Top 10 Best Little Giants Pumps

APPLICATIONS Ideal for powering water features and pond filtration system with flows up to 9,750 GPH. CONSTRUCTION heavy-duty, stainless steel motor housing, cast iron base, professional-grade seal for enhanced motor protection. CLOG-RESISTANT DESIGN cast iron impeller capable of passing 34-inch diameter solids. MOTOR SPECIFCATIONS 115 Volts, 11 Amps, 1210 Watts, thermally protected, energy-effienct PSC direct drive motor, rated for continuous duty, CSA listed in the USA and Canada. PUMP SPECIFICATIONS 3-inch FNPT discharge, 9750 GPH at 5-ft. lift, 32-ft. shutoff, 19-ft. cord with plug.

UNIQUE DUAL DISCHARGE DESIGN this pump allows for operation of 2 water features simultaneously both discharges are 1.25-inch FNPT cap and 1.25-inch 90 barbed elbow included. APPLICATIONS high pressure oil-free direct drive pump is ideal for pond filtration, waterfalls, streams, fountains and water features up to 2400 gallons. VERSATILE this pump can be used vertically or horizontally to fit most waterfall vaults or fountains this pump comes with a 16-ft. cord. EQUIPPED WITH PRE-FILTER helps keep debris from damaging the impeller and motor removable pre-filter for easy cleaning and maintenance. SPECIFICATIONS 115 Volts 58 HP, 6.3 Amps, 700 Watts, 16-Ft. Cord, 4280 GPH at 1-ft. lift 30-ft. shut-off.

UNIQUE DUAL DISCHARGE DESIGN this pump allows for operation of 2 water features simultaneously both discharges are 1.25-inch FNPT cap and 1.25-inch 90 barbed elbow included. APPLICATIONS high pressure oil-free direct drive pump is ideal for pond filtration, waterfalls, streams, fountains and water features up to 2400 gallons. VERSATILE this pump can be used vertically or horizontally to fit most waterfall vaults or fountains this pump comes with a 16-ft. cord. EQUIPPED WITH PRE-FILTER helps keep debris from damaging the impeller and motor removable pre-filter for easy cleaning and maintenance. SPECIFICATIONS 115 Volts 58 HP, 6.3 Amps, 673 Watts, 16-Ft. Cord, 3500 GPH at 1-ft. lift 29.5-ft. shut-off.

DIRECT DRIVE FOUNTAIN PUMP Epoxy filled pump is compact in design, produces superior water flow compared to mag drive pumps and has corrosion resistant polypropylene housing. APPLICATIONS for submersible use only ideal for statuary fountains, water displays, hydroponics or small ponds up to 300 gallons. PRE-FILTER INCLUDED helps prevent the impeller and motor from getting damaged. MOTOR SPECIFICATIONS 115 Volts 140 HP 0.8 Amps 47 Watts thermally protected CSA listed in the USA and Canada. PUMP SPECIFICATIONS delivers up to 300 gallons per hour at 1-ft. lift 12.2 ft. shutoff 14-inch MNPT discharge.

SHALLOW WELL JET PUMP Red Lion Premium Cast Iron Shallow Well Jet Pump features a 1-14 FNPT suction intake and 1 FNPT outlet discharge 1 HP pump can draw up to 23 gallons per minute. BUILT TO LAST Rugged cast iron casing and volute for long life and high-efficiency glass-filled thermoplastic impeller and diffuser for durability. HEAVY DUTY MOTOR runs on either 115 or 230 volts voltage must be selected to match incoming power source Includes a capacitor for increased starting power CSA listed in USA and Canada. INCLUDES a factory pre-set 3050 pressure switch that produces a working maximum pressure of 50 PSI and pressure gauge. SPECIFICATIONS 1 HP, 17.6 Amps at 115 Volts 8.8 Amps at 230 Volts 1-14-inch FNPT intake 1-inch FNPT discharge Max Pressure 65 PSI Max Head 150 Ft..

MANUAL UTILITY PUMP For submersible use only this pump is equipped with a 25-foot power cord, 1-inch FNPT discharge and 34-inch garden hose adapter. SUBMERSIBLE PUMP Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated this pump is for submersible use only. BUILT TO LAST constructed of epoxy coated die-cast aluminum with a 16 HP permanently lubricated shaded pole motor with thermal overload protection removable screen protects the impeller and motor. Portable and compact weighing 7.4 lbs. with built-in carry handle. SPECIFICATIONS 16 HP, 1500 GPH, 115-Volt, 25-foot cord, manual operation, 2.0 running Amps, 220 Watts, 26-foot shut-off, 11.43 PSI.

UNIQUE DUAL DISCHARGE DESIGN this pump allows for operation of 2 water features simultaneously both discharges are 1.25-inch FNPT cap and 1-inch 90 barbed elbow included. APPLICATIONS high pressure oil-free direct drive pump is ideal for pond filtration, waterfalls, streams, fountains and water features up to 1200 gallons. VERSATILE this pump can be used vertically or horizontally to fit most waterfall vaults or fountains this pump comes with a 16-ft. cord. EQUIPPED WITH PRE-FILTER helps keep debris from damaging the impeller and motor removable pre-filter for easy cleaning and maintenance. SPECIFICATIONS 115 Volts 18 HP, 2 Amps, 230 Watts, 16-Ft. Cord, 1900 GPH at 1-ft. lift 20-ft. shut-off.

APPLICATIONS designed for automatic removal of water from pool covers, boat covers or rooftops - pump activates in 2-inches of water and shuts off when water drops to 1-inch. EASY MAINTENANCE access to pump float and air lock for cleaning requires no tools or screws see video for demonstration. WELL DESIGNED ergonomically built-in handle for portability and ease of placement and removal compact weighted design for stability. EASY SET-UP 1-inch FNPT discharge with 34-inch garden hose adapter included to fit standard 34 garden hose convenient 25-foot power cord ensures easy-reach of power source in most installations. SPECIFICATIONS 115 Volts 60 Hz 2.2 Amps 270 Watts 13 HP 1700 GPH at 1-ft. lift 21.5-ft. shutoff 1-inch FNPT discharge with 34-inch garden hose adapter integrated float switch 25-ft. cord.

MANUAL HYDROPONICS PUMP For submersible use only this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 34-inch garden hose adapter. SUBMERSIBLE PUMP Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated this pump is for submersible use only. BUILT TO LAST constructed of epoxy coated die-cast aluminum with a 16 HP permanently lubricated shaded pole motor with thermal overload protection removable screen protects the impeller and motor. Portable and compact weighing 7 lbs. with built-in carry handle. SPECIFICATIONS 16 HP, 1500 GPH, 115-Volt, 25-foot cord, manual operation, 2.0 running Amps, 220 Watts, 26-foot shut-off, 11.43 PSI.

AUTOMATIC SUBMERSIBLE SUMP PUMP designed for compact sump systems with integral diaphragm switch activates when water reaches 4 to 7 inches and shuts off when water drops down between 1.5 and 3.5 inches. BUILT TO LAST Epoxy-coated cast iron housing non-clog vortex style impeller upper and lower bearings nitrilecarbonceramic mechanical shaft seal. CONTINUOUS DUTY MOTOR 13 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada. APPLICATIONS designed for compact sump pump systems and general water transfer application. Must sit in water to activate the switch.. SPECIFICATIONS 13 HP 115 Volts 5060 Hz 9.0 running Amps 14.3 starting Amps 720 Watts 2760 GPH at 5-ft. lift 18-ft. shut-off 7.8 PSI 10-ft. cord 1.5-inch FNPT discharge.

MANUAL UTILITY PUMP For submersible use only this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 34-inch garden hose adapter. SUBMERSIBLE PUMP Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated this pump is for submersible use only. BUILT TO LAST constructed of epoxy coated die-cast aluminum with a 16 HP permanently lubricated shaded pole motor with thermal overload protection removable screen protects the impeller and motor. Portable and compact weighing 7.75 lbs. and equipped with a built-in carry handle. SPECIFICATIONS 16 HP, 1200 GPH, 115-Volt, 10-foot cord, manual operation, 5.0 running Amps, 380 Watts, 26.3 Ft. Shutoff, 11.4 PSI.

AUTOMATIC CONDENSATE PUMP features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers. HIGH PERFORMANCE MOTOR 130 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor CSA listed in the USA and Canada. BUILT TO LAST  stainless steel motor shaft, thermal overload protected motor CSA certified to US and Canadian standards. PUMP WITH SAFETY SWITCH can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow. SPECIFICATIONS 38-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord maximum water temperature 140 F, equipped with safety switch.

Designed For Pool's Main Drain Submersible pump is 5.9 inches in diameter and 12.2 inches tall fits in most 8-inch swimming pool main drains includes 25-foot power cord. Powerful High-Flow Pump 34 HP, PSC motor with shut-off head at 43.5' vertical height delivers up to 4260 GPH 18.9 PSIG cULus listed. Adapters Included Pump has 1-14 FNPT discharge includes 34-inch garden hose adapter and 1.5-inch barbed hose adapter fits standard 34-inch garden hose or 1.5-inch sump discharge hose. Built To Last Rated for continuous duty which allows for a wide range of applications and uses chemical-resistant FKM triple-lip seal protects the motor. Specifications 115-Volt 60 Hz 850 Watts 34 HP 4260 GPH at 0-foot lift 43.5-foot shut-off 18.9 PSIG 1-14 FNPT discharge 25-foot cord 95 F maximum liquid temperature rating.

APPLICATIONS for commercial, industrial and home applications including statuary fountains, water displays, air conditions, machine tool coolants, hydroponics and other water transfer applications. BUILT TO LAST with features such as epoxy coated die-cast aluminum housing oil-filled motor housing impedenace protected, and screened inlet which prevent debris from damaging the impeller. SMALL SUBMERSIBLE PUMP for submersible use only equipped with 14-inch MNPT discharge 3.6 inches long x 4.09 inches wide x 4.25 inches high. PUMP SPECIFICATIONS 170 GPH at 1-ft. lift 7-foot shutoff maximum 3.0 PSI 6-foot cord, 14-inch MNPT discharge rated for intermitten liquid temperatures up to 120 degrees F. MOTOR SPECIFICATIONS 1200 HP, 115- Volts, 60 Hz, 1.1 running Amps, 70 Watts, Impedence Protected, CSA listed in the USA and Canada.

AUTOMATIC SUBMERSIBLE SUMP PUMP with integral diaphragm switch activates when water reaches 7 to 10 inches and shuts off when water drops down between 1 and 4 inches. BUILT TO LAST Epoxy-coated cast iron housing non-clog vortex style impeller upper and lower bearings nitrilecarbonceramic mechanical shaft seal. CONTINUOUS DUTY MOTOR 13 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada. APPLICATIONS designed for sump pump systems and general water transfer application must sit in water to activate the switch. SPECIFICATIONS 13 HP 115 Volts 5060 Hz 9.0 running Amps 14.3 starting Amps 720 Watts 2760 GPH at 5-ft. lift 18-ft. shut-off 7.8 PSI 10-ft. cord 1.5-inch FNPT discharge.

BUILT TO LAST epoxy-coated cast iron cover, housing and volute nitrilecarbonceramic mechanical shaft seal cold-rolled steel shaft and upper and lower ball bearings. CONTINUOUS DUTY MOTOR Features an energy-efficient 5 Amp, 600-Watt PSC motor with greater energy efficiency and improved performance. AUTOMATIC OPERATION integrated contractor preferred snap-action float switch will not get waterlogged activates when water reaches 8 to 11 inches shuts off when water falls between 2 and 5 inches. SOLIDS HANDLING handles up to 12-inch semi solids. SPECIFICATIONS 13 HP, 115-Volts, 5 Amps, 600 Watts, 60 Hz, 53 GPM at 5-foot lift 28-ft shutoff 12.1 PSI, 10-ft cord, integrated snap-action float switch polypropylene base.