Top 10 Best Matterhackers Nylonx

Incredible Strong We use a new formula to improve its rigidity and print performance 75 nylon coupled with 25 carbon fiber, which is ready to take on your next project. With no less than 20 Nylon based carbon fiber SainSmart CF20 is Easy to print, with great surface finish and strength to take on some of your most demanding jobs.. Lower Shrink Rate It features with lower shrink rate, higher strength, and rigidity, less warpage and more resistant to wear and tear compared to the traditional nylon filament.. Smooth Printing Produce high-quality parts that are easy to process and look great all while delivering functionality, stiffness, dimensional stability and heat resistance in an easy to print material.. Application It is suitable for those looking to make both strong and flexible industrial parts, prosthetics, medical equipment, and complex costumes, etc. Optimal print temperatures of 240-260 with a build surface temperature of 80-90make it a great choice for professional and home 3D printers.. Tips Carbon Fiber is abrasive and in general, these fibers will rapidly accelerate the nozzle-wear of brass nozzles. It is highly recommended that you use nozzles made from Stainless steel or other hardened alloys. For better layer adhesion and strength, a constant ambient temperature is needed, we recommended you to print in a enclosure or with an enclosed printer to get the best result..

Material Carbon fiber Polycarbonate - Color Black - Weight 1 KG approximately 2.20 lbs Spool. Size 1.75mm Tolerance Level 0.03mm - Spool Diameter 7.87 - Spool Width 2.83 - Spool Hub Hole Diameter 2.20. Recommended Printing TempNozzle Temperature 240-260C 464-500F, Base Plate Temperature 80-100C176-212F. Performance Advantages PRILINE Carbon fiber Polycarbonate filament has perfect dimensional stability for warp free printing, excellent layer adhesion, and easy support removal.

Heat Resistance Carbon Fiber Filled Nylon80 Nylon Coupled with 20 Carbon Fiber, which makes it has higher rigidity and strength than normal nylon filament. Good Toughness. Wear Resistance and Tear Resistance. High Precision Low Shrinkage. Creep Resistance and less warpage. Heat Resistance 120C. Flame Retardance UL94-V2. Matte Printed Surface.. Clog-free Bubble-Free Less-tangleFull mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping.eSUN Carbon Fiber Filled Nylon filament is orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.It does not overlap or tangle,no cracking.. Wide ApplicationCompatible with most of FDM 3D Printers that use 1.75MM filament and suitable for making both strong and flexible industrial parts, prosthetics, medical equipment and complex costumes etc.Recommend Carbon Fiber Nylon filament extrusion Nozzle temperature 260-290, bed 45-60.Due to its unique attribute of abrasiveness, we recommend to use a 0.6mm or larger stainless steel nozzle instead of regular soft metal nozzles.. Stable Dimensional Tolerance3D printer filaments are produced with high precise specification and have a tolerance of only - 0.05mm. Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance.Minimum tolerance and low warping to ensure consistent feeding and stable prints.. 100 Vacuumed Sealed PackagingComplete drying for 24 hours before packaging, eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and prevent from dust and foreign particles, avoid nozzle jams and yield smooth 3D models.PLEASE NOTICE THAT THE SPOOL IS NON-DETACHABLE.

500 Gram Spool. 1.75mm Filament Diameter. Carbon Fiber Nylon. Extruder 240-270C. CarbonX CFR Nylon exhibits improved layer bonding at higher temperatures.. Bed Temp 80 - 100C.

Say Goodbye to Poor 3D Printing by Wet FilamentWet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.. Personalized Temperature SettingThe user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 3555. Suitable for more than 20 kinds of 3d printing filament commonly used in the market. Personalized Drying Time Setting The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 024 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.. Compatible with 99 of 3D Filament SpoolsA Maximum capacity of SUNLU dry box is 21085Hmm. B Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc. C Works perfectly with all standard filament diameters 1.75mm2.85mm3.00mm.. User-friendly Design1 Year Guaranteed After-Sales Service A The design of two rollers inside the box allows you to print while drying B 2 inch large screen LCD monitor, can display temperature and time clearly and brightly C Ultra quiet design, less than 10db while operating, no disturbing of your life and work D Exquisite packaging design- best gift Come on to buy one to present to your friends who love 3D printing.

Strong Tough - PolyMide CoPA Nylon filament 1.75 is made with Nylon 6 and Nylon 6.6 PA filament, which ensures outstanding mechanical strength and toughness, making it the best choice of engineering material for your creative ideas. Warp Free - Polymaker CoPA Nylon filament 1.75mm is engineered to give excellent dimensional stability during printing, with near-zero warping. Easy Printing - Unlike other Nylon filaments, our CoPA Nylon 3D printer filament 1.75 is extremely easy to work with and compatible with most filament-based 3D printers with no heated chamberbed required. 180 Heat Resistant - With a best heat resistant performance180 Vicat Softening Temperature in the market, our PolyMide CoPA Nylon 3D printing filament 1.75mm is a no brainer for very demanding mechanical parts such as gears, brackets or pipe connectors. Tangle Free Resealable Bag - Our CoPA white nylon filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue. Printing Settings - Nozzle 250 270 Bed 25 50 Speed 30mms 60mms Annealing 80 for 6h To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide CoPA 3D print model Bed Surface Glass with glue PVA glue is always required for better adhesion. Note - We recommend to switch to a abrasion resistant nozzle such as hardened steel nozzle. PolyMide CoPA 3D Filament is a very stiff filament so it is required to have a good set up to ensure a good feeding avoiding excessive bending in the filament guide system. It's ultra critical to have your filament enclosed in a dessicant box while printing, put you filament back to the resealable bag when not using it, and keep your nozzles clean between every 8 prints or so. RISK FREE LIFETIME TECHNICAL SUPPORT - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need.

DRYER STORAGE BOXthe dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Sealed protection, comprehensive dust-proof and damp, no impurities. ADJUSTABLE TEMPERATURE HUMIDITY MONITORadjustable heating temperature to accommodate needs of various filaments, actual and setting temp are displayed on the LCD indicator. NOTE A76LR44 button battery ALREADY included The default time is 6hrs, while you can also reset from 0-24hrs up to 70 or even infinite heating time regarding your needs. Equipped with individual humidity sensor, measurement range from 10-99, real-time data will be indicated by the LCD monitor. COMPATIBLE WITH MULTIPLE SPOOLSworks for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PETG, TPU, Wood, ABS, etc. Extra large space allows usage 4 rolls of 0.5kg filaments, 2 rolls of 1kg filaments, 1 roll of 3kg filament at the same time, with two built-in rotating shafts that allow the filament to continuously rotate in a dry hot box to remove moistureNote for Single Large Spool-217x174mm, Dual Small Spools 217x80mmHW. REVIVE YOUR BRITTLE FILAMENTfilament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily. 100W PTC HEATER BUILT-IN FANdifferent from applying ordinary heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture.

Premium PETG Filament TECBEARS PETG 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects. 100 made of environment-friendly natural materials, harmless to users and the environment.. Clog-free Bubble-Free Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the PETG filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance.. Less-tangle Wide Compatibility Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc.. Dimensional Accuracy Consistency Advanced CCD diameter measuring and self-adaptive control system in the manufacturing ensure strict tolerances. Diameter 1.75mm, dimensional accuracy - 0.02 mm without any exaggeration 1 kg spool 2.2lbs. Printing Tips Recommended ExtrusionNozzle Temperature 220C - 250C, Bed 70C - 80C.It will be your risk-free choice, please be assured that well always stand behind our products..

Investment Casting with PolyCast - PolyCast moldlay filament 1.75mm is an entirely new 3D printer filament designed to produce investment patterns for investment casting applications. 3D printing significantly cuts down both the cost and lead time by eliminating the tooling process. Polishability - Compatible with Polymakers Layer-Free technology, delivering superior surface quality while minimizing the need for post-processing after casting. No Ash - PolyCast metal casting plaster 3D printing filament burns off cleanly without any residue, enabling defect-free metal parts. Excellent Printability - PolyCast machinable wax filament 1.75mm can be used on any FDMFFF printer with excellent printability. Tangle Free Moisture Free - Polymaker Poly Cast filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue. Printing Settings - Nozzle 190C - 220C Bed 25C - 70C Speed 40mms - 60mms Fan On. Risk Free Lifetime Technical Support - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need.

Country Of Origin United States. Model Number MP06572. Item Package Dimension 18.0 L x 10.0 W x 10.0 H. Item Package Weight 20.0 lb.