Top 10 Best Pcie Sata

You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card.. 4 Ports Adapter Card --- You could add 4 6Gbs SATA 3.0 devices to your computer with this PCIe SATA card.. Chipset --- With using The Marvell 88SE9215 chip,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported.. For All PCs --- with a low profile Bracket and 4 SATA Cablecompatible with 99 size chassis on the market.. System Support --- Connect 4 large capacity storage devices at the same time. Compatible with Windows XP 2003 7 8 10 MAC NAS Linux OS..

Efficient - You could add four 6Gbpss SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbpss and 3 Gbpss. High Performance - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported. Support System - The SATA expansion card supports Windows XP 7 8 10 Mac NAS Linux OS, no driver required. Support install Windows OS from Win10 PE. For All PCs - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1 X4 X8 X16 slot. Please Note - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.

1.The PCE-G2S4 PCIE to 4-Ports NONE-RAID SATA III 6Gbps card will allow users add 4X SATA III ports on desktop PCs, servers, and NAS system for HDDSSD storage expansion or boot use.. 2.Based on ASMedia ASM1061SATA III Serial ATA advantage HCI controller and ASMedia ASM1093 SATA port multiplier. Provide 4X SATA III 6Gbps ports for PCs and Servers.. 3.This model support Windows system only,install the driver before add the SSDHDD in system... 4.Complies with Serial ATA Revision 3.0. Support SATA III speed 6Gbps, SATA II speed 3Gbps, SATA 1 speed 1.5Gbps. PCE-G2S4 was set default mode on AHCI, it also supports IDE mode or none boot mode. Users can push the mode selector on the mode they need.. 5.PCIE Gen 2 X1 interface design, will works on PCIE X1, X2, X4, X8, X16 slot. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase..

2 Port SATA 3.0support AHCI 1.0 mode and IDE mode, bus interface PCI-Express x1 slot, expansion interface 2 SATA 3.0 interfaces. Support system Win10 Win8 Win7 WinXP VistaLinux.System requirements There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16. Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps of communication speed. Support hot swap, plug and play, easy to use.. Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0, SATA1.0, conform to PCI-Express v2.0 specification, and backward compatible with PCI-Express v1.0..

1.The FS-S4-Pro is a PCI express 3.0 X1 interface to 4-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 4X Non-Raid SATA 3.0 Storage or AHCI Boot HDDSSD on desktop PCs, Servers, MAC Pro and Network Attached Storage NAS.. 2.Select the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage.. 3. Plug and Play on Windows Server 2019,2016,2012R2,2012,2008R2,2008,2003R2,20033264, Windows XP, Vista,7,8.x,103264bit, MAC OS 10.4.x,10.5.x,10.6.x,10.7.x,10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems.. 4.Compliant with Serial ATASATA Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on PCIE X1, X2, X4, X8, X16 slot.. 5.Warning 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit PSU can provide 4X max SATA interface power supply for HDDSSD.3. Users must make sure PCsMotherboards have at least one PCIE slot before purchase.4. Slim PCs need user change to low profile bracket..

8 Ports Integrated on One SATA Card With SupaHub 8 port PCIe SATA card, you are able to add 8 SATA III 6Gbs drives for your desktop. Lenovo and Dell computers block the BIOS interface of any third-party SATA Controller, it may lead to unpredictable compatibility issues or the SATA card can not be read. Lenovo and Dell computer users should be careful when placing an order for SATA controller card.. Built-in Marvell 88SE9215 JMicron JMB5xx chip, the stability and compatibility of this PCIe to SATA card have been improved. This PCIe SATA card does not support RAID.. Supports Windows 7810. Driver installation is required to avoid issues like not all ports working won't power up slot empty. Multiple hard drives requires sufficient power so that to avoid drop channel not working an so on. Using multiple OS only supports Windows. You must turn off the power before pluging the SATA PCIe card into motherboard or removing it.. Compliant with PCI-Express v2.0 specifications, backward compatible with PCI-Express v1.0. For higher speed, motherboard needs to be PCIe 2.0GEN2, fastest speed 380-450 MBs or above, plug the 8 port SATA PCIe card into x16 slot. Old motherboard x16 slot probably reach PCIe 2.0 speed, but other slotsx148 not. Fastest PCIe 1.0 GEN1 speed with is 200-300 MBs. Actual speed depends on PCIe bandwidth of motherboard. If all ports are used at the same time, the speed will be slow down.. PCIe x1 interface This SATA expansion card 8 Port is compatible with PCIe x1, x4, x8, x16, not compatible with PCI slot. PRODUCT AFTER-SALES i If the product is damaged during delivery, please contact us directly for better response. ii Buyers without CD-ROM, or the CD doesnt work, please contact us for driver download link. iii Please feel free to contact us if you have any question..

Connect five SATA drives to any free PCI-E x4 Slot, providing up to 1700 MBs Speed.. Plug and play supported, No additional software installation or setting required.. Can support port Multiplier that is not in a RAID configuration.. Complies with PCI Express base Specification Revision 3.1a. Compatible with SATA hard drives Solid state drives and computer systems with SATA controllers..

PCIe to SATA 3.0 2 Port Expansion Card with a low profile Bracket and 2 SATA Cable. Built in 2 SATA3.0 interfaces, Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA III at 1.53.0Gbps. Support IDE or AHCI programming interface. Compliant with Serial SATA version 3.0 Compliant with PCI-E 2.0 specification. Connect 2 mass storage devices at the same time. Compatible with Windows XPServer 2003Vista783264 bit10MACLinux OS.

PCIE 1X SATA card 16 ports Provides 16 SATA 3.0 ports and 16 SATA cables, supports simultaneous connection of 16 SATA hard drives, with a transmission speed of up to 6Gbps, and can add 16 SATA 3.0 6Gbps devices to your computer.. Product chip Built-in ASM1064JMB5753 chip, which improves the stability and compatibility of this PCIE to SATA card. This card also has a heat sink for long-lasting high temperature resistance. This PCIE SATA card does not support RAID.. Extensive compatibility Support Windows XP 20037810 3264bit MAC Linux and other operating systems. The PCIE SATA card is compatible with PCIE X1,X4, X8, X16 slots.. Products include PCIE 1X SATA card 16 ports1, SATA cable16, low profile bracket1, driver CD1, product manual1.. Reliable Support Our products have been tested for function and durability, if you have any questions, please feel free to contact us, we will reply you within 12 hours..

2-Port SATA PCI-E 3.0 GEN3 Expansion Cardsupports SATA revision 3.0 transfer speeds of up to 6 Gbit s.. PCI-E 3.0 GEN3 chipset JMICRON JMB582, Supported IDE AHCI programming interface.. Plug and play, supports hot plugging.Just stuck it in and drives from old install started working.. 2 Port SATA 3.0 Interfaces - Compatible with Serial SATA Version 3.0 Complies with PCI-E 2.0 specification.. Compatible system Windows 1087 Vista XP 20032008 Linux..