Top 10 Best Replacement Clock Movement Battery Operated

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.. Parameter I Shaft,drive long clock hands 10 mm to 450 mm Total shaft length is 18 mm 4564 inch, thread length is 5 mm 1364 inch,suitable for 1-3 mm 364 - 764 inch thickness clock panel.. DIY clock supplies the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.. Package contents 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions.. Warm notice when you install them, please keep the hour hand and minute hand parallel And please do not use too much pressure to avoid bending them..

Quantity package this battery clock replacement mechanism set comes with 5 quartz clock movements, 7 pairs of clock hands, 5 gaskets and 5 hang hooks, and the enough quantity to use and replace, provides a variety of styles to choose from, which can be applied for different styles of clock frames, clock replacement or making your own customized clock project. Size information the total length of the shaft is about 18 mm 0.7 inch, while the thread length measures approximately 11 mm 0.43 inch, which is suitable for clock panels with a thickness of 4 - 7 mm 0.16 - 0.28 inch, and the clock hands fit for a diameter of 25 - 35 cm clock surface, please check the size before installing with this clock accessories kit. Practical and durable the clock movement mechanism is powered by AA batteries not included, and the quartz DIY wall clock mobile mechanism has nice precision and is equipped with sweeping motion, which can provide the watchmaker with reliability and keep quiet when you are reading or sleeping. Reliable material these clock hands are made of quality aluminum, come in 4 vivid colors, and offer you a good opportunity for you to DIY your clock, lightweight and corrosion resistant, durable and practical so that they can be applied for a long time, providing you with a comfortable as well as quality usage experience and decorative effect. Extensive application these DIY quartz wall clock replacement movement parts are suitable for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and good for DIY quartz wall clock replacement movement parts In addition, it is suitable for repairing, replacing or making a clock.

PACKAGED WITH CARE Comes as a clock movement with 3 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping. CHOOSE THE SUITABLE MECHANISM this kit fit clock dials from 14 in - 12 in thick and is perfect for clock hands under 8 14 in long, making you smile of the memories your old clock gives you. DECORATIVE CLOCK HANDS Ornate sets for different options, perfect for your clock creations get to pick out the style and length of the hands that look best with your clock at no additional charge. ACCURATE TIME-KEEPING QUIET MOTOR features EMOON high precision clock mechanism, which offers watchmaker's accuracy and dependability equipped with sweeping motion, no ticking powered by a AA battery. KEEP TIME IN STYLE With EMOON clock hands and mechanism combo, you too can be a clockmaker perfect for clock replacement, repairing all kinds of clocks, or making your own customized clock project.

Good for repairing, replacing or making a clock.Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.. Material ABS. Size About 5.6 x 5.6 x 1.6cm2.2 x 2.2 x 0.6inch.. For DIY quartz wall clock replacement movement part, applicable frameless 3D Wall clock.. Made of ABS material, it is durable and long lasting use. Powered by 1 AA batterynot included.. Note this clock doesn't contain hook, they can't hang directly..

Two Pack Clock Movements are included. Accurate, High Torque and Dependable when in motion, and the second hand spins without any ticking. No Noise, provide a comfortable environment to sleep, work or study.. Six different style size Clock Hands are included. An appropriate style size set can fit for many clocks. All sets are good for replacement, repair and making of clocks.. The total length of the shaft of this clock Movement is 710in 17.5mm, with a thread length of 25in 10.5mm that allows a clock face up to 310in 7.5 mm thick. It can be used in a clock dial diameter from 4-13in to 9-67in by different clock hands set.. All items are placed firm in a custom foam insert to prevent scratching, bending, and other damage to enclosed items during shipping. Good ideal for a gift.. What You Get 2 non ticking clock mechanisms and 6 set clock hands. Also included 2 wall nails, 2 metal hooks, 2 plastic washers, 2 brass washers, 2 brass nuts and 1 instruction sheet. StFlyBro worry-free 36-month warranty and Friendly Customer Service.. Kindly Note Please check the Size of Clock Dial Thickness and Diameter carefully..

High torque clock movement with metal hook I shaft, drive long clock hands 10 mm to 450 mm, with 230 mm 9.1 inch long hand to fit dials up to 56 cm 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.. Accurate time-keeping motorSize-total shaft length is 20 mm 4 5 inch, thread length is 11.7 mm 9 20 inches suitable for 4 - 8 mm 4 25 - 3 10 inch thickness clock panel Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability powered by a AA battery.. Size from the center of the hole to the tip the hour hand is approx. 175 mm 6.9 inches long The minute hand is about 230 mm 9.1 inches in length.. Compatible clock applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements.. Warm notice when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before buying..

Clock movement replacement high torque clock with 2 hooks, long shaft, drive long clock hands 10 mm to 450 mm.. Movement size Total shaft length is 23 mm 2932 inch, thread length is 12mm 1532 inch,suitable for 4 - 8 mm 5 32 - 516 inches thickness clock panel.. Size from the hole center to the tip the hour hand is approx. 203 mm 8.0 inches long The minute hand is about 305 mm 12 inches in length.. DIY clock supplies the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.. Warm notice when you install them, please keep the hour hand and minute hand parallel And please do not use too much pressure to avoid bending them..

Measurement hand length total hour hand length approx. 172 mm 6.8 inches Total minute hand length approx. 207 mm 8.1 inches Second caps approx. 7 mm 0.3 inch.. Silent Movement total shaft length is 16 mm 4164 inch ,thread length is 8 mm 516 inch ,suitable for 2 - 6 mm 564 - 1564 inch thickness clock panel.. Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the shaft dimensions.. Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.material to make a clock by yourself.. Good DIY clock supply suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself..

Package includes you will get 3 clock movements, 3 sets of accessories, 3 wall clock hooks, 3 wall nails and 6 sets of different pointer kits, you can choose various styles according to your needs The replacement parts are suitable for maintenance, you can also change or make your own clocks Please note that the back is silver, and the front is as shown in the picture. Appropriate dimension the total length of the shaft is approximately 18 mm 0.7 inches, and the thread length is approximately 11 mm 0.43 inches, the clock movement mechanism is suitable for clock panels with a thickness of 1 - 3 mm 0.04 - 0.12 inches, and the clock hands fit for a diameter of 25 - 35 cm clock surface, please check the size before installing with this clock accessories kit. Quality material the movement is made of ABS material, and the clock hands are made of quality aluminum, which are lightweight and corrosion-resistant, they are strong and durable, and can be applied for a long time, providing you with a nice usage experience and decorative effect. Work effectively powered by AA batteries, the quartz DIY wall clock mobile mechanism has nice precision, which can provide the watchmaker with accuracy and reliability, will not produce annoying ticking sound, moreover, will provide you with a quiet environment. Multiple applications these clock movement mechanism parts are suitable for cross-stitch, 3-dimensional embroidery, craft clocks, frameless wall clocks, etc., they fit for replacing DIY quartz wall clocks very well, there is no doubt that they will bring a lot of convenience to your life.