Top 10 Best Nfc Writer

It not only supports Mifare cards and Class A and B cards conforming to the ISO 14443 standard, but also supports NFC and FeliCa contactless technology.. This is a USB hot-pluggable device that complies with the CCID standard and is ideal for applications such as personal identity security authentication and online micropayments.. This is a USB full-speed device 12 Mbps, which reads NFC tags at 106 kbps212 Kbps and 242 Kbps, allowing faster read and write speeds and higher efficiency. To increase the safety factor, you can choose to configure an ISO7816-3 compliant SAM card slot in the ACR122.. Widely used in areas such as access control, electronic payment, bus e-ticketing, highway toll collection systems, network verification, logistics, and supply chain management..

SUPPORT 10 FREQUENCYID-125KHz,ID-250KHz,ID-375KHz,ID-500KHz, ID-625KHz,ID-750KHz, ID-875KHz,ID-1000KHZ,IC13.56MHzISO1443AB,HID125kHz Prox cards.. The software of our machine is only compatible with Windows system, not working with MAC system or Linux system.. Support readEM4100EM4200,Mifare classic,UID cards,Ultralight,Ntag203,138613261346Support cards write 138613261346,T5577,EM4305,Mifare UID cards.. It can crack 13.56mHz encryption cards.This device only supports partial sector encryption IC card, does not support all sectors encryption IC card.If your card is all sectors encryption,the device will show Decoding fails, please try to decode an upgraded versionCome with decoding software working on Windows.To crack a encryption card ,you need to connect the reade to a PC.. NOTEIt doesn't work for fully-encrypted cards. By its decoding software, it may work for most half-encrypted cards, but not all.We hope you can confirm with us whether it can work for you through QA before purchasing..

USB-C Connector. ISO 14443 Type A and B Contactless Cards, MIFARE Cards, FeliCa, ISO 18092 NFC, and ISO 15693 Cards. Smart Card readerwriter mode. Card emulation mode. Keyboard emulation mode.

USB 2.0 Full Speed Interface. NFC Support NFC ReaderWriter Mode, Peer-to-Peer Mode, Card Emulation Mode. Supports ISO 14443, MIFARE, FeliCa, and all 4 types of NFC ISOIEC 18092 tags.

1,Not compatible for iClass ,awid , Indala and Keri cards. 2,Support read write Frequency ID 125KHz,ID 250KHz, ID500KHz, ID375KHz,ID625khz,ID 750kHz,ID 875KHz, ID1000KHZ, IC13.56MHzISO1443AB,HID125kHz Prox cards.. 3,Support readEM4100EM4200,Mifare classic,UID cards,Ultralight,Ntag203,138613261346Support cards write 138613261346,T5577,EM4305,Mifare UID cards.. 4,The software of our machine is only compatible with Windows system, not working with MAC system or Linux system.. 5,The applicability of our reader is limited, it cannot match all types of FRID cards. Please read our product description carefully. If your card is not the type listed by us, or if you dont know the type of your card, please do not buy it, or you can consult us. Thanks.

BEFORE PURCHASINGThe compatibility of our reader is limited, If your card is not the type listed by us, or if you dont know whether you can use it, please contact me before purchase. The sensing area is on the back of the device. Different types of cards have slightly different sensing positions. If you cannot read them, please adjust the position and try again.. MATCH VARIOUS TYPES OF CARDSCompatible with ISO 14443 A cards, EM card, Mi-fare classic, AWID card, T5577 card, Ntag 213215216, etc. This device can only work for part of 125KHz HID cards, If you just want to use it to read your HID card, please consider carefully.. SUPPORT READ AND WRITE 10 FREQUENCIESSupport 125KHz, 250KHz, 375KHz, 500KHz, 625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz ISO1443AB, etc.. CRACK ENCRYPTED CARDOur reader can crack most of 13.56MHz encryption cards. Please ensure that this operation must connect the reader to the computer.. SMART DISPLAY SCREEN AND USB INTERFACEHD 2.8 inch full color screen, clear display and voice broadcast. It can be used by installing battery or connecting the device or charger with the USB cable..

acr122u nfc reader writer. 13.56 Mhh support mifare 1k, ntag213, ultralight ultralightc, Mifare plus, Mifare desfire. provide SDK and free nfc tool software. 5 pcs ntag213 nfc tag samples and 2 pcs UID MF1 card. IEC14443A and ISO18092 protocol compliance.

This product does not come with any software. You need applications provided by third parties.. Built-in antenna for contactless tag access, with card reading distance of up to 50 mm depending on tag type. Supports ISO 14443 Type A and B cards, MIFARE, FeliCa, and all 4 types of NFC ISOIEC 18092 tags.

NFC reader RFID reader writer S9-BU-13-00 with USBplugplay interface. RIFD reader writer support read write contactless cards MIFARE Classic S50S70 ,MIFARE DESFire, MIFARE ProMIFARE Ultralight,etc.but it doesn't support to write the BANK CARD or HID card. smart card reader writer also support read write ISO7816 contact cards like sle4442,44428,5542 cards.Not support read 125khz ID card or HID card.. Very Important PointS9 reader is not support all RFID cards,tags.before place the order,please refer to the SDK first.For any technical question or any technical error occured,please contact us by message or email before leaving feedback. this S9 reader also doesn't support any other third party application software,customer should develop the software according to our SDK.. Extral serviceif need the reader function just to read card UID like use keyboard emulation output format,please contact us to get the firmware to update the device.For bulk order ,we will give the best price.stock are aways available..

Working frequency 125KHz 13.56 MHz, support IC ID dual frequency replication, support NFC tags.. Read and write ordinary 125KHz RFID card1. Place the card on the card reader and press Read EMID on the software to scan the card.2. The software will scan and display the card number.3. Place a writable 125KHz writable chip on the card reader, and press 'Write EMID' on the software.. Read and write 13.56MHz IC, IC semi-encryption card, IC full encryption card1. Place the card on the card reader, press Read on the software to start decryption.2. indicates successful decryption, and X indicates failure.3. After the decryption is successful, the software displays the card number.4. Put a writable 13.56MHz writable chip on the card reader, and press 'Write Type-A' on the software.. Efficient high-speed USB 1.2 meters length USB transmission line connected to the device, respond immediately, no need to install a driver, quickly read the card number.. Obtain the software When you connect this product to a computer, you can find the software on the computer. If it doesn't displayed on your computer, you can also ask me for the software link..