Top 10 Best Rohn Antenna Mast

of November 2024
1
Best ChoiceBest Choice
ROHN H50 43' Telescoping Mast
ROHN
ROHN
10
Exceptional
View on Amazon
2
Best ValueBest Value
ROHN WM24D Double Wall Mount with 24" Stand Off - Masts 7/8" to 2-3/4" OD
ROHN
ROHN
9.9
Exceptional
View on Amazon
3
ROHN FRM238 Non-Penetrating Roof Mount with 2.38" OD x 0.154" Wall x 30" Mast
ROHN
ROHN
9.8
Exceptional
View on Amazon
4
ROHN FRM238SP5 Non-Penetrating Roof Mount Bundle - 2.38" x 0.154" Wall x 60"
ROHN
ROHN
9.7
Exceptional
View on Amazon
5
ROHN FRM238SP5 Non-Penetrating Roof Mount - 2.38" OD x 0.154" Wall x 60" Mast
ROHN
ROHN
9.6
Exceptional
View on Amazon
6
ROHN Guy Ring and Clamp Assembly for up to 2" Antenna Masts - 2.00"
ROHN
ROHN
9.5
Excellent
View on Amazon
7
ROHN WM24S Wall Mount with 24" Stand Off - for Masts 7/8" to 2-3/4" OD (R-WM24S)
ROHN
ROHN
9.4
Excellent
View on Amazon
8
ROHN WM12D Double Wall Mount with 12" Stand Off - Masts 7/8" to 2-3/4" OD
ROHN
ROHN
9.3
Excellent
View on Amazon
9
ROHN FRM150 Non-Penetrating Roof Mount with 1.50" x 30" Mast - Satellite WiFi
ROHN
ROHN
9.2
Excellent
View on Amazon
10
ROHN Guy Ring and Clamp Assembly for up to 1-1/2" Antenna Masts - 1.50"
ROHN
ROHN
9.1
Excellent
View on Amazon

About Rohn Antenna Mast

Click here to learn more about these products.

ROHN H50 43' Telescoping Mast

527 Total Extended Pipe Length - Actual assembled height will be slightly less due to overlapping. All sections are 18 gauge except for top which is 16 gauge. Weighs 46 lbs Bottom 2-14 OD, Top 1-14 OD. Shipping Length 123. Pre-galvanized for corrosion protection Comes assembled with hardware Top rings are adjustable based on antenna mounting. Ships via freight truck only. See below for important shipping details. Be sure your contact number is current on your order for freight delivery. 1. Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts. 2. All installations must be bracketed or guyed. 3. The pictured guy layouts are for a typical installation. Individual installation requirements may vary. 4. Antenna load top load should not exceed an effective projected area EPA of 2 square feet see your antenna specifications..

ROHN WM24D Double Wall Mount with 24" Stand Off - Masts 7/8" to 2-3/4" OD

HEAVY DUTY DOUBLE 'Y' STYLE BRACKETS. 2 BRACKETS INCLUDED AS SHOWN.. GALVANIZED STEEL WALL MOUNT PROVIDES 24 CLEARANCE TO THE WALL.. MASTS ARE HELD IN PLACE WITH 2 UNIQUE 'ANTI-TWIST' LOCKING SCREWS. CLAMP ACCEPTS 78 TO 2-34 OD MAST TUBES.. CAN BE USED ON MASONRY, WOOD, METAL, OR OTHER TYPES OF WALLS USING UP TO 14 LAG SCREWS OR BOLTS NOT INCLUDED.

ROHN FRM238 Non-Penetrating Roof Mount with 2.38" OD x 0.154" Wall x 30" Mast

NON-PENETRATING ROOF MOUNT FOR SATELLITE DISHES, WIRELESS INTERNET ANTENNAS, ETC. FOR USE WITH 16 NOMINAL CONCRETE BLOCKS TO ANCHOR TO ROOF NOT INCLUDED. PRE-GALVANIZED FOR CORROSION PROTECTION. HEAVY DUTY 2.38 OD x 0.154 Wall x 30 MAST INCLUDED. 3' SQUARE BASE. ROOF MAT NOT INCLUDED SEE FRMMAT. GOES TOGETHER QUICKLY.

ROHN FRM238SP5 Non-Penetrating Roof Mount Bundle - 2.38" x 0.154" Wall x 60" Galvanized Mast + Rohn FRMMAT Roof Mat

NON-PENETRATING ROOF MOUNT BUNDLE FOR SATELLITE DISHES, WIRELESS INTERNET ANTENNAS, ETC. FOR USE WITH 16 NOMINAL CONCRETE BLOCKS TO ANCHOR TO ROOF NOT INCLUDED. PRE-GALVANIZED FOR CORROSION PROTECTION. GOES TOGETHER QUICKLY.. 2.38 X 0.154 X 60 MAST PIPE INCLUDED. 3' SQUARE BASE. 18 THICK x 42 x 36 ROHN FRMMAT ROOF MAT INCLUDED TO PROTECT ROOF FROM FRAME RAILS. MOUNT AND MAST WEIGH 53 LBS. MAT WEIGHS 5 LBS. Note Tubes feature a tab so that they can be hung during galvanizing. They can be knocked off or bent inside the mast.

ROHN FRM238SP5 Non-Penetrating Roof Mount - 2.38" OD x 0.154" Wall x 60" Mast

NON-PENETRATING ROOF MOUNT FOR SATELLITE DISHES, WIRELESS INTERNET ANTENNAS, ETC. FOR USE WITH 16 NOMINAL CONCRETE BLOCKS TO ANCHOR TO ROOF NOT INCLUDED. PRE-GALVANIZED FOR CORROSION PROTECTION. GOES TOGETHER QUICKLY.. 2.38X 0.154 WALL X 60 MAST PIPE INCLUDED. 3' SQUARE BASE. ROOF MAT NOT INCLUDED SEE FRMMAT. WEIGHS 53 LBS Note Tubes feature a tab so that they can be hung during galvanizing. They can be knocked off or bent inside the mast.

ROHN Guy Ring and Clamp Assembly for up to 2" Antenna Masts - 2.00"

ROHN 2 Guy Ring Mast Clamp Assembly. 1 2.00 Guy Ring ROHN Part Number GR4 1 2.00 Mast Clamp Bolt Assembly ROHN Part Number C4A. Attaches guy wire to your antenna mast up to 2.00 OD. Genuine ROHN Hardware. OEM Factory Hardware. Pre-Galvanized Steel.. Installation Instructions Slip ROHN clamp assembly and ROHN guy ring over the antenna mast. Tighten bolt on clamp assembly to fasten to your mast. Guy ring will rest on top of clamp assembly. Attach 3-4 guy wires from different angles from your ROHN guy ring to support structure and remove any slack from each wire. Adjust guy wires until antenna mast is vertical. Guy wire ring should rotate freely on the mast for easy manipulation..

ROHN WM24S Wall Mount with 24" Stand Off - for Masts 7/8" to 2-3/4" OD (R-WM24S)

HEAVY DUTY SINGLE 'Y' STYLE BRACKET. GALVANIZED STEEL WALL MOUNT PROVIDES 24 CLEARANCE TO THE WALL.. MASTS ARE HELD IN PLACE WITH A UNIQUE 'ANTI-TWIST' LOCKING SCREW.. CLAMP ACCEPTS 78 TO 2-34 OD MAST TUBES.. CAN BE USED ON MASONRY, WOOD, METAL, OR OTHER TYPES OF WALLS USING UP TO 14 LAG SCREWS OR BOLTS NOT INCLUDED.

ROHN WM12D Double Wall Mount with 12" Stand Off - Masts 7/8" to 2-3/4" OD

HEAVY DUTY DOUBLE 'Y' STYLE BRACKETS. 2 BRACKETS INCLUDED AS SHOWN.. GALVANIZED STEEL WALL MOUNT PROVIDES 12 CLEARANCE TO THE WALL.. MASTS ARE HELD IN PLACE WITH 2 UNIQUE 'ANTI-TWIST' LOCKING SCREWS. CLAMP ACCEPTS 78 TO 2-34 OD MAST TUBES.. CAN BE USED ON MASONRY, WOOD, METAL, OR OTHER TYPES OF WALLS USING UP TO 14 LAG SCREWS OR BOLTS NOT INCLUDED.

ROHN FRM150 Non-Penetrating Roof Mount with 1.50" x 30" Mast - Satellite WiFi

NON-PENETRATING ROOF MOUNT FOR SATELLITE DISHES, WIRELESS INTERNET ANTENNAS, ETC. FOR USE WITH 16 NOMINAL CONCRETE BLOCKS TO ANCHOR TO ROOF NOT INCLUDED. PRE-GALVANIZED FOR CORROSION PROTECTION. 16 GAUGE, 1.66 X 30 MAST INCLUDED. 3' SQUARE BASE. ROOF MAT NOT INCLUDED SEE FRMMAT. GOES TOGETHER QUICKLY.

ROHN Guy Ring and Clamp Assembly for up to 1-1/2" Antenna Masts - 1.50"

ROHN 1-12 Guy Ring Mast Clamp Assembly. 1 1.50 Guy Ring ROHN Part Number GR2 1 1.50 Mast Clamp Bolt Assembly ROHN Part Number C2A. Attaches guy wire to your antenna mast up to 1-12 OD. Genuine ROHN Hardware. OEM Factory Hardware. Pre-Galvanized Steel.. Installation Instructions Slip ROHN clamp assembly and ROHN guy ring over the antenna mast. Tighten bolt on clamp assembly to fasten to your mast. Guy ring will rest on top of clamp assembly. Attach 3-4 guy wires from different angles from your ROHN guy ring to support structure and remove any slack from each wire. Adjust guy wires until antenna mast is vertical. Guy wire ring should rotate freely on the mast for easy manipulation..
Disclaimer