Top 10 Best Lift O Mat Stabilus

Effortless opening of doors and lids. Softer and quieter closing. Smooth motion and stopping.. Secure holding in open and closed positions. Easy to mountinstall. Maintenance free.. Compact and attractive design. Opens to 90 Degrees. One pair does one door.. Maximum door height 24.

Package Include2 Pack gas lift supports. 14 inch 24Lbs gas shock struts compatible with Leer Topper Truck Cap, Camper Shell, Canopy Window Lift, Tool Box.. Part Number C16-06389, C1606389. Force 24 pounds of pressure.. Exact fit original equipment design ensures easy installation and precise operation.End Fittings fits 10mm nylon ball sockets.. DimensionExtended Length A in 13.98, Compressed Length B in 8.90, Stroke C in 5.08.. Vehicle Location Gas spring lift struts for rear lift doors of truck caps.Easy to install.Non-original aftermarket part..

This listing includes 2 Lift Supports for Multi Purpose Applications.. Extended Length from Center Mount to Center Mount is 24.33 in.. Lift Supports Depot supports are High Quality Lift Struts. Designed to install easily in minutes, often times without special tools.. Installs easy with no special tools required.. Compatible with the following OEM Numbers 107316, 24934, 3108392147, C1622528, C16-22528, PM3793.

CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT SEE PICTURE Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head little plastic end, to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5 size variation.. Truck Upfitters Pair of 45 pound each gas struts. 17.1 extended length and 9.9 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approx 60-80 lbs, including the weight of the camper shell locks keys.. These gas lift cylinders do not fit all camper shell brands models. Measure your strut from center of socket to center of socket when fully opened fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.. Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.. Equivalent to Suspa C16-04270 or Stabilus 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks gas springs gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper.

CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT SEE PICTURE Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head little plastic end, to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5 size variation.. Truck Upfitters Pair of 38 pound each gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 38 lbs of pressure, for a total of 76 lbs of pressure. Please note that this does not mean that it can lift something that is 76 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.. These gas lift cylinders do not fit all truck capcamper shell brandsmodels. Measure your strut from center of socket to center of socket when fully opened fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.. Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.. Equivalent to Suspa c16-09209 or Stabilus 01824. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks gas springs gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper.

CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT SEE PICTURE Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head little plastic end, to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5 size variation.. Truck Upfitters Pair of 55 pound each gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall mediumheavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys.. These gas lift cylinders do not fit all camper shell brands models. Measure your strut from center of socket to center of socket when fully opened fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.. Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.. Compatible with Suspa c16-23994 compatible with Stabilus 025657 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks gas springs gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper.

This listing includes 2 Lift Supports For the Liftgate.. Extended Length from Center Mount to Center Mount is 19.76 in.. High Quality Supports, designed to last, to OEM Standards.. Rust-resistant piston rod extends product life.. Compatible with the following OEM Numbers 110829, 218690, 3056BL, 4B-218929, 584080T011B0, 68950-0T010, 68950-0T011, 68950-0T020, 68960-0T010, 68960-0T011, 68960-0T020, SG329042.

This listing includes 2 Lift Supports For the Hood.. Extended Length from Center Mount to Center Mount is 26.38 in.. High Quality Supports, designed to last, to OEM Standards.. Rust-resistant piston rod extends product life.. Compatible with the following OEM Numbers 5344006091, 53440-06091, 5345006080, 53450-06080, 5345006081, 53450-06081, SG229038.

This listing includes 2 Lift Supports for Multi Purpose Applications.. Extended Length from Center Mount to Center Mount is 15.0 in.. High Quality Supports, designed to last, to OEM Standards.. Installs easy with no special tools required.. Compatible with the following OEM Numbers RE-029449.

Made in USA - Produced and Supplied to Automotive Manufacturer. Same performance and quality specifications. Exact replacement engineered for this application. Original opening and closing control of your hood, hatch or trunk.. Fit for 2005 - 1999, Porsche 911 Front Luggage ,2004 - 1997, Porsche Boxster Front Luggage ,1998 - 1998, Porsche 911 New Body Style Storage. Extended Length in 8,85, Force N 560. Interchange Part Numbers SG406023, 6364.