Click here to learn more about these products.
Moeller Marine Electric Universal Fuel Tank Sending Unit (4" to 27" Deep Tanks, 35 to 240 Ohm's)
Calibrated to the Industry Standard of 33-240 Ohms. Requires connection to a dash mounted gauge. Internal components will not rust or corrode. Complete with 5 hole gasket and screws. Turn screw assembly in 90 increments until float arm is situated to clear tank wall. Push mounting flange back onto center square.
Moeller Marine Products Electrical Reed Switch Fuel Sending Unit (13" Deep Tanks)
This is a 12 sending unit for the tank depth of 13.. The sending is always 1 shorter than the tank depth, the float will float and give an accurate reading on the gauge. Included Components 12 Rssu Tank Depth 13. Sport Type Boating.
Moeller Marine Mechanical Fuel Tank Sender (14" Deep Tanks)
All swing arm readings are subject to fuel-slosh fluctuations.
Moeller Sender-Reed SS Electrical 8 in
Moeller Reed Switch Sending Unit Requires Dash Mounted Gauge. Reed Switch Sending Units collect fuel level information more consistently than swingarm senders. They achieve this by taking the measurement from the float-which is still a moving part. However, the fluctuation is much less because the range of motion is much less. Durable 316 Type, Stainless Steel construction provides efficient performance.. Designed for use in gasoline applications Calibrated to 33 to 240 Ohms. 7 INCH LENGTH FOR 8 INCH TANK DEPTH.
Moeller Marine 032525, Below Deck Permanent Fuel Tank, 25 Gallon - 47.00 in. L x 18.03 in. W x 10.25 in. H, One
Bracket Tie Down 300110, Fuel Pick Up 1, Diesel Return No, Sender Swing Arm A002074, Belly Tank No. Machined aluminum 38 in. withdrawl fitting with 360 swivel poplock for hook-up convenience. Ethanol and biodiesel-corrosion and pit-resistant. Complete with molded fill neck and withdrawal vent fittings molded directly into the shell. ABYC-compliant fittings with seamless connections to rigid low-perm hoses. UV rating of 8, temperature rating of -40F to 176F. Sport type Boating.
Moeller Marine 031626, Topside Fuel Tank, 22 Gallon, 83 Liter, White
International top side tank and for boats built before 2011. Dimensions 29.25 in. L x 19.00 in. W x 13.58 in. H measured with cap, Cap - 305194. Rotationally molded, cross-linked poly construction with UV-stabilized resin, suitable for topside mounting. Designed for today's highly corrosive ethanol fuels, looks and performs better than any other fuel tank in the business, conforms to all ABYC, NMMA and U.S. Coast Guard regulations. Tanks were specifically developed for use in Carolina Skiff, Boston Whaler, and Key West bench style, center console, pontoon, deck, and jon boat designs..
SEACHOICE 15461 Marine 6-Inch to 12-Inch Gas or Diesel Fuel Electric Sending Unit Kit
Provides accurate fuel level information. Suitable Tank Depth 6 to 12 inches. Can be used for gas or diesel. Compatible with 35 to 240 ohm gauges. Includes mounting screws and gasket.
KUS USA Reed Switch Diesel Fuel Water Level Sensor, Standard American Output 240-30 ohm, SSS SSL, Includes Mounting Gasket and Screws, 9.5"
SIGNAL OUTPUT Standard American Output, 240 ohm - 30 ohm Empty - Full, Non-Linear Output, 18-21mm Per Step. MOUNTING METHOD SAE 5 Hole Mounting Pattern NOT equidistant . OPERATING 12V24V, -40 F to 185 F -40 C to 85 C. INCLUDED Sending Unit 1 pc, NBR Mounting Gasket 1 pc, 10-24 Hex Screws 5 pcs, Installation Instruction 1 pc. FOR USE IN Diesel, Fuel, Gasoline, Water, OEM Replacement.
Moeller Marine 035728-10, Gasket for Fuel Tank Sending Unit, 5 Hole, Electric and Mechanical
Complete with fine course replacement screws and washers. Designed for top mounting in aluminum, plastic or stainless steel fuel tank on all types of marine vessels. Ethanol compliant. Exceeds current NMMA and ABYC specifications. Calibrated to the Industry Standard of 33-240 Ohms.
Fuel Sending Unit 240-33 ohms 5"(130mm) Marine for Boat RV Truck Vehicle Fuel Gas Sender Fuel Tank Sending Unit Fuel Water Level Sensor Fuel Level Sending Unit Boat Fuel Gauge Sending Unit
b100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed SwitchImported from Japan. It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. b br Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.br. The FuleWater Level Sensor with American standard output 240-33 ohms 240 ohms at empty, 33 ohms at full. If you Need Lengths Other than 4-24, Please Contact us Directly for More Information.br. Easy to Install The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions The Wiring Instructions are Straight Forward and Easy to follow. br. bSAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. b bWide Application It Could Support Fuel Level Gauge and Water Level Gauge for BoatAuto.bbr. b 100Tech Guarantees with 1 Year Limited Warranty Free Lifetime Technical Support brbAttention To Allow the Fule Sender not Hit the Bottom of the Tank, Please Measure from the Top of Your Tank to the Bottom on the Outside and Subtract 1 Inch the Length of Sender.b br. The Size of Float The Diameter of Float is b1.3835mm.b If You Have to Drill the hole, Diameter b1.5038mmb Hole Would be Perfect..
Best Choice
Best Value
