Top 10 Best Logic Level Converter

Logic level converter, 3.3V 5V level bidirectional transfers.. Equipped with 3.3v voltage, with power indicatore light, can provide a current of no more than 150mA to other devices.. Board Dimensions 16 15mm0.63 0.59inchL W. Package Content 5pcs IIC I2C Logic Level Converter Bi directional Module 5V to 3.3V..

The bi-directional logic level converter is a small device, which can safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time.. This level converter works with 2.8V and 1.8V devices, it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage.. Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side..

The bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time. Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. 3.It can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage.

The green board is the same as the blue board,only color not the same. Take the high voltage 5V and low voltage 3,3V for example. 5V connects to HV pin3.3V connects to LV pinGround from the system connects to GND pin.. The level converter is very easy to use, it needs to be powered from the two voltages sources high voltage and low voltage that your system is using..

Provide two-way communication capabilities.. Provide 3.3-5V, 1.8-3.3v and other common level conversion capability.. Serial communication interface compatible with UARTIICSPI port easy to connect.. Widely used in the MCU and SD card, MCU and serial devices,MCU and 5V3V module communiction.. OE active high enable IO recommended by a low voltage side of the IO port..

CONVERT DIFFERENT LOGIC LEVELSThis logic level converter features four high speed bi-directional 4 channels, allowing for safe and easy communication between devices operating at different logic levels. Converting between logic levels as low as 1.5 V on the lower-voltage side and as high as 18 V on the higher-voltage side.. SUITABLE FOR MULTIPLE INTERFACES Its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including IC, SPI, and asynchronous TTL serial.. FAST CONVERSION The logic high levels on each side of the shifter are achieved by 10 k pull-up resistors to their respective supplies these provide quick enough rise times to allow decent conversion of fast mode 400 kHz IC signals or other similarly fast digital interfaces e.g. SPI or asynchronous TTL serial. External pull-ups can be added to speed up the rise time further at the expense of higher current draw.. UNIVERSAL COMPATIBILITY Module compatible breadboard, can be directly inserted in the breadboard to use.. ATTENTIONbThis module comes with male header pins that require soldering.b.

Bi-directional 4-channel 3.3V to 5V logic level converter voltage shifter. Steps down 5V signals to 3.3V AND steps 3.3V signals up to 5V at the same time. Also works with 2.8V and 1.8V devices - you can set your high and low voltages and step up and down between them safely on the same channel. Four separate data channels on the converter board, each capable of shifting data to and from high and low voltages.

6pcs TXS0108E High Speed Full Duplex 8 Way 8 Channel Level Conversion Module 8-Bit 8 CH Logic Level Bi-Directional Converter Module. VCCA side voltage range 1.2V-3.6V VCCB side voltage range 1.65v-5.5v. Serial communication interface is compatible with UARTIICSPI port, which is easy to connect.. It can bidirectionally transfer with 8 channels between high logic voltage and low logic voltage.. Widely used in the communication between 5V SCM and 3.3V device, 3.3V SCM and 5V device. It can also apply in the level conversion between MCU and SD card, MCU and iicspi serial port devices..

8 digit bi-directional 3.3V-5V5V-3.3V logic level converter board.. It can bidirectionally transfer with 8 channels between high logic voltage and low logic voltage.. VCCA side voltage range 1.2V-3.6V VCCB side voltage range 1.65v-5.5v. Serial communication interface is compatible with UARTIICSPI port, which is easy to connect.. Widely used in the communication between 5V SCM and 3.3V device, 3.3V SCM and 5V device. It can also apply in the level conversion between MCU and SD card, MCU and iicspi serial port devices..

The bi-directional logic level converter is a small device, which can safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time.. Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.. it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage,it can works with 2.8V and 1.8V devices,. Small size1.3 1.5cm 0.51 0.59in.. Compatible with breadboard, can be directly use in breadboard.