Top 10 Best Magnetic Build Plate

Spring steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.. Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference. If you do not receive instrucstions coming with the product, please refer to the last 2 pictures we listed on the product webpage which contains instructions in details. Any other questions or issues about the product please feel free to contact us.. The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabshandles make it easier to remove the steel plate from the magnetic base.. Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.. The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time..

ATTENTION BEFORE USEFirstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.. ALL NEW FUNCTIONALITY Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.. EASY MODEL REMOVAL The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.. CUSTOMIZABLE The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. SIMPLE INSTALLATION UNIVERSAL Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds..

Compatible with Ender 3, Ender 3 Pro, Ender 3X, Ender 3 V2, Ender 5 ,Ender 5 Pro ,CR 20 Pro. Aquila X2.. Size 235mm x 235mm.. Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming, Magnetic base with strong magnetism. Easy to install, easy to remove the models by bending or popping it off. No more tape, no more glue, no more shovel, and release your printing anxiety.

Quality AssuranceMade of high-quality spring steel, the flexible Steel spring Sheet won't kink or warp when flexing. The Soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70C.. Wide ApplicationCompatible with PLA PETG PEEK ABS and any other filaments. 235235mm spring steel sheet 3d printer bed works well with Ender 3 Ender 3 S1 Ender 3 v2 Ender 3 Pro Ender 5 Ender 5 ProCP-01CR-20CR20 Pro and other same sized beds.. Great AdhesionPrint molds onto PC build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety.. Easy Take MoldEasy to remove the prints just take out the build plate surface and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints. Official Creality 3D StoreWe provide professional after-sales support. Please kindly contact usseller via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question..

Applicable 235235mm detachable magnetic 3D printer build surface for Ender 3 Ender 3 Pro Ender 3 V2 Ender 3 V2 New Ender 3 New Ender 3 S13 S1 Professional Ander 5 Pro 3D Printer. Reusable the bed surface can work at 70C, high temperature does not demagnetize,. Easy demoulding flexible soft magnet platform, strong flexibility, can be bent to take the mold, and the mold can be taken out by directly separating the membrane surface.. Easy Installation The build surface comes with an upper magnetic build surface and a lower magnetic adhesive base. Place the lower 3M adhesive surface on top of the normal build plate.. Note Please make sure the bottom and top layer of the soft magnetic sticker are firmly adsorbed before installation. If it doesn't stick, turn it 90 degrees and try again until they are fully absorbed and won't separate..

if you get a wrong size,Please replace it and refund.Size 235mm or 180mm,because has a accident.. Double-sided PEI Flexible Printing bed has double-sided PEI coating, both sides can be use,both side is textured.. When printing is complete, let the spring steel sheet cool down enough to around 40C, then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.. The size of flexible PEI build plate 235235mm9.259.25inch,PEI sheet is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 ProCR-20, CR-20 Pro and similarly sized machines.. Easy to install Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your printing build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing..

Super Convenient This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.. Excellent Performance This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.. Easy to Install Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.. Universal With 235mm x 235mm size, this 3d printer kit is suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials PLA, ABS, TPU, nylon etc.. Note If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints. Please feel free to contact us if you have any problem, we will try our best to help you..

Size PEI 220mmx220mm8.66x8.66 inch for 220mm 3D printers.Noteit is single side, one side is textured.. High quality build plate The custom-designed textured PEI material lets your prints easily adhere to the flexible surface.. Easy to install Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.. When printing is complete, let the plate cool down enough to around 40C, then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.. We have applied PEI on the steel plate by machine, so you don't need to worry about the performance. If you receive the package but find the air bubbles or scratches, they are only on the surface and wont effect printing performance. The PEI is textured, so scratches over time from printing will not show up in your print. The textured surface leaves an eye catching, professional finish to your print..

Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Suitable for Creality Ender 3 Ender 3XEnder 3 ProEnder 3 V2Ender 3 V2 NeoEnder-3 S1Ender-3 S1 ProEnder 5Ender 5 Pro,CR20pro etc.. The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape. No more tape, no more glue, no more shovel, and release your printing anxiety. Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.. When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print..

1 The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.. 2 The Pei Spring Steel 235x235 is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.. 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85. 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.. 5 The size of HICTOP PEI sheet is 235235mm9.259.25inch, it is applicable with Creality 3D printer such as Ender-3 ProNeo, Ender-3 V2NeoEnder-3Neo, Ender-5, Ender-5 ProCR-20, CR-20 Pro and similarly sized machines..