Top 10 Best Ls Fuel Line Kit

PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line, turbocharger fuel line and other high temperature high pressure applications.. Inner Diameter 516. Outside Diameter 0.465inch. Please measure before purchaseIncludes as shown in the picture.. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 3000 psi. Bursting pressure 10000psi. AN-6 nylon braided high pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances.. PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Safety Features For Your Protection Fuel Hose SizeID 6AN, Length 20FT, Working Temperature -100 to 500 -73C to 260C , Pressure Tolerance 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Includes 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Premium MaterialT7 Aluminum Alloy Nylon PTFE Teflon PTFE has excellent corrosion resistance. Polished and anodized surface provide the bright appearance, corrosion protection and strong strength. It is maintenance free and precision engineered to increase life. Braided gas line Inner diameterInner Diameter 516 inch, outside diameter 0.465inch. Please measure before purchase. Working TemperatureWithstands Operating Temperatures from -76 to 446. Working Pressure 3000 PSI. Can work in environments with large temperature differences. Wide ApplicationThis 6AN 25FT braided PTFE Lined Hose Kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line, turbocharger fuel line and other high temperature high pressure applications. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended.

Wide ApplicationNylon Stainless Steel Braided Rubber fuel line kits are primarily used in EFI LS systems as fuel injection hoses, LS engine exchange and EFI conversion fuel lines, turbine oil feed and boost lines, transmission oil cooler lines, hydrocarbon fuel lines, fuel return lines, steam return lines, vacuum lines, fuel supply lines, turbocharger fuel lines and other high temperature and high pressure applications.. Premium MaterialNylon Stainless Steel Braided Rubber fuel line has excellent corrosion resistance and AN fittings are black anodized to provide corrosion protection and great strength. It is maintenance free and precision designed for extended service life.. Package includes 10pcs 6AN swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6AN Hose adapter fitting,1pcs Quick disconnect male,1pcs way Reaming Tool,6pcs 6ANn hose separator clamp and 6AN braided fuel line Length 20 Feet. Hose ID 0.34. Hose OD 0.543inch.. Operating temperature range -104F to 300F -40C to 148.9C Maximum working pressure 500 psi. Burst pressure 2000psi.. Best ServiceIf you have any questions about our 6AN Nylon Stainless Steel Braided Rubber EFI LS Fuel Injection line Fitting Kit, we will provide you with a refund service. If you have any questions, please contact us in time, we will do our best to serve you..

The Size of 6AN Fuel Line Kit PTFE If you are installing this product for the first time, it is highly recommended to have it installed by a professional. Hose ID 516. Hose OD 0.465inch. Please confirm the size before purchasing. Working Parameter of 6AN PTFE fuel line Maximum Working Pressure psi 3000 psi. Bursting Pressurepsi 10000psi. Working Temperature Range -76 to 446-60 to 230PTFE.. Including 6AN PTFE hose ends6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, 2pcs 6AN to 14NPT hose adapter fitting, 2pcs 6AN to 38 hose adapter fitting, 1pc 6AN to 516 hose adapter fitting, 1 pc AN6 to 38quick disconnect male., 1 x gloves, 1 x wrench and 6AN PTFE Black Nylon Braided fuel line Length 25 Feet.. Application PTFE E85 Nylon Braided 6AN Fuel Line Mostly used in EFI LS system and worked with transmission fluid, coolant, oil, pump gas, diesel, and fuel.. Warranty SINTLY offers a 3-month warranty for the 6AN fuel line kits. Please feel free to contact us via Amazon message..

Fuel Hose kit includes fuel tube and aluminum alloy fitting adapter 6pcs 6AN straight hose end, 2pcs 6AN 45 Degree hose end, 2pcs 6AN to 14NPT hose adapter fitting, 2pcs 6AN to 38 hose adapter fitting, 1pc 6AN to 516 hose adapter fitting, 1 pc AN6 to 38 quick disconnect male and 25Ft 6AN NBR fuel line.Included clamps. Make Life Easy The Fuel Injection Hose are easily enough here to run all the way from your fuel tank to the engine. Mostly used in LS and EfI system, can be worked with petrol, diesel, oil, hydraulic fluid, fuel. Used this on a LS swap, make it easier for the plumbing of fuel system. Excellent Stability The 38 Fuel Hose made of Premium Quality NBR Rubber The hose end AN fittings is made of high strength Aluminum , polished and anodized surface provide the bright appearance, corrosion protection and strong strength. All the fittings feature a reusable spin-lock connector. Safety Features The Rubber fuel transfer hose working pressure psi 217.5-290 psi. Bursting Pressure 3MPA. Fule hose Inner diameter38 inch , outside diameter 58inch. Please measure before purchase.Not recommend E85, methanol. No Worry To Buy Excellently Sealed, no leaking. We offers 3-month after-sale service for the LS Conversion Fuel Line Kit. Any problem you have, contact us directly by amazon message. Please Noted Professional installation and Adjustable AN Wrench is highly recommended.

Premium Material T7 Aluminum Alloy Nylon PTFE Teflon fuel line has excellent corrosion resistance. Polished and anodized surface provide the bright appearance, corrosion protection and strong strength. It is maintenance free and precision engineered to increase life. Braided Gas Lne Diameter6an fuel line inner 516 inch, outside diameter 0.43inch. Please measure before purchase. Working Temperature6AN ptfe fuel line withstands operating Temperatures from-76 to 446 -60 to 230. Maximum Working Pressure 3000 PSI. Can work in environments with large temperature differences. Wide Application This 6AN 20FT braided PTFE Lined Hose Kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line, turbocharger fuel line and other high temperature high pressure applications. The PTFE ls swap fuel line kitrelatively hard, it can't be bend and folding in half. Professional installation is highly recommended.

BETTER KITS 20FT AN6 Fuel line 12pcs PTFE Hose End Fitting 4pcs Quick Disconnect Fitting 6pcs Hose Separator Clamp 2pcs 6AN Male Coupler 1pcs Way Reaming Tool.. SPECIFICATIONS Inner Diameter 516. Outside Diameter 0.465. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 3000psi. Bursting pressure 10000psi.. EFFECTIVELY PTFE fuel line can be compatible with all automotive fuelslubricantscoolant. Mostly used in EFI LS system and used as fuel injection hose, ls engine swap, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, vapor return line, etc.. MATERIAL The 6an fuel line kits made of more corrosion-resistant nylon Stainless Steel Braided PTFE Synthetic Rubber The fitting made of T6061 Aluminum. The material of union adapter is lightweight aluminum.. SERVICE 6AN PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended. If you have any questions, please contact with us, we are in 24 hours service.

1.Constructed of Premium Material The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced.. 2.Wide ApplicationThe 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance.. 3.Operating Temperature Can Even Use it at -76Min or 446Max -60 to 230. Maximum Working Pressurepsi 3000psi. Bursting Pressurepsi 10000psi. PTFE tube fuel hose length 25Ft, inner diameter 0.3inch 8mm, outside diameter 0.47inch 12mm . Please make sure the dimension, pressure and temperature range before purchase. 4.Package Included 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 38 hose adapter fitting, 2pcs 6AN to 14NPT hose adapter fitting , 1pc AN6 to 38quick disconnect male, 1pc 6AN to 516 hose adapter fitting.. 5.Professional installation recommended PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..