Top 10 Best Scope Mounts 1 Inch

ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Fits 1 riflescope tube. Mounting rings are pushed forward 2 for better eye relief.. Designed for mil-spec upper receivers with 1913 Picatinny rail. Designed for mil-spec upper receivers with 1913 Picatinny rail. Superior clamping surface to insure maximum rail engagement. Does not require proprietary tools for adjustment. Height 1.5. Weight 4.2oz. Screw Torque - 15 in-lbs. Ade Limited Life Time Warranty..

This is a 1 inch one piece riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.5. Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

These Vortex Hunter Rings position the center of the riflescope tube at a height of 1.22 inches 31.0 mm from the base.. Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.. Made from aircraft-grade 6061-T6 aluminum for optimum strength.. Sold two rings per package..

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount. Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld. 1 inch diameter rings for mounting standard 1 inch rifle scope tubes. Base is compatible with Picatinny mounting systems Not compatible with Weaver mounts. Available in four heights to match your needs 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

Use this cantilever mount for mounting 1-inch telescopic sights. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement. The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches 40.39 mm from the base. Weighs 6.7 ounces. Aluminum construction.

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0.75 inches 19.05 mm from the base. Sold two rings per package.. The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.. Fits Weaver and Picatinny Rails.. Weight Per Ring 39.9 Grams - 1.41 oz.

Perfect for All 21mm Picatinny Weaver RailsModkin 4 Set of Different Heights 1 inch Scope Mount Rings Include 2 Pieces Medium Profile 2 Pieces High Profile In One Package. Our Scope Rings Perfect for All 21mm Standard Picatinny Weaver Rails, Available In Two Styles For Your Choice, A Must Have Scope Rings for Hunting Shooting Perfect for Mounting Most Scopes Which Are In 1 inch 25.4mm Scope Tube.. Hollowed-Out Design Built-In Tape ProtectionDesign In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Position Accurately.. Premium Aircraft Aluminum, Solid DurablePrecision Machining of Aircraft Grade 6061 Aluminum Alloy High Strength Steel In Black Matte Anodizing Finish, Sturdy Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field.. Rail Clamp Screw Design Easy To InstallWith 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1 inch Scope Firmly, Just Twist OnOff The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pieces Allen Wrench.. 4 Set Of Two Styles 1 inch Scope Rings2 Pieces Medium Profile - 0.5 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 1.9 inch - Dimension 1.9 x 1.6 x 0.8 Inch - Weight 2 Ounce Per Ring 2 Pieces High Profile - 0.71 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 2.0 inch - Dimension 2.0 x 1.6 x 0.8 Inch - Weight 2 Ounce Per Ring..

Dual ring scope mount for mounting standard 1 inch tube rifle scopes. Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount. Mounts to any flat top Picatinny rail equipped rifle. 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position. 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings.

For receivers with Mil-Spec 1913 Picatinny rails. Rear ring pushed 1 forward for better eye relief. 6061 T6 extruded aluminum anodized black finish. Department Name Unisex-Adult.

Perfect for All 21mm Picatinny RailsLONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1'' 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting. 4 Set Of Two Styles 1'' Scope Rings2 Pcs Medium Profile 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring 2 Pcs High Profile 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.. Hollowed-Out Design Built-In Tape ProtectionDesign in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.. High Quality Aluminum, Solid DurablePrecision machining of aircraft grade 6061 aluminum alloy high strength steel in black matte anodizing finish. Sturdy lightweight construction, build no wobble, offer durable safe performance in the field.. Rail Clamp Screw Design Easy To InstallWith 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist onoff the rail clamp screw nut via allen wrench and mount the base on 21mm rail, simple and quick to remove or install. Comes with 2 pcs allen wrench..

CNC Machined from 6061 T6 aircraft grade Aluminum that fits 1inch scopes. Ultra Rigid and Light-Weight with recoil reduction design and slim profiles for added rigidity. 2.5 Inches of forward extension for better eye relief. Mounts on all Mil-Spec 1913 Picatinny rails. Extremely light weight at 4.2OZ and covered by ARKEN Life time warranty.

Vortex Pro 1 inch cantilever ring mount provides the correct height and forward placement for proper scope mounting.. The cantilever ring mount positions the center of the riflescope tube at a height of 1.435 36.45mm from the base.. Made with pride in the USA..