Top 10 Best Outerimpact Red Dot Adapter

This mounting plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 2245 pistol. For Mark I and II, confirm it has drilledtapped holes. Plate will not work without holes.. Mounting hardware comes with screws and allen wrench. For Mark I and II, confirm it has drilledtapped holes. Plate will not work without holes.. Also fit Doctor, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots.. Mounting hardware comes with screws and allen wrench. We are learning that depending on the date of production batches of the ruger mark series, some pre-drilled holes are slightly shortershallower. If so, please contact us, we will send you shorter screws. We are in the process of adding shorter screws, but it is not factory included til next production.. This optic plate is designed to attach to the two existing holes on the top of Ruger Mark Slide. No need to replace the rear sight and allowing user to co-witness the rear sight..

New design in 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XDM, XDS Pistol. Does not fit 5.25 XDM competition series. It is design to for Springfield Non-OSPNon Optics Ready XDXDSXDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25 XDM competition series. This new plate is an re-designed version to replace the old E1E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.. Fit Ade RD3-006AHuracan, RD3-006BCobra, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.. There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.. Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement..

This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint PlateSlide seamlessly.. The onoff switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.. Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.. Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.. If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability 99 that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.. ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cutoptic plate that is compatible with shield RMSRMSCDeltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cutoptic plate that is compatible with Trijicon RMRcc footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cutoptic plate that is compatible with Trijicon RMRSROHolosun 407C507C footprint.

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSRO red dots.. Compatible with Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. Finished in a Matte Black Anodize. Comes with two screws to connect this ADE optic plate to Trijicon RMR..

This brand new designed optic mounting plate made by ADE is to REPLACE the rear sight of certain Steyr A1 and A2 Handgun.. This Optic Plate is Compatible with S-A1 C-A1 M-A1 L-A1 M9-A1, L9-A2, C9-A2, M9-A2. Does NOT fit any other models that is not listed here.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..

This Optic mount is designed to connect certain red dot optics to 1911 pistols with Novakdoes NOT fit Novak OVERSIZE rear sight cut. One of the advantage of this ADE plate over others is this optic plate has a CURVEDCONCAVED design that will sit flushwrap the top curved pistol slide on the top of the pistol. Many other plates are Flat design.. 1911s have several different rear sight dovetail cuts, such as ColtG.I. Standard, LPA, Novak standardtraditional and Novak Oversize rear sight. This ADE Optic Plate made by ADE is for Novak Standardtraditional rear sight ONLY. It does NOT fit any 1911 that does NOT has a traditional Novak rear sight. Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s.. Does NOT fit any Novak cut that is NOT GENUINEtraditionaltrue Novak rear sight cut, such as some Taurus 1911 and some Ruger 1911 who use Licensed Novak rear sight but created their own sizes cut.While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark MinishotCoreshot, Crimson Trace CTS-12001300 and similar red dots. Does NOT fit Trijicon RMR, DeltaPoint Pro, Shield type red dot footprint.. Installation screws are included for working with Vortex Venom, Burris Fastfire and ADE RD3. The screws provided might be too shorttoo long for some red dots that match the same footprintscrew hole of this plate, such as sightmark Mini Shot M Spec. We recommend going to a local hardware store such as ACE Hardware to get the right size. Please be prepared to purchase longershorter screw separately for other red dots brands such as Sightmark, Meopta, Doctor, Bushnell..

Compatible Guns All models except MOS versions. Compatible Red Dot Sights Mounting Screws INCLUDED Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 3, CMORE RTS STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS additional screw purchase required, Holosun 407507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1267. Material Billet 7075-T6 aluminum.. Finish Black Anodize. Dimensions  Length  2.02 Width 1.06 Height 0.13.

Compatible Guns XD MOD.2, XD, XDM does not work with 5.25 competition series model or the Elite, XDS and MOD.2, Hellcat does not work with the OSP version. Compatible Red Dot Sights Mounting Screws INCLUDED Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 3, CMORE RTS STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS additional screw purchase required, Holosun 407507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1269. Material Billet 7075-T6 aluminum.. Finish Black Anodize. Dimensions  Length  2.02 Width 1.06 Height 0.13.

Compatible Guns P365. DOES NOT WORK WITH P365XL. Compatible Red Dot Sights Mounting Screws INCLUDED Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 3, CMORE RTS STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS additional screw purchase required, Holosun 407507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1275. Material Billet 7075-T6 aluminum.. Finish Black Anodize. Dimensions Length  2.15 Width 1.06 Height 0.21.

Compatible Guns MP Shield 380 EZ Pistol including the Performance Center, but not the CORE and MP Shield 9mm EZ Pistol including the Performance Center, but not the CORE. Compatible Red Dot Sights Mounting Screws INCLUDED Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 3, CMORE RTS STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS additional screw purchase required, Holosun 407507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1251. Material Billet 7075-T6 aluminum.. Finish Black Anodize. Dimensions  Length  2.170, Width 1.06, Height 0.14.

Compatible Guns All Glock models except MOS verions. Material Billet 7075-T6 aluminum.. Compatible Red Dot Sights Mounting Screws INCLUDED Holosun 407k507k, Sig Romeo Zero, Shield RMSc, Swampfox Sentinel, JPoint, Crimson Trace 1550. Coating Anodize -- Finish Black Anodize. Mounting Hardware 2 6-48 Weaver T-10 Torx Head screws. 2 M3 x 8mm Flat Head Screws. 2 M3 x 6mm Socket Head Cap Screws. 2 M3x8mm Socket Head Cap Screws. 2 M3 X 10mm Flat Head Screws..

Compatible Guns Sig SauerP320-X5, X-Carry IF IT DOES NOT HAVE THE LOADED CHAMBER INDICATOR. Please see our M17 adapter if your X-Carry has a loaded chamber indicator. DOES NOT WORK WITh X-VTAC, or X5 LEGION.. Compatible Red Dot Sights Mounting Screws INCLUDED Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 3, CMORE RTS STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS additional screw purchase required, Holosun 407507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1273. Material Billet 7075-T6 aluminum.. Finish Black Anodize. Dimensions Length  2.2 Width 1.06 Height 0.13.

Compatible With Smith Wesson MP, MP Shield, MP 2.0, MP 2.0 Compact except the .22 version. Material Billet 7075-T6 aluminum.. Compatible Red Dot Sights Mounting Screws INCLUDED Holosun 407k507k, Sig Romeo Zero, Shield RMSc, Swampfox Sentinel, JPoint. Coating Anodize -- Finish Black Anodize. Mounting Hardware 2 6-48 Weaver T-10 Torx Head screws. 2 M3 x 8mm Flat Head Screws. 2 M3 x 6mm Socket Head Cap Screws. 2 M3x8mm Socket Head Cap Screws. 2 M3 X 10mm Flat Head Screws..

Compatible Guns Sig SauerP320-M17 non mil-spec, M18, X-5 Legion, X-Compact. Also compatible with the X-Carry IF IT HAS A LOADED CHAMBER INDICATOR.. Compatible Red Dot Sights Mounting Screws INCLUDED Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 3, CMORE RTS STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS additional screw purchase required, Holosun 407507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1250. Material Billet 7075-T6 aluminum.. Finish Black Anodize. Dimensions Length 2.0 Width 1.06 Height 0.12.