Top 10 Best Pei Sheet Ender 3 V2

Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.. Excellent Adhesion Excellent adhesion can be achieved when the temperature of the heated bed is about 60, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85.. Wide Application We use 75 thicker PEI and 25 thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 247 printing. Our magnet can also sustain higher temperatures of 120C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate. Easy Removal This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.. Wide Application The size of ender 3 PEI is 235235mm9.259.25inch. Please confirm the size of your 3d printer. After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers..

Excellent AdhesionEasy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60, PEI sheet without using any glue or other tools to help the model to stick onto the sheet.. Easy RemovalWhen used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.. Simple InstallationThe Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.. More Affordable and Practical We use 75 thicker PEI and 25 thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 247 printing. Our magnet can also sustain higher temperatures of 120CWear-Resistant and Scratch-Resistant, easy to clean There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.. Wide ApplicationThe size of Ender 3 PEI is 235235mm9.259.25inch. After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLAPETGPEEKABS and any other filaments..

WELL MADE PEI SHEET- Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Our PEI bed is flexible, removable, and pei sheet can stick to magnetics very well. High strength and heat resistance.. ALL NEW FUNCTIONALITY - The flexible surface of the ender 3 Pro PEI bed can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety.. EASY MODEL REMOVAL-The PEI spring steel 235x235 is easy to adhere to the printing surface, easy to remove the prints and flex slightly to pop your print right off.. HIGH RESSISTANCE-Our Ender 3 PEI build plate is used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.. WIDE APPLICATION - The PEI sheet 235x235 is perfect for Ender 3 Ender 3 Pro Ender 3S Ender 3v2 CR 20 CR 20 Pro Ender 5 Ender 5 Pro. Compatible with PLAPETGPEEKABS and any other filaments..

1 The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.. 2 The Pei Spring Steel 235x235 is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.. 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85. 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.. 5 The size of HICTOP PEI sheet is 235235mm9.259.25inch, it is applicable with Creality 3D printer such as Ender-3 ProNeo, Ender-3 V2NeoEnder-3Neo, Ender-5, Ender-5 ProCR-20, CR-20 Pro and similarly sized machines..

EXCELLENT FLATNESS - The smooth and flat surface is flexible and removable. The PEI sheet can stick to magnetics very well. High strength and heat resistance. Note Please remove the transparent protective film on the surface before use.. WEAR RESISTANCE - The golden yellow matte surface of PEI has strong high-temperature stability and high printing stability. Our PEI spring steel 235x235mm flame retardant has high-temperature resistance, high strength, wear resistance, and electrical insulation properties.. WIDE COMPATIBILITY - If the magnetic sticker is stuck to the bed, it won't be easy to remove. Therefore, please make sure that measure it correctly first before removing the adhesive and stick to the 3d printer heated bed. Suitable for Ender 3 Ender 3 Pro Ender 3S Ender 3v2 CR 20 CR 20 Pro Ender 5 Ender 5 Pro.Compatible with PLAPETGPEEKABS and any other filaments.. EASY MODE LREMOVAL - Easy to adhere to the printing surface, the ender 3 Pro PEI bed is easy to remove the prints and flex slightly to pop your print right off. The flexible surface can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.. HIGH-QUALITY MATERIAL - When the pei bed is used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print..

Kit Includes1 pcs Double-sided PEI sheet One side smooth PEI, one side textured PEI. 1 pcs Flexible adhesive backed magnetic base. Double-sided PEI sheets produced using advanced technology.. Easy to installStick the soft magnetic base to the heating bed of your 3D printer, then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.. Easy to useFor most filaments, no need for stick glue, tape or other adhesive. Good adhesion can be achieved when the temperature of the heated bed is around 60C. When the PEI building surface has cooled, the print can be easily removed by hand by simply bending the spring steel PEI slightly. The maximum printing temperature of PEI is 120C, it is compatible with most of filament, such as PLA ASA PLA ABS etc.. CompatibilityThe size of PEI sheet is 235235mm, not warped. It is compatible with most printers on the market with a build size of 220220mm. It is suitable for Ender 3 series, Ender 5Pro, CR 20Pro, Mega Pro, Kobra, AquilaC2S2X2, Odin-5 F3, Neptune X22S, Mingd D2, LK4 LK4 Pro, B1, A10MA10T and other 3D printers. If your 3D printer has a 235x235mm heat bed platform, This PEI sheet is compatible with your 3D printer.. Outstanding serviceIf there is a issues with the product you received, send us a message and we will help you out. If the product is damaged during use, we will replace it with a new one for you. Thanks..

TWO SIDES. TWO FINISHES - Fulament flex plate is made with high-quality spring steel that makes it a highly durable PEI sheet for 3D printing. We use 75 thicker PEI and 25 thicker spring steel, significantly increasing Fula-Flex longevity. Our PEI build plate is double-sided, with one textured and one smooth side. The textured powder-coated side of the PEI bed leaves a textured matte finish. The Smooth side leaves a glossy, reflective finish on the bottom of your print. EASY TO INSTALL - Fulament Ender 3 build plate is very easy to use. Simply stick the magnetic sheet onto your heated bed and place the flexible PEI build plate platform with a PEI surface on top. The Ender 3 magnetic bed surface holds the flexible build plate very tightly. Once you have finished printing, remove the spring steel plate, flex the print off, and snap the Fula-Flex back onto the magnetic sheet. Prints are removed easily without any scratches or damage. STRONG GRIP WHEN HEATED. EASY RELEASE WHEN COOLED - Keeping our customers' needs in mind, we build a 3D print mat that increases printing success. Our 3D printing mat grips the parts with strength when heated and releases them effortlessly when cooled. Print across the entire build ender 3 plate with confidence. The magnetic sheet can sustain higher temperatures of 130C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate. COMPATIBILITY - Fulament 3d printer magnetic build plate 235mm x 235mm fits Creality Ender3 Pro V2,CrealityCR-20, Ender 5 Ender 5 Pro, Artillery Genius Genius Pro, Artillery Hornet, TwoTrees Saphire Pro, Tevo Tarantula Pro, A10, Biqu B1, Elegoo Neptune 2, Voxelab Aquila, Anet et4, JGMaker Magic, Mega Zero, Longer LK4 Pro. FULAMENT'S PROMISE - Fulament is a USA-based company, and our products are made by enthusiasts for enthusiasts. We know you'll love our 3D printer bed mat as much as we do. All of our products feature a 12-month warranty PLUS knowledgeable tech support. If you have any kind of question or problem regarding our product, feel free to contact us, and we will be happy to assist you shortly. FULAMENT is a Trademark Registered Brand.

Pei sheet both sides of the double sided pei can be used, the front is textured and the back is smooth, which can meet your various needs. Buying one is equivalent to getting two printing platforms, which is very cost-effective.. Ender 3 v2 upgrades The PEI coating of this sheet is a special coating that can exhibit different physical properties at high and low temperatures. At high temperature, the adhesion is strong after cooling, the printed model can be easily demolded. Features of the pei bed easy to use Flexible, removable, No more tape, no more glue, no more shovel Strong adhesion Easy to adhere to the printing surface easy to remove flex slightly to pop your print right off Double Sided different textures, available on both sides, more durable.. The PEI is compatible with Ender 3 Ender 3 Pro Ender 3 v2 CR 20 CR 20 Pro Ender 5 Ender 5 Pro, or 3d printer hot bed size 235x235mm9.2x9.2in model. You can print PLAPETGPEEKABS and many other filaments with different temperature on it. Packing of the peia flexible double sided steel platform surface and a magnetic bottom sheet with adhesive on the back.

Hight Flatnesslong lasting Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for the bottom of model.long lastingThe service life of our pei is 10 times longer than other Glass Bed. easy to useEasy to clean simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.It can be cleaned easily with water or alcohol. New upgrade movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives. Reduce workload and save time. No Edge CurlingStrong adhesion The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges curling.Excellent adhesion can be achieved when the temperature of the heated bed is about 60, without using any glue or other tools to help the model to stick onto the sheet. Packing Textured steel platform coated with PEI surface 1 magnetic bottom sheet with adhesive on the back 1.