Top 10 Best Network Toner And Probe Kit

Includes a professional grade analog tone generator and tracing probe for open-ended, non-energized wiring. Toner-Pro features 5 distinct tone cadences, transmits 1,000 feet. Rugged Angled Bed of Nails ABN clips securely attach to wires. RJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair. Toner-Pro tests for continuity and polarity with results indicated by clearly labeled LEDs. Probe-Pro features 3.5 mm headphone jack for noisy environments headphones not included. Responsive probe with durable non-metallic, replaceable conductive tip VDV999-068 - sold separately.

Tone and trace wire on non active networks SmartTone technology provides 5 distinct tones for exact pair identification Battery 9 volt alkaline. Sends a loud tone up to 16 kilometer 10 miles in most cables and provides 5 distinct cadences for isolating individual wire pairs. Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip. Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack. Push button switch selects Solid, Alt and Off.

Simple analog tone generator and wire tracing probe for open-ended non-active wire runs. Responsive probe with durable, non-metallic, conductive tip. Alligator clips for unterminated wires. RJ45 to RJ45 test cable. Toner and probe together perform pin to pin wire map test.

Copper cable verifier kit for testing voicedatavideo with integrated RJ11, RJ45, and coax cable, test ports support low voltage testing with no need for adapters, ensures high quality installations and expedites cable problem resolution in active network environments. Includes MicroScanner2 cable verifier with detachable wire map adapter, IntelliTone 200 Digital Probe, patch cords, remote IDs, alligator clips, user guide, 2 AA and 1 9V alkaline battery, accessory pouch, duffel bag, 1 year warranty. Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, shows 4 test modes at once Graphical wire map, pair lengths, distance to fault with TDR, cable ID, and far end device, detects 101001000 Ethernet, POTS, and PoE. Cable tests include length 460 meter or 1500 feet with resolution to 0.3 meter or 1 foot, wire map to TIA 568AB standards, remote ID locators. Coax F connector for 75 ohm, 50 ohm, 93 ohm cables, PoE Detection Solicits and detects the presence of 802.3af compatible PoE Power over Ethernet devices to rule out power as source of problems. Rugged housing with integrated rubber easy grip holster and magnetic strap, locates virtually any cable or wire pair with IntelliTone digital and analog toning.

IntelliTone digital toning eliminates noise and false signals. SmartTone analog toning precisely isolates individual wire pairs. Locates cables safely and effectively on active networks. Verifies twisted pair installation with visual end to end continuity test. Probe detects digital signal and 1 kilo hertz signal from the analog toner. Probe has built in pair tester to identify open, shorted and crossed pairs. Signal strength indicator LEDs so you can help identify 1 cable that is bundled with other cables. Confirms cable location, verifies cable continuity, and detects cable faults opens, shorts, and reversed pairs in 1 step.

Easy to operate and smooth appearance.It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip.. Fast to locate the breakpoint without wire's cover damage, Find wire on all types of connected operating Ethernet switch RouterPC terminal. Perfect for tracking RJ11, RJ45, cables or other metal wire via adapterAnd also with the Battery10V-110V positive and negative measurements function. There will be a portable toolkit sent togrther with the cable tester,very small and easy to carry to anywhere you want to go.. Light touch switch,saving energy and power.Select SCAN, the STATUS indicator and the VERIFY indicator will flash at the same time when the cell voltage is below 6V. It will automatically switch off while not using, which can prolong the service life of the cell to more than 50 hours.. Headset to fit the noisy environment.In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of beep beep sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating..

Product 1 Cable tester tests voice RJ1112, data RJ45 and video coax F-connector terminated cables with clearly defined results. Product 1 Measure cable length up to 2000 feet 610 m. Product 1 Test for Open, Short, Miswire or Split-Pair faults. Product 1 Backlit LCD screen displays cable length, wiremap, cable ID and test results. Product 2 Includes a professional grade tone generator and tracing probe for non-energized wiring. Product 2 Toner-Pro features 5 distinct tone cadences, transmits 1,000 feet. Product 2 Rugged Angled Bed of Nails ABN clips securely attach to wires. Product 2 RJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair.

High QualityThis tone generator and probe kit is made of high-quality materials, wear-resistant, corrosion-resistant. The gain is normal 30dB, the input impedance is nominal 100M Ohm, and please note that the wire tracker needs two 9V batteriesNOT INCLUDED.. Accurate EasyWith optional continuous or adjustable generator, the cable toner is simple and the test results are accurate.One button operation. Clip and trace, 1 second to identify cables. Convenient to carry and storage the cable tracer with carrying bag, and protect it from demage, makes it durable.. Powerful Professional When used in conjunction with any tone generator, professional wire toner probe kit with adjustable volume is designed to identify and trace wires or cables within a group without damaging the insulation. For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement.. Safety in UseWire toner tracer has spring-loaded ONOFF button adjustable volume sensitivity control recessed terminal ports for handset connection resistive plastic carbon-fiber tip prevents accidental shorts when probing wires. Insulation probe and built-in loudspeaker can effectively avoid short circuits of conductor and make the network toner and probe kit safer to use.. Widely ApplicationThis cable sniffer are widely used in the maintenance of cables and wires. The measurement area includes line tracking, short circuit test, clearbusyringing identification. Selectable continuous or variable tone generater..

Cable tester locates, tests and measures coaxial, data RJ45 and telephone RJ11 cables. Identify wiring faults including miswire, open fault, short fault, split-pair, wire map. Detect, identify and test Power over Ethernet PoE. Measure cable length and distance-to-fault with Time Domain Reflectometry TDR technology. Four tone options with probe included. Measure paired-conductor cables up to 1500-Foot 457 m with accuracy of up to -5-Percent and 1-Foot0.3 m. Single-end cable testing or complete two-end cable testing with Test-n-Map ID Remote.

Pro3000 analog tone generator and probe plus accessories for testing, troubleshooting, and terminating wiring in telephone and data lines. Tone generator and probe locate and trace cables, wires, and wire pairs, and check continuity and polarity on inactive networks. ABN clips allow access to individual wire pairs and RJ11 plug connects to telephone jacks. Sends a loud tone up to 16 kilometer 10 miles in most cables and provides 5 distinct cadences for isolating individual wire pairs. Kit includes a punch down, cut blade, cable stripper, probe pic, and D snips for separating, cutting, and terminating wiring, and a standard 4 wire modular adapter for connecting to telephone jacks.