Top 10 Best Riton Red Dot

This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint PlateSlide seamlessly.. The onoff switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.. Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.. Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.. If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability 99 that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.. ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cutoptic plate that is compatible with shield RMSRMSCDeltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cutoptic plate that is compatible with Trijicon RMRcc footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cutoptic plate that is compatible with Trijicon RMRSROHolosun 407C507C footprint.

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots.. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.. Included in the package are essential accessories to enhance your experience a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately..

Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero. Optic Shim is made to fit between the red dot and the mounting plate.. Fits Trijicon RMRSRO, Ade Advanced Optics, RD3-019, RD3-020, RD3-023, Holosun HS407CHS507CHS507T and. Also fits Riton X3 Tactix PRD, ADE RD3-011, Swampox KingslayerLibertyJustice. The shim might need to be trimmed to the shape to match some of red dot brand mentioned above.. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree.. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear..

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSRO red dots.. Compatible with Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. Finished in a Matte Black Anodize. Comes with two screws to connect this ADE optic plate to Trijicon RMR..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero. Optic Shim is made to fit between the red dot and the mounting plate.. Fits Trijicon RMRSRO, Ade Advanced Optics, RD3-019, RD3-020, RD3-023, Holosun HS407CHS507CHS507T and. Also fits Riton X3 Tactix PRD, ADE RD3-011, Swampox KingslayerLibertyJustice. The shim might need to be trimmed to the shape to match some of red dot brand mentioned above.. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree.. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

IMPROVED ACCURACY - Quick and easy to zero while holding up to strong recoil, this GlassFalcon Red Dot scope promotes rapid target acquisition with a crisp and clear 3 MOA dot.. EASY TO USE - The unique design of our gun sights makes for a hassle-free mount on just about any rifle or pistol setup. A lightweight, compact profile and intuitive controls ensure ease of operation.. HIGH-END OPTICS - All of our rifle and glock sights are tested by optics experts in the USA. The shockproof reflex Sight 3 MOA has been tested for 1000 rounds on all types of guns without losing your zero.. 100 SHOT VISIBILITY - The HD glass offers unbeatable clarity, with 10 brightness levels 8 day, 2 night for any lighting conditions. Perfect for target practice at the range, competitions or hunting. VERSATILE COMPATIBILITY - The weaverpicatinny rail mount is compatible with Vortex, Aimpoint, Holosun, Burris RDS, and more. Its scratch, water, and shockproof, and includes screws and wrenches..

Precision Quality Assurance-Every Riton product goes through a rigorous quality control process by a certified technician in Tucson, AZ. Each product you receive has undergone a thorough dual inspection process, being tested and inspected twice prior to making it to you.. Riton HD Glass-The Riton High Density HD glass delivers 99.5 light transmission for enhanced clarity and optimal sight picture.. Riton Performance Coating-Incorporating proprietary fully multi-coated lenses, all Riton optics feature low light enhancement, full wide band, anti-scratch and anti-reflective coatings for increased light transmission and overall lens performance.. Riton Rugged Construction -The Riton Rugged Construction incorporates the application of enhanced materials, precision machined components, and superior finishes. These industry proven materials and process ensure the protection of the optics through the most rugged applications.. 1 MOA Windage and Elevation Adjustment. Shake Awake And Auto Brightness Auto Off After 3 Minutes Without Motion. Night Vision Compatible. 50,000 hours battery life. Assembled in EP-Level Clean Room. 100 Waterproof, Fog proof and Shockproof tested up to 1500 Gs.

ACCURATE - Crisp 2 MOA red dot sight allows for accurate, both-eyes-open shooting. 11 red dot brightness settings provide optimal visibility in any light conditions. Multi-coated, scratch resistant amber lens provides enhanced image clarity.. DEPENDABLE - Fully waterproof with sealed housing IPX67. Lifetime Warranty. Shockproof circuitry resists damage from rough handling. Matte black anodized finish resists scratches while keeping a stealthy profile.. INCREDIBLE VALUE - Exceptional battery life up to 50,000 hours at the lowest brightness setting. Genuine Renata CR2032 Lithium battery included. Factory direct pricing - no distributor markup.. LIGHTWEIGHT MOUNT AND ARMOR - Includes Med .83 Cantilever Riser Mount for absolute cowitness with iron sights, and rubberized cover with integrated lens caps. INSIDE THE BOX - Red dot sight, 0.83 PRO-MOUNT Riser, RD-ARMOR Optic Cover, CR2032 Battery, Rubber bikini cover, Instruction sheet, Lens cloth, Allen wrench.

The new 2019 Strikefire II Red Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications allowing users to operate between 11 illumination settings with the lowest two settings being night vision compatible.. With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II Red Dot runs off a CR2 battery and has been updated with improved battery life up to 80, 000 hours at setting 6.. An offset cantilever mount is provided allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail.. Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition.. The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purged and o-ring seals ensure fogproof and waterproof performance.. Included Components Strikefire Ii Red Dot Led Upgrade.

Fast-Focus Eyepiece Features Ambidextrous, Spring Assisted, Two Position Mount. Assembled in EP-Level Clean Room 100 Waterproof, Fog Proof and Shockproof tested up to 1200 Gs. Aircraft Grade Aluminum with Rugged Design Ready for the Toughest Environments. Lens Coating Fully Multi-Coated, Full Wide Band, Waterproof Coated, Low Light Enhancement. Parallax Adjustments Fixed at 50 yards Focal Lens Position Second Focal Plane.

1 MOA Windage and Elevation Adjustment. Assembled in EP-Level Clean Room. 100 Waterproof, Fog proof and Shockproof tested up to 1200 Gs. Shake Awake and Auto-Off. Night Vision on Settings 1 and 2.