC at four useful levels aligned with commonly used residential voltages.

Interchangeable Insulated Screwdriver Set with an insulated handle, 5 interchangeable insulated blades, and a carrying pouch. Screwdriver Set includes tip sizes two 2 Phillips, two 14-Inch Slotted, one 1 Phillips, one 1 Square, one 2 Square, and one 316-Inch Slotted. Securely and easily release the blade with a quick twist of the lock collar. Interchangeable blades with a slim-tip to fit tight terminal blocks. Handle and blade have a 1000-Volt insulation rating and meets or exceeds ASTM F1505 standard for insulation. A layer of orange impact and flame resistant insulation protects from electric shock. Cushion-Grip handles for greater torque and comfort.

Screwdriver and Nut Driver 16-Piece Tool Kit provides a combination of 15 screwdrivers and nut drivers and a magnetizer to magnetize and demagnetize the tips of most screwdrivers. Screwdriver Set Plus Magnetizer, 8-Piece Cat. No. 85148 is a general purpose selection of the most frequently used screwdrivers and a Magnetizer Demagnetizer. Includes a 316-Inch and 516-Inch Cabinet tip Cat. Nos. 600-1 and 601-3, 14-Inch and 516-Inch Keystone tips Cat. Nos. 600-4 and 602-6, 1, 2, 3 Phillips tips Cat. Nos. 603-1, 603-3, 603-4. and 603-6. Tip-Ident quickly identifies the screwdriver type and tip orientation. Nut Driver Set, 3-Inch Shafts, 7-Piece Cat. No. 631 wHex Nut Sizes 316, 14, 516, 1132, 38, 716 and 12-Inch. Nut Drivers full hollow shafts facilitate work on long bolt applications. Cushion Grip handles allow for greater torque and comfort.