Top 10 Best Pei

Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Note Please remove the transparent protective film on the surface before use.. Compatible with PLAPETGPEEKABS and any other filaments.. No more tape, no more glue, no more shovel, and release your printing anxiety.. Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.. When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print..

High-Quality MaterialMade of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70C.. Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.. Wide ApplicationThe PEI Printing Surface can compatible with PLAPETGPEEKABS and any other filaments. Perfect printing size works well with Creality Ender 3 Ender 3XEnder 3 ProEnder 5Ender 5 Pro.. Simple InstallationJust need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.. Official Creality 3D StoreMore than 20 engineers provide 247 customer service with 12-months limited and lifetime technical assistance. Please kindly contact usseller via ask a question find us directly rather than Creality Official Support Center , cause our customer service will respond to you within 24 hours no matter what question..

The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.. The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.. Excellent adhesion can be achieved when the temperature of the heated bed is about 60, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.. The size of HICTOP glass bed is 235235mm9.259.25inch, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 ProCR-20, CR-20 Pro and similarly sized machines..

Size - 235x235mm9.2x9.2in. Applicable models Ender 3 Ender 3 Pro Ender 3S Ender 3v2 CR 20 CR 20 Pro Ender 5 Ender 5 Pro, or other hot bed size 235x235mm9.2x9.2in model. Compatible with PLAPETGPEEKABS and any other filaments.. Excellent Adhesion Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand.. Easy to Install - The build surface adhesive comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate. High strength and reusable.. DIY - The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. Note - If you have any question or need technical support about the product, Please press Ask a question through our storefront's page, report an issue through the Your Orders page. We will respond with 24 hours..

Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms e.g. borosilicate glass. Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI simply peel back the tape liner for quick adhesion to the bed. Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints clean with isopropypl alcohol between prints or with acetone on a COLD bed. ABS and PLA filaments along with many other materials print directly on to PEI surface without the need for additional adhesives, tapes, or slurry. Dimensions 235 x 235mm PEI thickness 0.56mm 0.022 inches Laminated 3M 468MP adhesive thickness 0.13mm 0.005 inches Fits the Creality Ender 3 or Creality CR 20 perfectly.

Quality Materials 3-Layer Materials. The flexible spring steel platform in the middle, covered with PEI surface on it, and authentic 3M Magnetic Adhesive at the bottom are stable and durable.The maximum temperature for printing is 130 on the bed. Don't worry about the prints curling with a 60 bed temperature.. Mature Solution No glue, No tape, Excellent adhesion can be achieved when the temperature of the heated bed is about 60, just stick the magnetic bottom sheet onto the bed, then place the steel platform with PEI surface on the top.. Reuse For Multiple Prints Prints easily moved if bend the Magnetic plate when the heated bed reaches room temperature. then just wipe the surface with isopropyl alcohol and it can be reused as new.. Practical Features Flexible, removable, high strength and heat resistance, good adhesion to PLAPETGPEEKABS and any other filaments.The size 235x235mm is suit for Creality Ender 3 V2, Ender 3 Pro,Ender 3 Pros,Ender 5, Ender 5 Pro, CR-20, CR-20 Pro and similarly sized 3D printers. Quality Promise All products have UNDERGONE QUALITY INSPECTION before delivery. If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours..

Flexible, removable, can stick to magnetics very well. High strength and heat resistance.. Compatible with PLAPETGPEEKABS and any other filaments.. Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.. Suitable For Creality Ender 3Ender 3 ProEnder 5.

Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Suitable for Creality CR-10,CR-10S,Ender 3 MAX.. The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape. No more tape, no more glue, no more shovel, and release your printing anxiety.. Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.. When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print..

Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms e.g. borosilicate glass. Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI simply peel back the tape liner for quick adhesion to the bed. Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints clean with isopropypl alcohol between prints or with acetone on a COLD bed. ABS and PLA filaments along with many other materials print directly on to PEI surface without the need for additional adhesives, tapes, or slurry. Dimensions 220 x 220mm PEI thickness 0.56mm 0.022 inches Laminated 3M 468MP adhesive thickness 0.13mm 0.005 inches.