Top 10 Best Red Lion 2 Hp Sprinkler Pump

SHALLOW WELL JET PUMP Red Lion Premium Cast Iron Shallow Well Jet Pump features a 1-14 FNPT suction intake and 1 FNPT outlet discharge 12 HP pump can draw up to 12 gallons per minute. BUILT TO LAST Rugged cast iron casing and volute for long life and high-efficiency glass-filled thermoplastic impeller and diffuser for durability. HEAVY DUTY MOTOR runs on either 115 or 230 volts voltage must be selected to match incoming power source Includes a capacitor for increased starting power CSA listed in USA and Canada. INCLUDES a factory pre-set 3050 pressure switch that produces a working maximum pressure of 50 PSI and pressure gauge. SPECIFICATIONS 12 HP, 11.8 Amps at 115 Volts 5.9 Amps at 230 Volts 1-14-inch FNPT intake 1-inch FNPT discharge Max Pressure 65 PSI Max Head 150 Ft..

AUTOMATIC SUBMERSIBLE SUMP PUMP piggy-back tethered float switch activates pump when water level reaches 13 inches, shuts off pump when water falls down to 5 inches. BUILT TO LAST the Red Lion RL-SC Series features rugged cast iron housing, volute and clog-resistant impeller can handle semi-solids up to 38-inches. ENERGY EFFICIENT MOTOR 13 HP, 115-Volt, 4.4 Amp Permanent Split Capacitor PSC Motor with thermal overload protection CSA listed in the USA and Canada. PIGGY-BACK TETHERED FLOAT SWITCH activates pump when liquid reaches 13 inches and shuts off pump when water falls to 5 inches can be unplugged from pump for maintenancetesting. SPECIFICATIONS 12 HP, 4300 GPH at 0-ft, 5.3 Amps, 10-ft. power cord, 28-ft. shutoff, suitable for basins 18-inches or greater 1-12-inch FNPT discharge.

BUILT TO LAST Rugged cast iron pump housing and glass-filled thermoplastic impeller. MOTOR SPECIFICATIONS 230 VOLTS, 10.9 Amps, thermally protected, CSA listed in the US and Canada. EASY TO PRIME No additional priming is required after initial fill. UP TO 76 GPM at 10 PSI 64 GPM at 30 PSI - can handle up to 21 sprinkler heads with 12-inch fittings or 10 sprinkler heads with 34-inch fittings in each zone. SPECIFICATIONS 2.0 HP, 230 Volts, 2-inch FNPT intake 1.5-inch FNPT discharge, Max pressure 49 PSI.

Durable, cast iron pump for powering a sprinkler system. Item has a 2 diameter suction and a 1 12 diameter discharge. Has a heavy-duty, 1 horsepower motor. Thermoplastic impeller and diffuser provide durability. Pump has a maximum flow rate of 63 gallons per minute.

1 HP SHALLOW WELL JET PUMP Premium 1-HP jet pump is used for supplying fresh water to large homes, farms, and cabins. HEAVY-DUTY CAST IRON CONSTRUCTION This heavy-duty pump is designed with a 115230-volt motor with capacitor as well as corrosion and rust-resistant cast iron casing to ensure years of service and reliability. GLASS-FILLED THERMOPLASTIC IMPELLER AND DIFFUSER It has a glass-filled thermoplastic impeller and diffuser for high performance and efficient water flow. SHALLOW JET PUMP Ideal for shallow wells up to 25 feet in depth, the Red Lion RJS-100 1-HP Premium Shallow Well Jet Pump will get the job done. 115230 VOLT HEAVY-DUTY CENTURY MOTOR PUMP It also features 50 PSI and a 23 GPM flow rate with automatic shut-off, voltage selector for simple connection to existing power sources, a factory pre-set 3050 pressure switch.

Powered by industry standard 2- or 3-wire motors. Thermoplastic discharge and motor bracket. Stainless steel pump shell, control box included with all 3-wire pumps 12 HP to 1 HP. Built-in suction screen and check valve. 12 gpm and 22 gpm models available.

Jet pump and pre-charged pressure tank are factory assembled and ready to install. Pump casing is made of rugged cast iron. Pre-charged steel tank has a high grade diaphragm water chamber - 5.3 to 14 gallons. Low profile, compact horizontal pressure tank. Low profile, compact horizontal pressure tank. 3050 pressure switch. Can be set for use with 115 Volts or 230 Volts.

Powered by industry standard 2- or 3-wire motors. Thermoplastic discharge and motor bracket. Stainless steel pump shell, control box included with all 3-wire pumps 12 HP to 1 HP. Built-in suction screen and check valve. 12 gpm and 22 gpm models available.

Rugged cast iron casing and pump base. High efficiency thermoplastic impeller and diffuser. Bi models are configured with brass impeller, rlsp series can be set for use with 115 volts or 230 volts. 2 inch NPT suction and 1-12 inch NPT discharge, self-priming to 25'. Maximum pressures to 47 psi, flow rates to 89 U.S. Gpm , repair kits available.

Powered by industry standard 2- or 3-wire motors. Thermoplastic discharge and motor bracket. Stainless steel pump shell, control box included with all 3-wire pumps 12 HP to 1 HP. Built-in suction screen and check valve. 12 gpm and 22 gpm models available.

Shallow well jet pump - ideal for use in pumping at depths of 25' or less. Heavy-duty cast iron construction - for years of service and reliability. Includes factory pre-set 3050 pressure switch - produces up to 50 psi with automatic shut-off. 115230 volt heavy-duty motor - TEFC design with simple connection to existing power source. 1-14 inch FNPT intake, 1 inch FNPT discharge, repair kits are now available - for additional information Please see owner's manual.

Self-priming utility pump designed to lift water up to 25'. Corrosion resistant stainless steel pump housing ideal for operating lawn sprinklers, pressure boosting, and other general purpose applications. Heavy-duty 34 HP 115 volt motor for years of service and reliability. Glass-filled thermoplastic impeller and diffuser for high performance and efficient water flow. Power cord, carry handle, and garden hose adapter included for convenience and portability.